Supply Installation Testing and Commissioning for Shifting of existing 11KV Line along with road near Helipad at GH Hospital on upper feeder by way of replacing existing old 9Mtr Poles on full turnkey basis under SDP 2025 26

Amount

Supply Part

Supply of 9 Mtr. Long Pole,ST-410 SP33)

Supply of GI V cross-arm with top Bracket including clamp as per specification(14.631Kg/complete V-set)

Supply of GI Channel X-arm including clamps and braces for DP (80Kg/DP)

Supply of 50 mm² ACSR Conductor

Supply of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Supply of Galvinized Nuts and Bolts

Supply of Danger Plates with Clamps

Supply of Anti-Climbing Device with Clamps

Supply of Earthing Complete by GI Spiral/Rod 20mm 2.5 mtr long through GI Strip.

Supply of Red Oxide

Supply of Aluminium Paint

Supply of Cement bottoming 1:2:4 mix as per REC standards 0.5cum/pole

11KV GO, AB Switch 3-phase, 3-pole, 200Amp, Vertical Type/Link Set

Channel for DP GOD

Installation, Testing and Commissioning Part(Labour Component)

9 Mtr. Long Pole,ST-410 SP33)

GI V cross-arm with top Bracket including clamp as per specification(14.631Kg/complete V-set)

Supply of GI Channel X-arm including clamps and braces for DP (80Kg/DP)

50 mm² ACSR Conductor

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Galvinized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Spiral/Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards 0.5cum/pole

11KV GO, AB Switch 3-phase, 3-pole, 200Amp, Vertical Type/Link Set

Channel for DP GOD

Dismentalling of 0.03 Conductor and R/B to PDD Store

Dismentalling of existing 9 Mtr ST Pole, cross arms with insulators and R/B of same to PDD Store

M/S JIGMET PHURBU (BID ID -157194)

M/S GYALSON ELECTRONICS (BID ID -157220)