Loading…
Loading…
Tender Value
₹4.6 L
EMD Value
₹13,625
Closing Date
6 Oct 2026, 5:30 pm
Directorate of Municipal Administration
JUNIOR ENGINEER
Repair of Anganavadi building and other development work at Salundi village in Bogadi TP Limit
DMA/2026-27/BD/WORK_INDENT62369
DMA/2026-27/BD/WORK_INDENT62369
Open
Buildings
Electronic Documents, First(One Cover)
DMA Town Panchayat Bogadi
6 documents required · 5 mandatory · 1 optional
₹500
₹13,625
22 Sept 2026
22 Sept 2026
6 Oct 2026
Repair and other development work of Anganavadi at Salundi village in Bogadi TP Limit
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of app...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SR-2023-24, Volume II, Chapter-05, Page No.09, Item No....
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR-2023-24, Volume II, Chapter-05, Page No.09, Item No. 5.4)
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing and laying water proofing treatment to the Water tanks & Liq- uid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931. (SR-2023-24, Volume-II, Chapter-13,Page No.119, Item No.13.12)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE5 star rating and IS:374/19 and also comply with IS:1709/1984 with ...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 percent lumen maintenance with CRI 80 Power Input 220 240V 50 60Hz Power factor 0...
Supplying fixing of retro fit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70 percent efficacy 80 lumen per W life 25000 burning hours and Compliance ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate withr equired nos.of machines crews,bolts nuts etc.,complete on the existing metal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate withr equired nos.of machines crews,bolts nuts etc.,complete on the existing metal...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.10-1...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.6 Wa...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A SP Switch(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.1)
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..6A Three Way 5 Pin Socket(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.3)
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.Electronic stepped regulator.(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.16)
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.16A Three Way 5 Pin Socket(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.12)
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board..16A SP Switch(Elec SR-2023-24, Volume-6, Page No.9, Item No.3.14.10)
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board..6A Bakelite Ceiling Rose(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.5)
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board..6A Pendant Holder(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.6)
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board..32A Bakelite DP(Elec SR-2023-24, Volume-6, Page No.10, Item No.3.14.14)
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick Gl pipe 2.5m long buried in a pit. The pit should...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1 INDENT62369.docx
Tender Document • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .