Completion of Balance Part of PHC Building at Watakaloo.

Providing and fixing KD wooden glazed shutters for doors, windows and clerestory windows including 4mm thick float glass panes beadings etc including handles tower bolts etc ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (30-35mm thick) all complete.

Providing galvanized and fixing 35 mm thick KD wood wire gauze shutters using M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges and other accessories bright finished of required size with necessary screws as per direction of Engineer-in-charge (complete)

Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws including L drop and handles

Providing and fixing of 4 mm thick glass panes as per specification with beeding up to size 40x20 mm in wooden frames and painting incld all fittings complete job as directed by E.I.C complete

Engagement of Labours for clearance and other things complete as directed by Engineer in Charge

Engagement of a plumber for providing, laying, jointing, testing and commissioning of the internal water supply connection to the building. including connection from the existing water source/main line to the overhead water storage tank, fixing all necessary fittings (labour)

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing water heating geyser 50 litre capacity of approved brand incl all accessories, fittings and fixtures, complete job.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete