PROVISION OF RAIN SHED NEAR APS, SPL REP OF TEA ROOM AND TOILET BLOCKS AT HQ 108 MTN BDE AND PROPOSED SCHEME FOR INTERCONNECTION OF LOTUS POND TO RWH TREATMENT PLANT AT BRICHGUNJ MILITARY STATION, PORT BLAIR

Amount

Excavation post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/ dense soil, Returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

Surface dressing not exceeding 15 cm deep and getting out in hard/dense soil complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for taking out or laying of pipes/cable of any size etc. and getting out in hard dense soil complete all as specified and as directed

Excavation over areas n.exc 1.5m deep and getting out in any type of soil complete all as specified and as directed

Excavation over areas exceeding 1.5m deep but not exceeding 3.0m deep and getting out in any type of soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for hard-core of gauge exceeding 63 but n.exc 150mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

Material and labour Hard-core of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

Supply and filling pulverized stone dust to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified and directed. Note: Thickness of stone dust will be paid after cushioning after punning.

Supply only stone Boulders of size exceeding 200mm and n.exc 300mm for filling dry, hand packed tightly, as in wire mesh Gabion boxes all as specified and as directed by Engr-in-Charge. Note:- Wire mesh Gabion Boxes shall be measured and paid separately

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

All as per item No 13 here in before but exc 1.5 n exc 4 sqm each complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:2:4 Type B1 (20mm graded aggregate) for paving, etc complete all as specified and as directed

Material and labour for 100 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in base for floors complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:4:8 D2 (40mm graded aggregate) for paving, sub base path etc complete all as specified and as directed

Material and labour Cement concrete in foundations, filling and mass concrete type D-2 1:4:8 (40mm graded aggregate) complete all as specified and as directed

Material and labour pre-cast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed.

Material and labour Rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed

Material and labour for preparing new steel/iron surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, exceeding 10cm width or girth and applying two coats of anti-corrosive paint over a coat of red oxide primer, complete all as specified and as directed

Material and labour for oil bound distempering two coats including preparation of surfaces old decorated, plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

Material and labour for two coats of cement base paint over newly plastered wall surfaces including preparation complete all as specified and as directed.

Material and labour steel deformed of twisted bars 10mm dia (For Gabion Basket), and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, (for steel crate of size 200 x 100 x 100cm) complete all as specified and as directed

Material and labour for steel work Fe 410 -W (Gde E- 250) quality "A" Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed

Material and labour for steel work Fe 410 -W (Gde E- 250) quality "A" Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed

Supply and fix MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed

Supply and fix pre painted galvalume aluminium zinc coating GI based semi-corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self-tapping screws etc complete all as specified and as directed.

All as per item at sl No.29 here in before but plain sheet as in ridge, eaves board etc.

Material and labour for coloured non-skid ceramic tiles (Joint Free) 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles of size (450 x 300) x 7-8mm thick, on vertical surfaces such as skirting dados and risers to steps etc, over and including 10mm thick rendering in cement plaster 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engineer-in-Charge

Material and labour for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 10mm thick CM (1:3) complete all as specified and as directed

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame complete all as specified and directed by Engineer-in-Charge.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete

Supply and fix Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed

Supply and fix 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed

Supply and fix Butt hinges, Size of hinge 100mm extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and as directed

Supply and fix Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Supply and fix floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fix glass corner shelf, 30cm, with suitable D brackets complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

Supply and fix in repairs stainless steel gratings 125 mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC cabinet mirror of size 450 mm x 600 mm and fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge. Make Prayag

Supply and fix Angular Stop Cock with Wall Flange brass CP 15mm dia bore with cup and washer complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar cat Part No.CON-059KN or equivalent

Supply and fix brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix chromium plated, Brass towel rack with single rail as per Cat No. 1581 of Jaquar, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix hand shower (Health Faucet) 1 meter, with PVC tube with wall hook complete all as specified and as directed by Enineer-in-Charge

Supply and fix in repair brass chromium plated bottle traps 32 mm bore of trap for wash hand basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed omplete all as specified and as directed

Supply and fix long body bib cock with wall flange cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.CON-107KN

Supply and fix rectangular shaped urinal partition made of frosted glass of size 900x 450x 10mm tk finish: chrome fixed to wall complete all as specified and as directed by Engr- In -Charge. Make: Jaquar model No. 1810-US/1810-UC or equivalent

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

Supply and fix Soap Dispenser with Glass bottle complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.AKP-35735P or equivalent

Supply and fix two way bib cock with wall flange, brass CP complete all as specified and as directed by Engineer-in-Charge. Jaquar cat Part No.LYR-38041 or equivalent

Supply and fix vitreous china EWC model CASCADE type of size 640 x 360 x 690 mm in approved colour all as specified and directed as per ISI mark. Make : Jaguar cat Part No. SLS-WHT-6851P or equivalent

Supply and fix vitreous china half stall urinal complete including prividing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around back in cement discharge pipe etc complete all as specified and as directed by Engr- In -Charge.

Supply and fix vitreous China wash hand basin, 'OVAL TYPE' 545x 545x185 mm including with single tap hole fixed in granite including chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32 mm dia of required length and all necessary 450 mm long outlet and inlet PVC connection pipe with PTMT check nuts complete all as specified and as directed. Make: Jaquar cat Part No. FSS-WHT-29601 or equivalent

Material and labour for 75mm inner dia CI pipe (sand cast) in any length with (or) without ear with cement joint fixed to wall as vent pipe complete all as specified and as directed.

Supply and fix 110 mm PVC (SWR ) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix 110mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed

Supply and fix PVC (SWR) 75mm bore piipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

Supply and fix ERW Steel Pipe including specials, nominal dia 100 mm as per IS 3589 (1981) thickness 4.8 mm including fabrication complete all as directed

Supply and laying of CPVC pipes of outer dia 16mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified and as directed

Supply and laying of CPVC pipes of outer dia 20 mm SDR 11 and plain CPVC SDR 11 with all fittings complete all as specified and as directed

Material and labour for 75mm inner dia CI cowls fixed to vent pipe complete all as specified and as directed.

Material and labour for fittings suitable for 110 mm HDPE pipe of any size and shape all as specified and directed by Engineer-in-Charge.

Supply and fix 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed

Supply and fix 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed

Supply and fix CI bend 100mm dia with door access branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed by Engr-in-Charge.

Supply and fix CI bend 75mm dia door access branch piece, 75mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in 100mm dia cast iron sanitary connection- short connections pipe of length upto 300mm complete all as specified and as directed by Engr-in-Charge.

Material and labour for CI foot valve conforming to IS:4038, of size 100mm dia with brass strainer complete all as specified and as directed

Material and labour suction strainer Y type conforming to IS , of size 100mm dia complete all as specified and as directed

Supply and fix Cast Iron Air Valves with two air Outlets, 50 mm dia bore and fixing Up in HDPE water supply mains all as specified and as directed.

Supply and fix PVC suction hose/ pipe green nominal dia 100 mm , ultra light and flexible with PVC spiral ribbed for extra strength complete all as directed

Supply and fix Valve, gate/ globe conforming to IS 9338, 80 mm dia all as specified and as directed.

Supply and fix Valve, gate/ globe conforming to IS 9338,100mm dia pipe all as specified and as directed.

Supply and fixing Reflux valve 100 mm (4.0 inch) dia all as specified and as directed..

Supply and fixing Reflux valve 80 mm dia all as specified and as directed.

Material and labour for cutting the existing DI / ERW 150 mm pipe and insertion of Tee 150 x 150 x 100 mm for connecting 110 mm dia HDPE Pipe complete all as specified and as directed . Note:Rate is inclusive of fitttings and fabrication all as directed.

Supply,fix,install and testing of high speed Monoblock pump set suitable for 415 V, 3 phase , 30M head ,11.1 LPS including foundation as per manufacturer recommendations with and including suitable rated Starter complete all as specified and as directed by Engineer-in- Charge. Make :Kirloskar or equivalent Note:- 1. Rate deemed to be inclusive of fittings like tapper/reducer/bends required to connect suction line to pumpset 2. Rate deemed to be inclusive of GI pipe line of suitable dia (length appr. 6m) including connected fittings like tappers/reducer/bends etc required to taken out connection from delivery side of pumpset.

Laying only High Density Polyethylene(HDPE) pipe of outer bore 110 mm in trenches including socket fussion / mirror jointing complete all as specified and as directed by Engineer-in-Charge. Note : 1.Earth work and PCC for support shall be measured and paid separately 2. Pipe shall be issued under Schedule 'B' Stores

Supply and laying of High Density Polyethylene (HDPE) pipe PE 100,PN 10 of outer bore 90 mm in trenches including jointing & fittings complete all as specified and as directed by Engineer-in-Charge. Note :1.Earth work and PCC for support shall be measured and paid separately 2.Rate deemed to be inclusive of all fittings of any size and shape

Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty including Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall for One light point/Exhaust fan point controlled by one switch complete all as specified and as directed by Engineer-in-Charge

All as per item No 89 here in before but One 3 pin switch socket outlet point 5 amps on independent board

All as per item No 89 here in before but One fan point controlled by one switch and one regulator

All as per item at sl No.89 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge.

Supply and fixing modular fan step regulator 230 V AC 120 w -2 module, complete all as specified and as directed by Engineer-in-Charge Make:-Simon

Supply and fix exhaust fan 300 mm sweep 900 RPM metal body havy duty 230 volts, AC, 50 Hz and 1400 rpm including wall cutting and finising and including 300 mm lover shutter complete all as specified and as directed.

Supply and fix LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.MakePhilips Equivalent in Cormpton/Havells.

Material and labour in repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

Supply and fixing modular switch 1 way 5 A ,1 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing modular socket outlet 2/ 3 pin combied ,6/15 Amps 2 module 230 volts complete all as specified and as dircted by Engineer-in-Charge.]

Supply and fixing modular socket outlet 6 amp 2/ 3 pin combied 2 module 230 volts complete all as specified and as dircted by Engineer-in-Charge.

Supply and fix single pole and netural 240 Volts 6 To 32 amps complete all as specified and as directed by Engineer-in-Charge Make : Havells /Legrand/C&S/L&T

Supply and fix ,MCB, TPN, 16A, 10KA, to be fixed in the existing LT Panel all as directed complete. Note : Rate deemed to be inclusive of any alteration works if required to fix MCB in LT Panel

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge Make : Havells /Legrand/C&S/L&T

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.

Supply and fix LED light fitting 1 x 7 Watt, podwer coated white finish Ultra slim+ 6500k housing round shaped Recess mounted LED slim panel with PMMA diffuser including high efficiency electronic driver complete with LED lamp prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable recess mounted fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. Make Philips Cat part No- 59523 or Havells cat part no-ENDURANEODLR7WLED830S

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. Make : Philips Cat No BN021C LED20S PSU CDL/NW GR or eqvt in make of Bajaj/ Wipro.

Dismantling and taking down ceiling fan 1200 mm sweep and refixing/connecting up including provision of cable from ceiling rose or connector to fan and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Dismantling and taking down & refixing old serviceable exhaust fan and connecting up including provinding of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply and lay cable XLPE Insulated screened ,PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 4 core 10 Sqmm 1100 Volts grade with stranded aluminium conductors all as per IS -7098(Part-1 1977) and Part 2- 1985 in trench / wall / floor as specified by Eng-In-Charge :-

Supply and Lay 40 mm outer dia GI tube (light grade) of ISI Marked as per IS-1239 part-I 2004 galvanised with all fittings and fixed complete to wall and ceilings, on pole or laid in floor or in trenches etc. for protection of under ground cables complete all as specified and directed

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type 1 flat size 250 x 150 x 40 mm laid dry in treches over under ground cables, embossed with "ELECTRIC" on the top surface complete all as specified and as directed

Vandana Enterprises

M/S SHAJAHAN BUILDERS

MST BUILDERS

Gulmarg Electrical Service

Chandra Construction Enterprises

Priya construction

Hindustan Traders

Ravi Enterprises

M/s.Tarun Construction