Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | LI₹57.0 LAccepted-AOC ASSAM AS | LI | Accepted-AOC responsive | |
| 2 | LII₹57.6 LRejected-AOC | LII | Rejected-AOC responsive | |
| 3 | LIII₹57.6 LRejected-AOC BALUGA SABJIBARI P O SUKHANPUKHURI TINSUKIA ASSAM | TINSUKIA | TINSUKIA | ASSAM | LIII | Rejected-AOC responsive |
Tender Value
₹57.0 L
EMD Value
₹1.1 L
Closing Date
15 Nov 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer, PWD Dibrugarh Building Ci
Superintending Engineer, PWD Dibrugarh Building Circle, Dibrugarh
Construction of Cultural Centre at Nazirating tourist place Tinsukia Assam for implementation of PMKKKY under DMF for the year 2022-23
2022_PWBNH_27653_1
SE(B)/DIB/CS-10/22-23/866-A
Open Tender
Civil Works - Building
Item Rate
270 days
Nazirating tourist place Tinsukia Assam
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,141
₹1.1 L
Yes
Superintending Engineer, PWD Dibrugarh Building Ci
18 Jan 2023
9 Nov 2022
15 Nov 2022
9 Nov 2022
15 Nov 2022
9 Nov 2022
10 Nov 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Stirrups (Ground Floor )
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Suspended floors, roofs, landings, balconies and access platform
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) Sub-Structure
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre laminated conforming to IS : 12823, Grade 1, Type - II marked :
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. 1:4 (1 cement: 4 fine sand)
20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. 1:4 (1 cement: 4 fine sand)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer?in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.51.1 Ridges plain (500 - 600mm)
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 100x75x3.50mm
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
12mm Cement plaster of mix (a) In cement mortar 1:4
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6. (1cement : 6 fine sand)
Steel reenforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo -Mechanically Treated bars of grade Fe-500D or more.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer
Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)
Providing and fixing whith vitreous china flat back or wall corner type lipped front from urinal casin of 430x260x350mm and 340x410x265mm size respectively with automatic flushing etc. Etc. One urinal basin with 5 letre white P.V.C. Authomatic flushing cistern.
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.7 White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.2 510x1040 mm bowl depth 225 mm
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.1 32 mm dia.
Providing and fixing 100mm s/s grating for gully trap. (as per market rate)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.1 Circular shape 450 mm dia
Rectangular shape 1500x450mm
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Providing and fixing toilet paper holder : 17.34.1 C.P. Brass
Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia. 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729
17.35.2 : 75 mm diameter : 17.35.2.1 : Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 17.36.1 75 mm dia pipe
17.36.2 100 mm dia pipe
Providing and fixing plain bend of required degree. 17.39.1 100 mm dia 17.39.1.1 Sand cast iron S&S as per IS - 1729
Providing and fixing plain bend of required degree 17.39.2 75 mm dia 17.39.2.1 Sand cast iron S&S as per IS -1729
Providing and fixing heel rest sanitary bend 17.40.1 100 mm dia 17.40.1.1 Sand cast iron S&S as per IS - 1729
17.40.2 75 mm dia 17.40.2.1 Sand cast iron S&S as per IS - 1729
Providing and fixing double equal plain junction of required degree. 17.42.2.1 Sand cast iron S&S as per IS - 1729
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 100x100x100 mm 17.43.1.1 Sand cast iron S&S as per IS - 1729
17.43.2 75x75x75 mm 17.43.2.1 Sand cast iron S&S as per IS - 1729
17.44 Providing and fixing single equal plain junction of required degree : 17.44.1 100x100x100 mm 17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
17.44.2 75x75x75 mm 17.44.2.1 Sand cast iron S&S as per IS - 1729
17.44.2.2 Sand cast iron S&S as per IS - 3989
Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 17.45.1 100x100x75x75 mm 17.45.1.1 Sand cast iron S&S as per IS - 1729
17.45.1.2 Sand cast iron S&S as per IS - 3989
Providing and fixing double unequal plain junction of required degree : 17.46.1 100x100x75x75 mm 17.46.1.1 Sand cast iron S&S as per IS - 1729
17.46.1.2 Sand cast iron S&S as per IS - 3989
Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.53.1 76 mm off sets 17.53.1.2 With 100 mm dia pipe
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 17.55.1 100 mm 17.55.1.1 Sand cast iron S&S as per IS - 1729
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 17.55.2 75 mm 17.55.2.1 Sand cast iron S&S as per IS - 1729
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 17.57A.1 100 mm dia 17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket
17.57A.2 75 mm dia 17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 17.58.1 100 mm
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.59.1 100 mm
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.1 100 mm inlet and 100 mm outlet 17.60.1.1 Sand cast iron S&S as per IS: 3989
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes
18.8.2 20 mm nominal dia Pipes
18.8.3 25 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.1 15 mm nominal dia Pipes
18.9.2 20 mm nominal dia Pipes
18.9.3 25 mm nominal dia Pipes
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.20.1 15 mm nominal bore
18.20.3 25 mm nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.1 30 cm length 18.21.1.1 15 mm nominal bore
18.21.1.2 20 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.22.2 150 mm diameter
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Supplying and fitting c.p. Pillar cock best quality as approved (as per market price) 15mm nominal bore
Supplying and fitting c.p. bip cock best quality as approved (as per market price) 15mm nominal bore
Supplying and fitting c.p. stop cock best quality as approved (as per market price) 15mm nominal bore
Supplying and fitting c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved mark and quality as per direction of Engineer-in-charge.
Providing fixing hand shower best quality as approved (as per market rates)
Providing fixing hand face including all fitting best quality as approved (as per market rates)
Providing and fixing single liver wall mixer best quality as approved (as per Market rate)
Providing and fixing soap Dish Holder having length of 138mm, breadth 102 mm height of 75mm with conceraled fitting arrangments weighing not less than 106 gms.
Providing & Fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15mm nominal bore.
Making soak pit 2.5 m diameter 3.0metre deep with 45x45cm dry brick honey comb shaft with bricks and S.W. Drain pipe 100mm diameter. 1.8m long complete as per standard design. With common burnt clay F.P.S. (non Modular) Bricks of class designation 7.5
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required Group - A Upto 3 Mtr.
Group - B Upto 3 Mtr.
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface etc. 2x2.5sq.mm+1x2.5sq.mm earth wire
2x4 sq.mm+1x 4 sq.mm earth wire
2x 6 sq.mm+1x 6 sq.mm earth wire
Supplyig and fixing of following sizes of medium class PVC conduit conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
Supplying and fixing following modular switch / socket on the existing modular plate & swith box ncluding connections modular plate etc. As required. 5/6 A Switch
15/16 A switch
25A Single Phase DOL Starter for AC Units
3 pin 5/6 A socket outlet
6 pin 15/16 A socket outlet
Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc. As required. 3 Module (100mmx75mm)
6 Module (200mmx75mm)
8 Module (125mmx125mm)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 a modular switch etc.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 a modular switch etc.
Spply of light fixtures / fittings as per the details given below including necessary hardware such as clamp, nuts, bolts, nails, screws and suspension chains as required Wall Mounted Light Fixture- Wattage -14-18W, CCT -4000 K
Supply, installation, testing and commissioning of led fixture Surface Mounted 4 Feet with Polycarbonate diffuser with aluminium housing having following technical specifications with all accessories including etc. (i) Minium Iumen output 4000 lumen (ii) System lumen efficacy >110 lm/watt. (iii) CCT >5700, CRI.80, PF.0.95, THD,10%, IP 40. (iv) L 70 rated life of 50 k hours. (v) in built surge protection device of minimum 2.5 KV.
Supply, Installation, testing & commissioning or Surface type batten LED fitting minimum length 2 Feet with extruded aluminium housing having following technical specifications with all accessories directly etc. (i) Minium Iumen output 1000 lumen (ii) System lumen efficacy >100 lm/watt. (iii) CCT >6500, CRI.80, PF.0.95, THD,20%, IP 40. (iv) L 70 rated life of 50 k hours. (v) in built surge protection device of minimum 2.5 KV.
Dsupply, Installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, Celling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. Blades, 30cm long down rod, 2 Nos. Canopies, etc.
Supplying, Installation, Testing and Commissioning of single phase 300mm Sweep, 900/1400 RPM heavy duty propeller type exhaust fan operation on 220-240 V, 50Hz Acelectricity, in the existing etc. 13.1. Upto 450 mm sweep
Extra for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes.
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connection etc. As required. 250 A, 36KA, FPMCCB
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface / recess, complete with tinned etc. 12 way, Double door.
Supplying and fixing of following ways surface / recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel dust protected duly etc. As required. 6 way (4+18), Double door.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10Ka, "C" Curve, Miniature circuit breaker suitable for inductive load of following poles inthe etc. Single pole
Triple pole and neutral
Supplying and fixing following rating, four pole, (Three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having asensitivity etc. 25A
Supplying, Installation, testing & commissioning of cubical type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz Ac supply system fabricated in compartmentalized designd from CRCA sheet steel of 2mm thick for frame work and etc. (i) 1 Nos. 250 Amps 3 pole, 50 KA Manual draw out type ACB with microprocesor basd release for protection .. 1 Set of 4 strip PVC sleeved Al. Bus Bar 400 Amps. Capacity. 1. No. three phase multitunctional / intelligent digital panel meter cum ... 4 Nos. 100 Amps. 3 Pole MCCB 16 KA with rotary handle. 1 Nos. Space for 100 Amps. TP MCCB. (Note :- All the MCCBs shall be lcs = 100% lcu)
Laying and fixing of one number PVC Ssheathed / XLPE power cable of 1.1 KV grade of following size as required. 21.1. Above 35sq.mm and upro 95 sq.mm
Earthing with copper earth plate 600mm x 600mm x3mm thick including accessories , and providing masonry enclosure with cover plate having etc.
Earthing with G.I. Earth plate 600mmx 600mmx6mm thickincluding accessories, and proving masonry enclosed with cover plate havig etc. As required.
Providing and fixing 125mmx5mm copper strip in 40mm dia G.I. Pipe from earth electrode including connection with brass nut, bolt etc. As required.
Providing and fixing 25mm x 5mm G.I. Strip in 40 mm dia G.I. Pipe from earth electrode including etc. As required.
Providing and fixing 25 mm x 5mm G.I. Strip on surface or in recess for connections etc. As required.
Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc. As required.
Earthing with G.I. Earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate etc.
Supplying and laying 6 SWG G.I. Wire at 0.50 metre below ground level for conductor earth electrode, including connection etc. As required.
Providing and fixing M.V. Danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous etc. As required.
CO2 type Fire Extinguisher ISI marked conforming to IS : 15683,. Capacity 4.5 kg. Complete with delivery hose horn, etc. As required.
Supply, installation, testing and commissioning of LED street light fitting in pressure die cast aluminium body with glass / PC cover complete with inbuilt driver, etc. As required. (i) Minimum lumen output 4500 lumen. (ii) System lumen efficacy .120 lm/ Watt. (iv) CCT. 5700, CRI.80, PF.0.95,10% Ip 66. (v) L70rated life of 50K hours. (vi) In built surge protection device of minimum 4KV,
Supplying and Erection of 6 Mtrs. Long G.I. Octagonal Pole with bottom dia 130mm top dia 70mm, company fabricated with 3mm thick GI sheet and base plate of size 200mm x200mmx 12mm G.L. Sheet I/C 4 Nos. Foundation etc. As required. Single arm GI bracket 1 mtr long
Design, manufacture, supply, installation, testing and commissioning of outdoor typeexternal lighting feeeder pillar of suitable size not less than 30cm. And upto 45 cm deep made out of M.S. Sheet 2mm thick etc. As required. Supplying, Installing & fixing of following accessories in the existing cubical etc. as required. Power contactor 1 sets of single pole of suitable ratings. The above board shall be complete with 1 no. phase indicating lights, flush mounted Ammeter, etc. External Lighting Feeder Pillar :- BAR : 100 AMP, 500 Volts, 1 phase 50 HZ 2P high conductivity electolytic Aluminium bus bar. etc. OUT GOING : 4 nos. 6-32 AMP DP MCB (10KA).
Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, amoured, served sheathed 1100 volts grade -4 2 Core Direct in ground as required.
Earthing with copper earth plate 600mm x 600mmx3mm thick includingaccessories, and providing masonry enclosure with cover plate having etc. As required.
Earthing with G.I. Earth plate 600mmx 600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having etc. As required.
Providing and fixing 25mmx5mm copper strip in 40mm dia G.I. From earth electrode including connection with brass nut, bolt, suring, washer etc. As required.
Providing and fixing 25mm x5mm G.I. Strip in 40mm dia G.I. Pipe from earth electrode including connection with G.I. Nut, bolt, spring washer excavation and re-filling etc. As required.
Bitupan Sharma
Ram Swarup Yadav
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .