PROVN OF CAR PARKING FOR OFFICERS FOR P-61 (CHANAKYA BLOCK) FOR OFFICERS MD ACCN AND HARD STANDING AND WATER TANK STAGING FOR BLDG NO T-1, T-2 UNDER AGE B/R WEST UNDER GE (WEST) COLABA

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all specified & directed.

Removing excavated material nexc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil all specified & directed.

M&L broken stone or boulders of hardcore of gauge nexc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all a specified and directed.

M&L for MIXED CEMENT CONCRETE DELIVERED ON BUNKER 100 mm thick type 1, 1:4:8 (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L PCC 1:3:6, type B-1 (using 20 mm graded crushed stone aggregate) chamfered on edged, struck finished all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast grass concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 30 mm compacted thickness bed of coarse sand, filling the joints with fine sand including providing grass on surface all specified & directed.

M&L rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand all specified & directed.

M&L for two coats of epoxy concrete floor coating on surface (consists of hardner and resin ) over one coat of primer for creating a bonding between epoxy and concrete surface. before applying, prepare the surface from any undulation (using wire brush or electric floor scrubber, Etching) removing all oil and grease stain if any, and brooming the surface clean to remove any settle dust particle, filling the cracks with suitable epoxy grout material and then applying the coating with the help of a roller all as specified and directed by Engineer – in – Charge.

S&F sign board made of retro reflective Type IV high intensity prismatic grade sheeting in any colour and size with signs as per IRC 67-2012 including MS Pipe of suitable dia and height and 4mm aluminium compsoite material grade including required clamps, embedded in above ground level with written name of officers on board and making good surface all as specified and directed.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, 20% glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material all as specified and directed.

Providing and applying 300 mm long with 150 mm long two side arrow mark with 100 mm width 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour (white/yellow) using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, 20% glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material all as specified and directed.

S&F speed bumps breakers made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout all as specified and directed. Make -DA -1008 Dark Eye /3M

S&F fancy design SS garde 304 street LED bollard having minimum weight of 11.30 Kg, diameter of 100mm length of 1.00m at top and bottom diameter of 180mm using 100 mm polycarbonate glass milky white with 12 watts LED module light of philips/fulham driver having adequates number of connectors and one power supply kit as per manufacture requirement and provide bothside hook for fixing chain link necessary provision for fixing on road all as specified and directed by Engr-in-Charge. Note- Item includes connection to main electric supply from near by electric sources.

S&F SS 304 Grade metal letters of height 200mm with PU paint to match the logo colors, mirror polish finish, anti rust including necesssary arrangements to fixing in walls, using scaffolding at any height all as specified and directed.

S&F 4mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

M&L for Stainless Steel grade 304 decorative designer railings, staircase, covers, sitting place, shed (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or checkquerd) & SS plates cutting to desired shape ,1D Finish complete with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with mircro concrete all as directed by Engineer-in-Charge Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.

M&L coloured, digital glossy/Matt outdoor ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/600x300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 all as specified and directed. Make-Johnson/ Kajaria or equivalent)

M&L granite (of any colour) 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 15 mm thick screed bedding in cement mortar 1: 4 and all other similar works all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 of brick work including all quoins, arches, Pillars etc. but excluding ashlar facings built in cement mortar all as specified & as directed.

M&L rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete masonry walls, finished surfaces even and fair without using extra cement and using 2 % water proofing compound all as specified and directed. Notre- WPC shall be measured and paid for separately as 'Supply only'.

Supply only integral water proofing compound.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed

M&L PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in embedding of post all specified & directed.

S&F Steel work in tubular trusses including special shaped washer using ERW or induction butt welded tubes, nuts and bolts, welding, conforming to I. S.1161- 1979 grade St.-240 all as specified and directed. Note -Rate quoted by the contractor shall be demmed to be inclusive of rounding tubular steel.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) fixed complete all as specified & directed

S&F rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality A all as specified & directed .

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. Make:- Crill/Prestar

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, eaves fixed with self tapping screws all as specified and directed.

Rolling and consolidating formation surfaces in cutting with mechincal power roller exc 8 tonne to 12 tonne for compaction all as specified & directed

M&L two coats of synthetic enamel paint over a coat of red oxide on steel surface including preparation of steel surfaces width or girth exc 10cm all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection, finished surfaces even and fair laid in panels including joints filled with sealing compound grade 'A' all as directed by Engr-in-Charge

S&F mild steel work using flat iron as in stays for rainwater, ventilating pipes, rain water half round brackets including bolts if required and similar small articles conforming to Fe410-0 or Fe 310-0 all specified & directed.

S&F rain water gutter in half round shape 110mm dia PVC ( SWR) grade pipes single socketed in any length with integral outlet of 110 mm dia all specified & directed .

S&F PVC (SWR) , 110mm bore pipes, double socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts, bolts of any location, any floor including necessary scaffolding all as specified and directed.

S&F 110mm dia PVC (SWR) bends /elbows of any radius including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed.

Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr depth and getting out in soft/loose soil even in foul condition all as specified and as direcetd.

M&L PCC (1:4:8), type C2 (using 40 mm graded crushed stone aggregate ) as in foundation filling and mass concrete all as specified and directed.

returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick.

M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

M&L for ready mix plaster for external plastering 25 mm thick in two coats of 15 mm base coat and 10 mm finishing coat on brick wall or concrete surfaces and cement mortar with WPC 3% by weight of cement all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all specified & directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface all specified & directed.

M&L coloured digital ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile size 0.36 sqm sqm in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all specified & directed. Make : H R Johnson/ Nitco / Kajaria.

M&L coloured digital cremic tiles 10 mm thick (Square/rectangular), polished, area of each tile size 0.36 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all specified & directed. Make : H R Johnson/ Nitco / Kajaria.

M&L digital coloured glazed ceramic tiles 600x300 x7 /450x300x7 mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed into quoted rates

M&L Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes like tiles all as specified and directed.

S&F steel water tubing, galvanised iron medium grade 20 mm bore (ISI Marked) with all fittings fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building including scafolding all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya

S&F steel water tubing galvanised iron medium grade 15 mm bore (ISI Marked) with all fitting fixed complete to walls and ceilings or laid in floor/wall/ceiling in high rise building including scafolding all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya

S&F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

S&F 2000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm bore ball valve high presure with polythene float and fly nut epoxy coated aluminium rod, tank nipple, screwed for iron pipe or brass ferrule all as specified in SSR Part I

S&F factory made 35 mm thick machine pressed architects veneer designer ply lam both side flush door shutter, solid core construction with block board core incl 5mm thick teakwood lipping alround with centrally locking arrangement with Lock of make Godrej of Link, 7 lever with Door eye, PVC buffer, door stopper and self-closing Device all as specified and as directed by Engr-in-Charge.

S&F factory made single extruded WPC (Wood polymer composite) soilid door frames/chowkhat comprising of 125 x 65 mm size applying PVC solvent cement and screwed with full body threated star headed SS screws having minium frame density of 750 Kg/Cum and resistance to spread of flame of class A category with property of being termite/borer proof water/moisture proof and fire retardant and fixed in position with MS hold unserviceable fast/lugs/ss dash fasteners of required dia nad length complete all as specified and as directed.

S&F 2nd class HW Glazed and skeleton shutters for doors/Window of 35 mm thickness, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer all as specified and directed. .

M&L PCC 1:3:6 type C-1, (using 20 mm graded crushed stone aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork all as specified and directed.

S&F mild steel flat iron as in hold fast clamps and all other similar works conforming to Fe 290. Gde -E-165 all as specified and directed.

M&L for floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 150 mm all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified & directed .

S&F aluminium anodised 100 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 150 mm cast type anodised fixed all as specified & directed

S&F CP bib tab 15mm dia fancy type chromium plated with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed in position all as specified & directed

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed (Length of bolt in 300mm) all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with tinned tack or galvanised wire staples all as specified and directed.

S&F framed work such as grills, gratings with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as directed & specified.

M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works all as specified and directed.

S&F coloured anodized aluminium sections as per relevant IS for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips. However it will not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Joint filling shall be completed using silicon gun.'.

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F 25 mm dia decorative fancy type aluimium curtain rods and all other connected works all as specified and directed.

S&F 25 mm dia decorative fancy type curtain rod brackets all as specified and directed.

M&L point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch all as specified and directed. Note :- Switch, socket and fan regulators to be measured and paid for separately .

All as per serial item No 74 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point)

S&F modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Cona , Plaza, Anchor .

S&F modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

S&F modular sockets 16A/20 Amps 2/3 pin combined 2 module 230/250 Volts, 50 Hz with one no MCB SP 20 Amps, air conddtioner AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona , Plaza, Anchor .

S&F LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

S&F LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all as specified and directed.

S&F MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

S&F MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed.

S&F MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's all as specified and directed.

S&F MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting all as specified and directed. . Note : (i) MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . (ii) Copper thimble shall be used for connection of cable .

S&F MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts all as specified and directed.

Supply lay/spread in trenches, crushed stone sand, clean, including spreading, levelling, punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection all as specified and directed.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes, LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc , of size 10 Sq.mm 2 core , confirming to IS specifications all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I.

SHREE JAGDISH FURNITURE CO.

NATH CONSTRUCTION

Colaba Group Works

David Construction Co.

Unitech Enterprises

Mayur Enterprises

Bidder Name

Unitech Enterprises

Mayur Enterprises

NATH CONSTRUCTION

Colaba Group Works

David Construction Co.

SHREE JAGDISH FURNITURE CO.

M K ENTERPRISES