ADDN/ALTN OF TOILET BLOCK IN BLDG NO.P-165 (A COY) AND P-163 (SP COY) OF 5/11 GR (BOGRA) AND CERATIN MINOR WORKS UNDER AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for backing coat/plaster 10 mm thick on fair faces of brick work surface in CM 1:4 to receive tiles complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for joint free Glazed Ceramic coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Taking up or down steel tubing and connections including removing from site, 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including removing from site, 20 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including removing from site, 25 mm bore of pipe complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings (such as Bend, Tee, Elbow, Union, Socket etc.) and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings (such as Bend, Tee, Elbow, Union, Socket etc.) and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 25 mm bore GI tubes, medium grade galvanised, with all fittings (such as Bend, Tee, Elbow, Union, Socket etc.) and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 2000 litres complete all as specified and as directed.

S&F 2000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F Ball brass valves, high pressure, with of brass with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

Demolition of brick work built in cement or cement lime mortar complete all as specified and as directed.

Brick work with sub-class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

S&F in repair Vitreous China half stall urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including necessary floor trap "P' or 'S' in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair, PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level, white, with inlet ball valves, float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F counter sunk vitreous china wash hand basin of size 550x400x140mm, ivory, including waste fitting complete all as specified and as directed.

S&F in repairs, CP health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and as directed.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F PVC connections 450 mm long with brass unions at both ends suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair 15 mm bore angle stop valves, cast copper alloy, chromium palted, fancy type screwed down high pressure with crutch and butter fly handles, screwed with iron pipes or for union complete all as specified and as directed.

S&F in repair 15 mm bore stop valves (concealed type), cast copper alloy, chromium palted, fancy type screwed down high pressure with crutch and butter fly handles, screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs, mixing valve 15mm bore dia hot & cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to steel pipe complete all as specified and as directed.

S&F in repairs Cast iron floor/Nahani trap with grating including jointing to waste pipe in run lead, dia of outlet 100mm in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends necks etc complete all as specified and as directed.

S&F PVC (SWR) pipes, 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs for CI 100mm bends with door complete all as specified and as directed.

S&F in repairs for CI 100mm single branch piece with door complete all as specified and as directed.

PVC (SWR) Tee any radius, 110mm bore complete all as specified and as directed.

S&F in repairs PVC cowls 100 mm size complete all as specified and as directed.

S&F in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, will ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats for frame with shutters (without taking off shutter from the frame) exceeding 1.50 Sqm but not exc 4 Sqm each complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

S&F 35 mm thick Factory made 2nd class hardwood plain, framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at the site as per specification & drawing complete all as specified and as directed.

S&F stainless steel butt hinges size 100 mm (ISI Marked) complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm (ISI Marked) long of extruded section and fixed complete all as specified and as directed.

S&F aluminium handles, 150 mm size (ISI Marked) Fabricated type complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Powder coated anodised aluminium (minimum thickness of powder coating 50 microns) as in frame & shutter of door, window, ventilators and shutter etc. with one or more rebates including jioning cleat for fixing etc. fixed type/louvered/sliding window or ventilators without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with complete arrangement for securing glass or wire cloth complete all as specified and as directed.

S&F 4 mm thick ordinary quality glass, frosted on one side, in square n. exc. 0.5 Sqm each pane, fixed with aluminium beading in aluminium door/window/ventilator etc complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Engr-in-Charge. Notes for Srl item Nos. 59 & 60 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash complete all as specified and as directed.

Preparation of newly plastered surface of walls and apply three coats of white wash complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings of any descreption and in any position including removal of debrish out of MoD Land complete all as specified and as directed.

M&L for 15 mm thick cement plaster in sunken portion on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. Note : WPC will be paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm incl. cleaning surfaces complete all as specified and as directed.

M&L for cement concrete type E2 1:5:10 (40mm graded crushed stone aggregate) in foundations, mass concrete and filling in sunken floor etc complete all as specified and as directed.

M&L 40 mm thick (average thickness) Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) in patches area exe 3.0 sqm as in flooring/ roof pedding , finished even and smooth without using extra cement, including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C-1, 1:3:6 (using 20 mm graded aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary form work complete all as specified and as directed.

M&L for 50 mm thick (avg) guniting in patches on to the required area on RCC parapets walls, columns, beams, stairs, lintels, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and sand mortar 1:3 (1 cement : 3 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor kp-100 or equivalent grade over reinforcement wherever necessary providing and tying in position with 75mm x 75mm, square size with 2.946mm dia mild steel wire welded mesh over treated surface ready to receive grouts, curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. complete all as specified and as directed.

Notes:- (i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allow to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is to be done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized deale or equivalent. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

Dismentling floors, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for Vitrified Ceramic tiles double charged (light shade), 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles double charged (light shade) 8-9 mm thick (Square/ rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and as directed.

M&L for Form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 nominal mix as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and as directed.

M&L Form work to side of columns and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 (Nominal Mix) as in columns and pillars etc complete all as specified and as directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 (Nominal Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 (Nominal Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requred, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

S&F milt steel TMT bars 8 mm dia, cut to length, bent to shape requred, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and as directed.

M&L for brick work with sub class B old size burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for brick work with sub class B old size burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound of approved quality.

M&L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and as directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and as directed.

M&L for joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frame, three lagged of cross section 90 mm x 45 mm having single rebatd of 32x15 mm to receive shutter of 30 mm thickness, moulded withfire retardant grade unsaturated polyesterresin and chopped mat. Door frame laminateshall be 2mm thick and shall be filled withsuitable wooden block in all over frame. The frameshall be covered with fibre glassfrom all sides including MS stay at the bottom to steady the frame complete all as specified and as directed.

S&F factory made solid FRP door shutter , 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retardantgrade unsaturated polyester resin mouled to 3 mm thick FRP laminated for forming hollow rails and styles iwthwooden frame and suitable blocks of seasoned wood inside at required places forfixing of fittings, cast monolithically with 5 mm thick FRP panels and confirmign to IS 14856-2000 complete all as specified and as directed.

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specifed and as directed.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specifed and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and as directed.

M&L for Steel vantilator with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for preparation of newly steel surface apply two coat of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.

M&L Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and as directed.

S&F Vitreous China urinals, halft stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe complete all as specifed and as directed.

S&F 15 mm bore CP Urinal spreader for urinals complete all as specifed and as directed.

S&F vitreous china wash basin of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specifed and as directed.

S&F waste fittings, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specifed and as directed.

S&F rotational moulded polyethylene water storage tank three layers of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I specification complete all as specifed and as directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and as directed.

S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specifed and as directed.

S&F pillar cock fancy typre cast copper alloy, chromium plated 15mm dia of bore complete all as specifed and as directed.

S&F stop cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and as directed.

S&F 100mm dia cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specifed and as directed.

M&L for providing concrete bed to drain pipe including packing under and hauching against the sudes of pipes after they are laid and tested, in cement concrete 1:3:6 type C1 (Using 20mm graded stone aggregate) complete all as specifed and as directed.

S&F 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls complete all as specifed and as directed.

M&LSalt-glazed stoneware gully traps, square or roun mouthed floor trap, plain with grating including jointing with solvent cement of 100mm dia complete all as specifed and as directed.

S&F CP grating of size 100mm dia complete all as specifed and directed complete all as specifed and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specifed and as directed.

S&F for machine pressed precast concrete interlocking paver block 60 mm thick any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over 50 mm thick sand cushioning complete all as specifed and as directed.

M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including suitable concealed PVC conduit medium grade and sunk in pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer complete with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed. Note :- The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete.

All as per Srl item No.124 above but one light /fan/Bell point/security light controlled by one way switch.

S&F switch piano flush type 5/6 Amp complete one way single pole complete all as specified and as directed.

S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and as directed.

S&F wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type as per sample complete all as specified and as directed.

S&F LED street light fitting 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including fabrication of GI bracket 25mm dia suitable for fixing of Led light fitting duly fixed with clamps, nut, bolts, & washers etc and all as directed complete all as specified and as directed.

M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface all as per site requirement & complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

S&F metal body exhaust fan 300mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and as directed.

S&F MCB DB SPN 4 Way metal body double door, (IP43 Protection) flush mounting epoxy powder control having 200 Amps rated bus bar complete all as specified and as directed.

M&L MCB SPN 'C' curve 40 to 63 Amps 240 Volts , 10 KA complete all as specified and as directed.

M&L MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and as directed.

S&F submain wiring PVC insulated FRLS single core unsheathed, multistrand copper conductor cable of size 2.5 Sqmm in 2 runs and 2.5 Sqmm one run for earth drawing through suitable PVC concealed conduit wall/floor complete all as specified and as directed. Notes :- (a) One run of main cable and one run of earth cable all together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laid in new conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and as directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

Kunal Construction Co.

M/S.M.S.Devi.Const.Co

P R Constructions

M/S GOPAL JEE SINGH