Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹3.5 CrAccepted-AOC | ₹3.5 Cr | L 1 | Accepted-AOC Lowest One work order issued on 19.12.2025 |
| 2 | L 2₹3.6 CrRejected-AOC | ₹3.6 Cr | L 2 | Rejected-AOC Second Lowest Unsuccessful tenderer EMD amount to be refund |
| 3 | L 3₹3.6 CrRejected-AOC | ₹3.6 Cr | L 3 | Rejected-AOC Third Lowest Unsuccessful tenderer EMD amount to be refund |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
| 5 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Others-Tender Processing fee in the form of Demand Draft not submitted during the time of tender opening |
| Sl No | Description | Qty | Unit | T.M. BUILDERS L1 | SRG CONSTRUCTION L3 | NATARAJAN ANAND L2 |
|---|---|---|---|---|---|---|
| 1.00 | E0001) Earth work excavation for foundation in all soils (including refilling)
a) 0 to 2 mt. | 775.6 | 1 Cum | 250 ₹1.9 L | 200 ₹1.6 L | 236.92 ₹1.8 L |
| 2.00 | E0005) Earth work excavation for Open foundation (excluding refilling)
a) 0 to 2 mt. | 117.4 | 1 Cum | 115 ₹13,501 | 90 ₹10,566 | 118.77 ₹13,943.60 |
| 3.00 | b) 2 to 3 mt. | 12 | 1 Cum | 125 ₹1,500 | 100 ₹1,200 | 122.52 ₹1,470.24 |
| 4.00 | E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m
a) 0 to 2 mt. | 77.8 | 1 Cum | 160 ₹12,448 | 150 ₹11,670 | 167.97 ₹13,068.07 |
| 5.00 | RE0006) Providing Pre-Constructional Antitermite treatment | 499 | 1 Sqm | 30 ₹14,970 | 30 ₹14,970 | 28.78 ₹14,361.22 |
| 6.00 | F0001) Supplying and filling in foundation and basement with filling crushed stone sand | 141.4 | 1 Cum | 1,500 ₹2.1 L | 1,650 ₹2.3 L | 1,582.33 ₹2.2 L |
| 7.00 | F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement | 12 | 1 Cum | 750 ₹9,000 | 1,500 ₹18,000 | 699.21 ₹8,390.52 |
| 8.00 | F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement | 12 | 1 Cum | 850 ₹10,200 | 1,600 ₹19,200 | 767.98 ₹9,215.76 |
| 9.00 | F0026) Filling in foundation and basement and other similar works with Excavated earth | 82.6 | 1 Cum | 36 ₹2,973.60 | 40 ₹3,304 | 38.93 ₹3,215.62 |
| 10.00 | F0013) Supply and filling in foundation and basement with gravel | 579.6 | 1 Cum | 350 ₹2.0 L | 550 ₹3.2 L | 525.78 ₹3.0 L |
Tender Value
₹4.2 Cr
EMD Value
₹2.2 L
Closing Date
3 Oct 2025, 6:00 pmClosed
Superintending Engineer South Circle TNPHC Ltd
Tamil Nadu Police Housing Corporation Limited South Circle No 1 Inspector Quarters TSP VI Battalion Campus New Natham Road Madurai 625014
Construction of New building for Fire and Rescue Services Station with development works at ALANGULAM in Tenkasi District
2025_TNPHC_608332_1
SE/SC No 22/2025-2026-1
Open Tender
Civil Works
335 days
ALANGULAM IN TENKASI DISTRICT
Refer Tender documents
7 documents required · 7 mandatory
₹0
₹2.2 L
23 Dec 2025
24 Sept 2025
6 Oct 2025
24 Sept 2025
3 Oct 2025
24 Sept 2025
Amount
E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.
E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.
b) 2 to 3 mt.
E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.
RE0006) Providing Pre-Constructional Antitermite treatment
F0001) Supplying and filling in foundation and basement with filling crushed stone sand
F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement
F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement
F0026) Filling in foundation and basement and other similar works with Excavated earth
F0013) Supply and filling in foundation and basement with gravel
F0041) Supplying and filling the low lying area with conveyed gravel in the low lying area in layers of 150mm tk
C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly
C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture
C0035) Plain Cement conrete 1:3:6 for foundation using 20mm Gauge HBSJ
CS0037) Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20 I. 20mm thick a) In Ground Floor
b) In First Floor
CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement
b) In Ground Floor
C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade a) In Foundation and Basement
b) In Ground Floor
c) In First Floor
d) In Second Floor
C0013) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete a) Providing Pit
b) Augering 30cm dia
B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement
B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Ground Floor
b) In First Floor
c) In Second Floor
B0054) Brick Partition wall in Cement Mortor 1:4 110mm thick for super structure using fly ash bricks of size (23x11x7cm) with Admixture a) In Foundation and basement
b) In Ground Floor
c) In First Floor
B0062) Brick partition walls in cement mortar 1:4 70mm thick using fly ash bricks of size 23x11x7cm with admixture a) In Ground Floor
b) In First Floor
FL0003) Supplying and fixing of 20mm thick bituminous expansion joint filler pad
FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly
FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture
FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring
FL0025) Weathering Course with concrete broken brick jelly 20mm gauge
FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound
FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture
FL0110) Supplying and laying of Ceramic tiles (anti skid) over Cement mortar 1:3, 20mm thick with Admixture
FL0117) Supplying and fixing of Vetrified tiles of best approved quality (Colour) 600x600x8mm for flooring and other similar works with Admixture
FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture
FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,
b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works
c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.
d) For Vertical wall
g) Double centering Garage area
FW0012) Providing additional Strutting to centering of R.C.C slab of all surfaces
PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture
PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture
PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture
PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC
PL0015) Plastering for border in CM 1:5, 12mm tk a) 150mm wide border
b) 75mm wide border
c) 50mm wide border
PL0017) Stucco Plastering 12mm thick using chips 3-10mm thick
PA0001) White washing three coats using clean shell lime slaked
PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer
PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats
PA0032) Supplying and applying of wall putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls
PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls
PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat
PA0044.a) Painting the ceiling with one coat of approved best ready mixed Plastic emulsion paint including primer
PA0027) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface
J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length
b) Teak wood below 2 m length
J0021) Supply and fixing of best approved superior variety magnetic door catches
J0017) Supplying and fixing of 4mm thick pin headed Glass panels
J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm
JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter
JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators
JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)
JD0002) Supplying and fixing of Teak wood Panelled single leaf door shutters with Aluminium fittings Suitable door of size a) 900mm x 2400mm
b) 750mm x 2400mm
JD0010) Supplying and fixing of Teak wood Panelled Double leaves door shutters with Aluminium fittings Suitable for Door of size a) 1200 x 2400 mm
JD0007) Supplying and fixing of Teak wood Panelled Double leaves door shutters with Brass fittings Suitable for Door of size c) 1800 x 2400 mm
JW0011) Supplying and fixing of best Indian Teak wood double leaf Glazed French window shutters of following size a) French window of size (0.75 x 2.10)
b) French window of size (0.90 x 2.10)
c) French window of size (1.65 x 2.10)
JD0052) Supplying and fixing of Double leaf Solid core flush door shutters Suitable for Door of size a) 1200 x 2400 mm
GR0001) Supplying and fixing Mild Steel grills as per the design approved
GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase (304 L Grade)
RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)
JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood
WS0220) Supplying and fixing of Precast kerb stone of 450x300x150mm made in CC 1:3:6 using 20mm size HBSJ
WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe
SA0073) Supply & fixing of CI Steps (not less then 5 Kg each)
WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia
WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia
WS0004.b) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres
MS0053) Supplying and fixing of C.I man hole cover (Heavy duty) of approved quality and brand of size 0.60mx0.60m (50 Kg)
WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials
b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials
c) 20mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials
WS0238) Drilling of 150mm vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting and inserting the casing pipe in the drilling hole etc., a) Upto 150m depth ending below Ground level
b) From 151m upto 180m depth ending below Ground level
c) From 181m upto 210m depth ending from Ground level
WS0148) Supply and delivery of 150mm dia of PVC casing pipes a) 150mm dia PVC Pipe (Casing Medium Depth)
WS0262) Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours)
WS0207.b) Supply and fixing of 200mm dia PVC end cap suitable for PVC casing pipe for borewell top cover
WS0231) Supplying and fixing of the 150mm dia MS Borewell clamp set
WS0222) Supply and delivery of clear water vertical wet type 3 phase 5 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell
WS0264) Supply and delivery of 2 HP - Openwell Submersible pumpset with ISI mark suitable for 150mm dia borewell Duty - 50 lpm x 50 m
WS0228) Supplying and fixing of 5 HP three phase panel board D.O.L with two level guard and auto start
WS0246.a) Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell
EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable
WS0235) Supply and delivery of required dia nylon rope
SA0122) Supplying, laying and jointing the following dia of UPVC Pipes below Ground Level a) 32mm dia UPVC pipe
b) 50mm dia UPVC Pipe
WS0016) Supply and laying of following dia G.I pipes Below ground level a) 80mm dia GI Pipe
WS0015) Supply and laying of following dia G.I pipes Above ground level a) 20mm dia GI Pipe
b) 50mm dia GI Pipe
c) 80mm dia GI Pipe
EL0609.a) Supplying and fixing of PVC Rigid Pipe 25mm (1") with all conduit accessories suitable for TV Networking and Data cabling arrangements as required
WS0243) Supplying laying and fixing of following dia UPVC Column pipe for borewell b) 40mm dia UPVC Column Pipe
SA0192) Supplying and fixing of following dia UPVC special a) 50mm dia UPVC Elbow
b) 50mm dia UPVC Tee
c) 50mm dia UPVC Coupler
d) 50mm x 40mm dia UPVC Reducer
WS0018) Supply and fixing of following dia GI/GM Specials of best approved quality, with ISI mark a) 50mm dia GI Union
b) 50mm dia GI Bend
c) 20mm dia GI Bend
d) 50mm dia GI Hex Nipple
e) 25mm dia GI Hex Nipple
f) 32mm dia GM Gate valve (Heavy duty)
g) 50mm dia GM Non Return vale
WS0242) Supplying of 40mm dia cast iron adopter
EL0272) Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing
EL0242.a) Supply and fixing of 900x700x250mm tk EB service panel for 415 volt, 3 phase, 4 wire 50 HZ power distribution system
EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable a) 2 core 10 Sqmm PVC aluminium armoured LTUG cable
b) 3.5 core 50 Sqmm PVC aluminium armoured LTUG cable
c) 4 core 10 Sqmm PVC aluminium armoured LTUG cable
EL0338.a) Labour charges for laying of PVC Aluminium Armoured LTUG cable excluding Civil works Below Ground level
EL0341) Labour charges for laying of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level
EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 2 core 10 Sqmm Brass cable gland
b) 4 core 10 Sqmm Brass cable gland
c) 3.5 core 50 Sqmm Brass cable gland
EL0344) Supply and providing cable end termination of following PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 4 core of 10 Sqmm PVC Armoured ALTUG cable end termination
b) 2 core of 10 Sqmm PVC Armoured ALTUG cable end termination
c) 3.5 core of 50 Sqmm PVC Armoured ALTUG cable end termination
EL0264.a) Supply and fixing of 40 Amps Four pole MCB Isolators
EL0145.a) Supply and fixing of 150W LED street light fitting
EL0145) Supply and fixing of 120W LED street light fitting
EL0146) Supply and fixing of 60W LED street light fitting
SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories
SA0013) Supplying and fixing of approved brand Porcelain Flat Back urinal long size
SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,
SA0039) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings
SA0045) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum water seal of 50mm
WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap
SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.
SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)
SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap
SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line
SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe
b) 160 mm dia UPVC Non Pressure pipe
SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend
b) 160mm dia PVC Bend
SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark
WS0126) Supplying and fixing of C.P. shower arm with over head shower rose of best approved quality with ISI mark
SA0186) Supplying and fixing of CP Angle Cock Tap
SA0009) Supplying and fixing of CP Shower valve with Wall Flange
SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements a) 600mm x 600mm
b) 750mm x 750mm
EL0557.a) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA
EL0529) Supplying and fixing of spot light (Master LED 3W-12W) including labour charges for fixing of light
EL0290.a) Supplying and fixing of MS angle of size 50x50x5mm MS angle to hold LTUG cable in duct portion
MS0002) Supplying and fixing of 20mm dia Aluminium Hanger Rod to the required length
MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long
MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand
MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook
MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type
L0001) Supply and planting Avenue Trees
L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard
EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose
b) Light point with bakelite battern type holder
c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.
EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point
EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point
EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself
EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places
EL0041) Supplying and fixing 15 Amps 3 pin plug type wall socket with switch
EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements
EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook
EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator
EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep
EL0085) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI quality
EL0070) Supplying and fixing of 9 watts LED bulb
EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings
EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard
EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements
EL0072) Supplying and fixing of 12 Watts LED Bulb for Bulk head fittings
EL0190) Supply and Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable
EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable
EL0202) Supply and Run off main with 4 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable
EL0203) Supply and Run off main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable
EL0241) Supplying and fixing best country wood meter cupboard
EL0311) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End
EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase
EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level
EL0153) Supplying and fixing of 24W LED 4000K 2X2 square type recessed fitting
NL0001) Supplying Fabrication and Erection in position of M.S. scheme name and layout board
NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering a) 30cm letters (12")
b) 23cm letters (9")
NL0007.a) Supplying and fixing of plastic name board of required size with Stikness cut in computer to the depth cost & fixing charges
NL0005) Supplying and fixing in position of Aluminium dye casting TamilNadu Police round Logo emblem b) 45 cm Round logo (18")
NL0005) Supplying and fixing in position of Aluminium die casting TNPHC Emblem a) 60 cm TNPHCL Emblem (24")
MS0057) Supplying and delivery of following Godrej / Equivalent Navtal Lock b) 7 Levers - 3 Keys Lock
GR0053) Supplying and fixing in position of colour Galvalume sheet of 0.47mm thick inclusive of overlap length
WS0017) Supplying and delivery of following dia GI Pipe 'B' class a) 50mm dia GI Pipe Vertical post
b) 40mm dia GI Pipe
c) 32mm dia GI Pipe
J0050.a) Supplying and fixing of 150mm dia Circular Flange
J0050) Supplying and fixing of bolts and nuts of required size and length
GR0059) Fabrication and fixing in position of roof truss including cost of materials and labour charges etc.,
NATARAJAN ANAND (BID ID -1471260)
SRG CONSTRUCTION (BID ID -1477449)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_727016.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid