PROVISION OF TOILET COMPLEX FOR STUDENT OFFICERS LADIES GENTS AND ASST INSTRS GENTS ONLY AT KURUKSHETRA TRAINING AREA UNDER GE I GOS

Amount

M&L for Excavating in trenches in soft/ loose soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Excavating in trenches in soft/ loose soil, exceeding 1.5m wide and not exceeding 3.00 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in chajja and the like complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, Flat, with fair finished surfaces complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (sqaure, rectangular or polygon) with fair finished surfaces complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Flat, with fair finished surfaces complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat, with fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as speified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed..

M&L preparation of newly plastered surfaces and applying three coats of white wash but on ceiling complete all as specified and as directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F Plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or alumnised hinging device complete all as specified & as directed.

S&F 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified & as directed.

S&F Angle Stop Valve 15 mm bore fancy type chromium plated with wall flange complete all as specified and directed.

S&F Hand shower (Health faucet) with 1 mtr long Easy flex tube in chrome finish & wall hook complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed.

S&F Ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S&F PP-R globe or gate valves screwed both ends for PPR Pipes of 20 mm bore dia of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F WHB under counter-type of size 560 x 430 x 195 mm oval shape including Couplings complete all as specified and directed.

S&F Bottle trap chromium plated for WHB as per approved quality all as per specified and directed.

S&F Vitreous china urinal partition white of size 310 x 700 mm complete all as specifeid and directed.

S&F PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement all as specified and directed.

S&F Sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F Coloured Toilet paper holder, vitreous China, box type complete all as specified and directed.

S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Bib taps fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer with properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

All as per item no. 80 but Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.

All as per item no. 80 but Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.

All as per item no. 80 but Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L Salt glazed stone ware gully traps size 150 x 150mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed. (Note: CI grating will be meaured separately).

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L Excavating over areas in soft/ loose soil , n exc 1.5 m deep and getting out complete all as specified & directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with grey pigment cement and pigments complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Material and labour for one light point controlled by one 10amps switch, one way point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed. (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only) Make :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab (2) PVC conduit (MMS)/PVC Casing & Caping & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd

All as per item No.94 aboveOne exhaust fan point controlled by one switch 10 amps.

All as per item No.94 above but one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item No.94 above but one 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.96 & 97 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board complete all as specified and directed.

All as per item No.98 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm forone 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.96 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells / Crompton/Philips

Supply and fixing 20 watts LED Austra mirror smart light fitting one feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :-Havells / Crompton/Philips

Supply and fixing LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and complete all as specified and directed. Make :Havells / Crompton/Philips

Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Havells / Crompton/Philips

Supply and fixed in repairs LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells / Crompton/Philips

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :-Havells / Crompton/Philips

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,TPN DB, 12 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and complete all as specified and as directed.Make:-Legrand ABB/Havells

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells or as approved make

Supply & fix and MCB TPN 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fix new exhaust fan, steel/PVC body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 16 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material and labour for PVCinsulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc

M/S SIWALIK AND CO

HARAGOURI SUPPLIERS

M/s Ats Electricals

R K Traders

M/s MAA BHAIRABI ENTERPRISES

DHABALESWAR ENGINEERING WORKS

M/S S.K GHOSE