Establishment of New Industrial Estate at Metikurke village, Aimangala hobli, Hiriyur Tq, Chitradurga District. (Phase- I) 60.5 acres

Establishment of New Industrial Estate at Metikurke village, Aimangala hobli, Hiriyur Tq, Chitradurga District. (Phase- I) 60.5 acres

Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights...

Construction of Embankment by excavating the available approved Gravel-Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading g...

Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable mater...

Removal of stumps and roots including backfilling with suitable material to required compaction Girth from 300 mm to 600 mm-Ground Leveling Qty-25 each ---- As per standard tender document

Removal of stumps and roots including backfilling with suitable material to required compaction Girth from 600 mm to 900 mm-Ground Leveling Qty-10.00 each ---- As per standard tender document

Boundary pillar - Guard Stone Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC-25 fixed in position including finishing and lettering but excluding painting-Ground L...

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete

surfaces-a.Ground Leveling Qty-318.24 Sqm...

Cable Duct Across the Road Providing and laying of a reinforced cement concrete pipe duct 300 mm dia across the road -new construction- extending from drain to drain in cuts and toe of slope to toe of...

Compacting original ground supporting embankment - Loosening leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment scarified to a depth of ...

Granular Sub-Base - Plant Mix Method Construction of Granular Sub Base of required grading as per design mixing in a mechanical mix plant at OMC carriage of mixed Material to work site spreading in un...

Wet Mix Macadam -Plant mix method- Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mi...

Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS- 383 the size of coarse aggregate not ex...

Pavement Quality Concrete using paver - M40 Grade Construction of M40 grade un-reinforced dowel jointed plain cement concrete pavement over a prepared sub base with Cement at 420 kg-m3 coarse and fine...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads transporting to site spreading grading to required slope and compacted to me...

Precast Cement Concrete Interlocking Blocks - IRC SP 63- 2018 - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63-2018 and IS 15658 for Cycl...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively 250 mm high in M 15 grade foundation 150 mm thick foundation having 50 mm projection beyond kerb stone kerb s...

Providing Speed Breakers-Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99-2018 using Dense Bituminous Mac...

Direction and Place Identification Signs with size more than 0.9 m2 size Board - Providing and erecting direction and place identification retroreflectorised sign as per IRC-67-2022 made of high inten...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works and other parallel works from 0.50 m to ...

Steel Fabrication Supplying fitting and placing TMT FE 550 - 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping-welding joi...

Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works and other parallel works from 0.50m to 3.50 ...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution ligh...

Providing and laying in position Cement Concrete for all Foundation works.The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Providing and laying in Cement Concrete for all Basement and surface level works return walls retaining walls sunken floors etc. The granite-trap- basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height.The granite-trap...

Supplying at site Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comple...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts bolts and washers as requir...

Providing 20 mm cement plaster of mix -1-4 -1 cement- 4 fine sand- to brick-stone masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including...

Finishing walls with Acrylic Smooth exterior paint of required shade -New work -Two coat applied at 1.67L-10 m² over and including priming coat of exterior primer applied at 2.20 kg-10 m²- with pain...

Providing and fixing Steel work in built up tubular -round square or rectangular hollow tubes etc.- trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved s...

Filling available excavated earth -excluding rock- in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ra...

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade -Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and forei...

Providing and laying in position Cement Concrete for all Foundation works. The granite-trap-basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing lath plaster with cement mortar 1-3 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajjafacia backing to cup boa...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top sur...

Providing and laying in Cement Concrete for all Basement and surface level works return walls retaining walls sunken floors etc. The granite-trap- basalt crushed graded coarse aggregates and fine aggr...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1-6 -1 cement - 6 coarse sand- inc...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openin...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC-Matching to RAL-9016- sections and with minimum TiO2-Titanium Dioxide- at 6PHR with TPE-Thermo Plastic Elasto...

Providing and fixing pressed steel door frames conforming to IS- 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges jamb lock jamb bead and if required angle thre...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6 mm angle iron 3 mm M.S. gusset plates at the junctions and corners 25 mm dia pulley 40x40x6 mm ang...

Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1-2-4 -1 cement - 2 coarse sand - 4 graded stone aggregate- finished with a floating coat of nea...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1-4 -1 cement- 4 fine sand- including rounding off corners wherever required smooth rendering providing and removin...

Wall painting with premium acrylic emulsion paint of interior grade having VOC -Volatile Organic Compound - content less than 50 g-L of approved brand and manufacture including applying additional coa...

Applying priming coat- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron- steel works including preparing the surface after thorougly cleaning ...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm -inner dimensions- with modular bricks of CD 75 in cement mortar 1-6 bed concrete 150mm thick with 1-3-6 plasterin...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite-trap-...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications including setting out construction of shoring strutting barricading ca...

Filling approved earth -excluding rock- in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and wa...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Providing and laying Ductile Iron pipes of class conforming to IS 8329-2000 with latest amendments conveying to work site rolling and lowering into trenches laying true to line level and perfect linki...

Providing and laying Ductile Iron pipes of class conforming to IS 8329-2000 with latest amendments conveying to work site rolling and lowering into trenches laying true to line level and perfect linki...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland-Pozzolana cement conical in shape at top with CC 1-3-6 foundation using 40mm and down size graded metal of approved qualit...

Providing and fixing 150mm dia. Cast Iron pipe for ventilatiing shaft 5 M high with specials and cowl and with suitable grips in CC 1-2-4 pillar using 10mm to 20mm graded hard granite with 15 cms. thi...

Refilling available earth around trenches-pipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm -inner dimensions- with modular bricks of CD 75 in cement mortar 1-6 bed concrete 150mm thick with 1-3-6 plasterin...

Earth work in surface excavation by manual means for lowering and levelling the groundby chiselling and wedging in Hard rock for allworks other than foundation and depth not exceeding 100 mm as per dr...

Providing and fixing Structural Steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved s...

Earth work excavation for pipelines-cables by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights remov...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints ...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...

Providing and fixing 3 layer PP-R -Poly Propylene Random Copolymer- pipes confirming to IS.15801- 2008 OR WRAS NSF certificates which is UV stabilized and anti-microbial fusion welded having thermal s...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron -DI- conforming ti IS-1865 with the latest amendments and of grade GGG 40-50 shaft ...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron -DI- conforming ti IS-1865 with the latest amendments and of grade GGG 40-50 shaft ...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron -DI- conforming ti IS-1865 with the latest amendments and of grade GGG 40-50 shaft ...

Providing and fixing of fixed height surface box H-4057 MD-KU with PP 40percentage GF Lid Housing of PAplus Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection va...

Providing GM -copper alloy- wheel valves- check valve confirming to IS 778-1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside screw rising spindle screw...

Providing and fixing electro fusion saddle comply with BS EN12201 -3-2011 PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting ...

Lowering laying true to line and level of PVC Ringtite - PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type with all labour with enc...

Providing and fixing 3 layer PP-R -Poly Propylene Random Copolymer- pipes confirming to IS.15801- 2008 OR WRAS NSF certificates which is UV stabilized and anti-microbial fusion welded having thermal s...

Providing and fixing Chlorinated Polyvinyl Chloride -CPVC- pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of p...

Flow control Valve 5LPM-10LPM-15LPM - Providing and fixing Flow control valve using food grade materials SS 316 ball -1-2 -15mm- including cost of all materials labour charges HOM and testing complete...

Supply and delivery at site wrought middle steel -galvanized- GI union confirming to IS 1239-II 1991 with latest amendments if any. For 20 mm dia GI Union ---- As per standard tender document

Providing and fixing brass stop cock of approved quality - 20 mm nominal bore. ---- As per standard tender document

Providing GM -copper alloy- wheel valves- check valve confirming to IS 778-1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside screw rising spindle screw...

Earth work excavation by manual means for drains canals waste weir draft approach channels key trenches foundation of Buildings and bridges and such simillar works in all kinds of soils as per drawing...

Earth workexcavation by manual means for drains canals waste weir draft approach channels key trenches foundation of Buildings and bridges and such simillar works in all kinds of soils as per drawing ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including cost ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including cost ...

Providing and laying in position Cement Concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works and other parallel works from 0.50m to 3.50 m height. Th...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite-trap-...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms including MS frame made of 50x50x6mm angle shutters made of 3mm thick MS sheets with hinges locking arrangements at top etc. including p...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick 0.23 M width with copper floats indicators and flexible nylone wires painting figures with approved enamel paint...

Providing and fixing DI-CI puddle flanges conforming to IS 7181-1986 with latest ammendments. in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...

Providing and fixing DI-CI puddle flanges conforming to IS 7181-1986 with latest ammendments. in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...

Providing Laying and Jointing Cast Iron -CI- double flanged pipes true to line - hoisting of DI flanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to...

Providing Laying and Jointing Cast Iron -CI- double flanged pipes true to line - hoisting of DI flanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to...

Finishing walls with water proofing cement paint of required shade -New work -Two coats applied at 4.84 kg-10 m²- to give an even shade after thoroughly brooming the surface to remove all dirt dust m...

Food Graded Water Proofing Membrane - Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterpro...

Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm d...

Providing Ductile Iron Push on special confirming to IS 9523-2000 - All Double Socket Duck Foot DI Bends- 100 X 90 ---- As per standard tender document

Providing Ductile Iron Push on special confirming to IS 9523-2000 - All Double Socket Duck Foot DI Bends- 200 X 90 ---- As per standard tender document

Labour charges for laying and jointing of DI pipes of all classes rolling and lowering into trenches laying true to line level and perfect linking at joints and commissioning including loading and unl...

Labour charges for laying and jointing of DI pipes of all classes rolling and lowering into trenches laying true to line level and perfect linking at joints and commissioning including loading and unl...

Providing and laying red oxide flooring 40 mm thick with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1-3 cement mortar mixed with red oxide finished with...

Providing and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1-2-4 vibrated post of 150x150mm at bottom and 100x150mm at top placed at 2 Mtrs. intervals for a height of 75...

Providing and fixing MS ladder between landings 45 cms wide using angle iron of specified sizes 20mm MS bars at 25 cms. centre to centre with necessary supports of same angle iron etc. as directed inc...

Ladder inside the container- Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia. flutal pipe for Rungs at 250mm c-c ladder fixed at an ang...

Supply and fixing of Horizontal Mechanical Woltman type hemetically sealed water meters with copper Glass register with IP 68 protection. The meter shall be removable mechanism type manufactured as IS...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron -DI- conforming ti IS-1865 with the latest amendments and of grade GGG 40-50 shaft ...

Providing Ductile Iron Push on special confirming to IS 9523-2000 - All Double Socket Duck Foot DI Bends- 150 X 90 ---- As per standard tender document

Providing Ductile Iron Push on special confirming to IS 9523-2000 - All D.I. Flanged Socketed D.I. Flanged Spigot MS End Plates D.I. Flanged Socketed 100.00 mm ---- As per standard tender document

Providing Ductile Iron Push on special confirming to IS 9523-2000 - All D.I. Flanged Socketed D.I. Flanged Spigot MS End Plates D.I. Flanged Socketed 200.00 mm ---- As per standard tender document

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints ...

Supply and delivery at site special moulded variety PVC bend as per IS 7834- 1987 and fabricated as per IG124- 1984 with ISI mark with its latest amendments 200 mm dia PVC BEND ---- As per standard te...

Supply and delivery at site special moulded variety PVC tee as per IS 7834- 1987 and fabricated as per IG124- 1984 with ISI mark with its latest amendments 200 mm dia PVC Tee ---- As per standard tend...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 4. Cement Concrete Drain Walls for Percentage on finished rate of concrete per m3 ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of bridge Sl No 6. Box Culverts for Percentage on finished rate of concrete per m3 is 20pe...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 1. a- Foundation upto plinth Isolated for Percentage on finished rate of concrete ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 1. a- Foundation upto plinth Isolated for Percentage on finished rate of concrete ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 9. RCC Columns - Shaft -Slip Centering- for Percentage on finished rate of concret...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 9. RCC Columns - Shaft -Slip Centering- for Percentage on finished rate of concret...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-111 of Sl No 9. RCC Columns - Shaft -Slip Centering- for Percentage on finished rate of concret...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 14. RCC Beams Lintels and Troughs of Aqueducts for Percentage on finished rate of ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 14. RCC Beams Lintels and Troughs of Aqueducts for Percentage on finished rate of ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 11. Earth retaining structures for Percentage on finished rate of concrete per m3 ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 11. Earth retaining structures for Percentage on finished rate of concrete per m3 ...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 19.Chejjas Canopy and Other Architectural projections of minor sections for Percen...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 15. RCC Roof Slabs for Percentage on finished rate of concrete per m3 is 50percent...

Additional for formwork Centering and Scaffolding As per PWD Common SOR Volumen-1 Addendum-I in Page No.-112 of Sl No 20. Curved RCC Roof Slabs Domes and Sloped Roofs for Percentage on finished rate o...

Waste water Treatment by Bio Sewage Treatment Plant -Bio STP- onsite construction -25 KLD-- Providing installation and commissioning of anaerobic Bio Sewage Treatment Plant -Bio STP- for black water w...

Loading and unloading of Polythene Bagged Seedlings- Loading of polythene -agged seedlings into the vehicle at the nursery site and unloading at the site nearest to the planting site -d- Seedlings rai...

Transportation- Transportation of polythene-bagged seedlings in hired truck from the nursery site to planting site -d- Seedlings raised in 8 x 12 size bags -iii- Distance from 21 to 30 Km ---- As per...

Conveyance-Conveyance of polybagged seedlings on head load from the dumping site to planting location near each trench-pits-distance upto 3km- -d- Seedlings raised in 8 x 12 size bags ---- As per stan...

Planting- Planting of P.B. Seedlings after tearing with blade and removing the polythene bags in trenches - pits including scooping the soil to required depth pressing the soil gently around the seedl...

Four-sided wooden-frame Tree-guards with chicken-wire mesh Fabrication of tree guards of 4 poles of2 .5m. length and 12 batons of 40cms length treating with creosote oil completely from bottom to topf...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes collars a...

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting Venner or...

Providing and fixing gun metal non- return valve of approved quality -screwed end- - Horizontal ---- As per standard tender document

Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments electrical resistance welded s...

Providing and fixing MS casing collars as per IS 1239 -part-II- 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall ...

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints ...

Providing supplying to work siteSingle Phase Submersible Pump Sets of 100mm dia -4 inch- suitable for bore well confirming to IS 8034-2000 specificationswith testing of as per instructions of engineer...

Bore Well Electrical- Supplying fully automatic star-delta starter unit push button type with suitable wires 3 contactors one adjustable thermal timer mounted on a common base plate held in ste...

Supplying and drawing 3 core flat sheathead submergible pump cable manufactured with electronic grade copper with flexible copper with low resistance conducter confirming to table 3 class of 5 IS 813...

supplying of 1.1KV LT UG cable having aluminium conductor PVC insulated extruded inner sheathed galvanized steel strip -except 2Cx10 sqmm wire armoured - confirming to IS- 3975 - 1990 - No. of strip...

Labour charges for laying of 1.1KV class UG cable when supplied agency in existing trench GI pipe stone ware pipe -on wall -on pole as required -69-5- in existing trench duct 25 sqmm to 75 sqmm -41-6...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications including setting out construction of shoring strutting barricading caution lights bracing u...

Refilling available earth around trenches-pipelines

cables in layers not exceeding 20 cm in depth

compacting each deposited layer by ramming after

watering with a lead upto 50 m and lift upto 1.5

Supplyingandfixingsinglephasepreventerusingnecessarywiresover an existing panel board suitable for motor upto 20 HP capacities. ---- As per standard tender document

SupplyingfixingandwiringheavydutylowvoltagecapacitorsconformingtoIS2834.3phase400-440Vgradeforpowerfactorimprovement of rotating machineries like induction motor. ---- As per standard tender document

Supplying and fixing of Porcelain fuse channel with cut out one xisting wooden-panel using necessary nuts bolts and washers. ---- As per standard tender document

Providing PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints ...

supply and fixing polished wood board made of not less than 15mm thick plank on both side not more than 2pieces and fixing same to the wall using tapered inverted wooden plugs screws20x20x2.5 -24-5....

Supplying and fixing LT cast Iron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen-insulating compound complete with terminals clamps bolts nuts and washers etc. -42-6.10-...

Bore Well Electrical - Rod type of earthing using 40 mm Dia 3 Mtr long MS rod as ground rod in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and c...

PART-A Tapping Line From Mallapan Halli Substaion To Site Compound Wall

RCC Pole - 9 Mtr Long 145 Kg WL ---- As per standard tender document

PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

11 kV Horizontal Cross Arm with clamps HTST supports bolts nuts and washers for RCC Pole - 9 Mtr Long 145 Kg WL ---- As per standard tender document

11 kV Horizontal Cross Arm with clamps HTST supports bolts nuts and washers for PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

DP Structure with RCC Pole - 9 Mtr Long 145 Kg

WL ---- As per standard tender document

11 kV 5 KN Polymeric Pin Insulator -24 mm Dia FRP Rod- ---- As per standard tender document

70-90 kN Disc Insulator ---- As per standard tender document

Strain Clamp 3 bolt type for Disc Insulator

-Extracted from KPTCL SR Item No. 47.5.7J ---- As per standard tender document

Guy Set Complete with No. 15 Strain Insulator ---- As per standard tender document

Coyote ACSR Conductor

-Ex-tracted from KPTCL SR Item No. 20.6 R Labour Sil No. 4aJ ---- As per standard tender document

PGCampsforCoyoteConducor -ExtacedfomKPTCLSRItemNo.95.5- ---- As per standard tender document

Spiral Earth Electrode ---- As per standard tender document

EG Stirrups with GI wire lacing Set- 2

Nos ---- As per standard tender document

Caution-Danger Board ---- As per standard tender document

Anti Climbing Device -12 Mtr GI Barbed Wire- ---- As per standard tender document

Part A. LABOUR CHARGES

RCC Pole - 9 Mtr Long 145 Kg WL ---- As per standard tender document

PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

11 kV Horizontal Cross Arm with clamps HTST supports bolts nuts and washers for RCC Pole - 9 Mtr Long 145 Kg WL ---- As per standard tender document

11 kV Horizontal Cross Arm with clamps HTST supports bolts nuts and washers for PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

DP Structure with RCC Pole - 9 Mtr Long 145 Kg

WL ---- As per standard tender document

Guy Set Complete with No. 15 Strain Insulator ---- As per standard tender document

Coyote ACSR Conductor

-Ex-tracted from KPTCL SR Item No. 20.6 R Labour Sil No. 4aJ ---- As per standard tender document

Spiral Earth Electrode ---- As per standard tender document

EG Stirrups with GI wire lacing-Set- 2

Nos ---- As per standard tender document

Guy concreting with Boulders Mud and Sand ---- As per standard tender document

Caution-Danger Board ---- As per standard tender document

Anti Climbing Device -12 Mtr GI Barbed Wire- ---- As per standard tender document

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

PART-B Trunkline From Tapping Point To Inside the Layout

11 kV 3x400 Sqmm XLPE UG Cable ---- As per standard tender document

Straight Through Jointing Kits HS Type suitable for 3x400 SqmITl

Cable ---- As per standard tender document

Cable Termination Kit Outdoor HS Type Suitable for 3 4oo s mlTl Cable-per kit ---- As per standard tender document

Cable Termination Kit Indoor HS Type Suitable for 3x400 SqmITl Cable ---- As per standard tender document

Cable Covering Tiles 250x125x40 mm or 125x125x40 mm ---- As per standard tender document

Artificial-Manufacture Sand

-Extracted from Vol-1 PWD 8R SI No. 62- ---- As per standard tender document

RCC Hume Pipe 2000mm Long l50mm Dia ---- As per standard tender document

Collars for RCC Hume Pipe ---- As per standard tender document

GI Pipe 150 mm Dia for drain crossing cable raising etc.

-Extracted Vol-S BWSSB SR Item No. 177- ---- As per standard tender document

Route and Joint indicating stones ---- As per standard tender document

Part B. Labour charges

Cable trench excavation 1000x0.6x1=600 Ordinary soil

-Extracted Vol-1 PWD SR SI No. 1.17.1- ---- As per standard tender document

Laying of cable in trench ---- As per standard tender document

Refilling and consolidation

-Extracted rozn Vol-1 PWD fiR fil No. 1.10- ---- As per standard tender document

Making of straight through joint ---- As per standard tender document

Making of cable termination ---- As per standard tender document

Covering the cable with tile ---- As per standard tender document

Spreading Sand and forming with Sand round the cable ---- As per standard tender document

Laying of RCC Hume pipe ---- As per standard tender document

Laying of GI Pipe ---- As per standard tender document

Laying of Route and Joint indicating stone ---- As per standard tender document

PART-C Running of LT AB Cable Inside the Layout

PSCC Pole - 9 Mtr Long 300 Kg WL ---- As per standard tender document

PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

1.1 kV 3 Phase Aerial Bunched Cable of size 3x95plus lxl6plus lx70 Sqmm ---- As per standard tender document

Three Phase Distribution box for 6 Connections ---- As per standard tender document

Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections ---- As per standard tender document

Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections ---- As per standard tender document

Suspension Clamp Assembly 16 to 70 mm -Excluding pole clamp and Eye Hook - ---- As per standard tender document

Pole clamp for HT-LT AB cable ---- As per standard tender document

Eye Hook -Flat type- for fixing Clamps ---- As per standard tender document

Dead End Clamp-Anchor Clamp Assembly 25 to 95 Sq mm -excluding pole clamps and Eye hook- ---- As per standard tender document

Universal Hook Bolts and nuts ---- As per standard tender document

T-connector KZ3 95 ---- As per standard tender document

Cable Straight thruinch joints suitable for 95 Sqmm LT ABC ---- As per standard tender document

Pre-Insulated lug - CPTAU for 95 Sqmm ---- As per standard tender document

End cap for 50-70 Sqmm ---- As per standard tender document

Guy Set Complete with No. 8 Strain Insulator ---- As per standard tender document

PVC Insulated wire 25 Sqmm ---- As per standard tender document

Spiral Earth Electrode ---- As per standard tender document

Part C - Labour Charges

SCC Pole - 9 Mtr Long 300 Kg WL ---- As per standard tender document

PSCC Pole - 9 Mtr Long 200 Kg WL ---- As per standard tender document

1.1 kV 3 Phase Aerial Bunched Cable of size 3x95plus lxl6plus lx70 Sqmm ---- As per standard tender document

Three Phase Distribution box for 6 Connections ---- As per standard tender document

Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections ---- As per standard tender document

Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections ---- As per standard tender document

Suspension Clamp Assembly 16 to 70 mm -Excluding pole clamp and Eye Hook - ---- As per standard tender document

Pole clamp for HT-LT AB cable ---- As per standard tender document

Dead End Clamp-Anchor Clamp Assembly 25 to 95 Sq mm -excluding pole clamps and Eye hook- ---- As per standard tender document

Universal Hook Bolts and nuts ---- As per standard tender document

T-connector KZ3 95 ---- As per standard tender document

Cable Straight thruinch joints suitable for 95 Sqmm LT ABC ---- As per standard tender document

Pre-Insulated lug - CPTAU for 95 Sqmm ---- As per standard tender document

End cap for 50-70 Sqmm ---- As per standard tender document

Guy Set Complete with No. 8 Strain Insulator ---- As per standard tender document

Guy concreting with Boulders Mud and Sand ---- As per standard tender document

Spiral Earth Electrode ---- As per standard tender document

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

Concreting with Material and Labour -The rate of Rs. 6243-m3 for Cement Concrete Mix 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates is extracted from Item No. 2.1.6 of KPWD SR 2...

PART-D - RMU Installation

5 Way RMU 2OD plus 3VL -One Incomer plus Three Breakers plus One Outgoing- ---- As per standard tender document

Bed Concreting with CC 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates

-Extracted from Item No. 2. 1.6 of KPWD

SR 2023-24 Volume - 1- ---- As per standard tender document

Foundation with CC 1-2-4 -M-15- Using 20mm Nominal size graded crushed coarse aggregates -E-u-tracted from Item No. 2. 1.6 of KPWD SR 2023-24 Volume - 1- ---- As per standard tender document

Providing Reinforecement TMT Fe 550- 550D

-Extracted from SL No. 69 of KPWD SR 2023-24 Volume - 1- ---- As per standard tender document

Supplying of Frame of MS Channel 100x5O mm and MS angle 40x40x5 mm welding etc. complete.

-Ezztracted from SP No. g9 of XPWD SR 2023-24 Volume - 1- ---- As per standard tender document

Rod type earthing with 40 mm Dia 3 Mtr long MS rod as per specification and drawing including digging of pit and fixing ---- As per standard tender document

Lettering the RMU with enamel paint and also writing single line diagram of each panel caution Board Danger Board etc. including cost of Paint Brush etc. ---- As per standard tender document

Part D - Labour Charges

Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr ---- As per standard tender document

Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding fixing in concrete aligning the RMU on foundation bed assembly of units connecting Bus ...

PART-E - Transformer Center Material

Spun pole 11 Mtr Long ---- As per standard tender document

Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63- 100-250- 500 kVA -UG Cable- MS ---- As per standard tender docu...

HT Single Top Support with bolts nuts and washers ---- As per standard tender document

11 kV 5 KN Polymeric Pin Insulator -24 inch Dinch FRP Rod- ---- As per standard tender document

Rabbit ACSR Conductor for jumps ---- As per standard tender document

Alkathene Tube 19 mm Dia and in coils of 30 Mtr ---- As per standard tender document

GI Wire 10 SWG ---- As per standard tender document

Guy Wire 7J 10 SWG ---- As per standard tender document

GI Pipe 100 mm Dia for Cable raising etc.

-Extracted from Vol-5 BW8SB SR Item No.

177J ---- As per standard tender document

PVC Pipe 160 mm Dia

-Extracted froxzt Vol-5 BWSSB SR Item No. 649- ---- As per standard tender document

PVC Pipe 25 mm Dia

-Extracted from Vol-6 PWD Ele SR Item to. 2- ---- As per standard tender document

11 kV- 433V 250 kVA 3 Phase 50 Cys Distribution Transformer BEE - 5 Star Rated with oil ---- As per standard tender document

11 kV Solid Core Type HG Fuse Unit-Set-3 nos ---- As per standard tender document

11 kV 200 Amps Single Break GOS ---- As per standard tender document

Earthing materials pipe type for grounding -Single Electrode with accessories- ---- As per standard tender document

al LT Distribution Box for 250 kVA with MCCB ---- As per standard tender document

i- Al Lead Wire - 240 Sqmm ---- As per standard tender document

ii- Heavy Duty Long Barrel Copper Lug 2 inch 0 Sqmm ---- As per standard tender document

iii- PG Clamp - Rabbit to 240 Sqmm ---- As per standard tender document

iv- Spacers for DTC Wiring ---- As per standard tender document

v- Fish Plate with necessary Clamps bolts nuts etc complete -Galvanised- ---- As per standard tender document

c- LT Metering box with CTs and necessary wiring for housing ETV Meter -Please see CDS - 39- ---- As per standard tender document

d- LT Electronic Tri-Vector Meter S Amps - 0.5- 1.0 Accuracy Class ---- As per standard tender document

11 kV Lightning Arrester Metal Oxide 10 kV 5 kA Polymetic Type with ground disconnector-Set- 3Nos ---- As per standard tender document

PVC Insulation Tape in rolls of 10 Mtr ---- As per standard tender document

MS Fish plate ---- As per standard tender document

Caution- Danger Board ---- As per standard tender document

Anti Climbing Device -12 Mtr GI Barbed Wire- ---- As per standard tender document

Granular Aggregates4 20mm downsize ---- As per standard tender document

Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts and nuts the free ends shall be welded to the Pole and block pipe at top a...

LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM-GPRS Modem -as per technical specification- upto 100 kVA ...

Transformer Center Labour

Spun pole 11 Mtr Long ---- As per standard tender document

Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63- 100-250- 500 kVA -UG Cable- MS ---- As per standard tender docu...

HT Single Top Support with bolts nuts and washers ---- As per standard tender document

Concreting materials For 11 Mtzs Gpun Pole Base concreting 1-2-4 1000x1000x150 mm ---- As per standard tender document

Concreting materials For 11 Mtzs Gpun Pole Pole concreting 1-2-4 1000x1000x2500 mm ---- As per standard tender document

Concreting materials For 11 Mtzs Gpun Pole Coping 1-2-4 -as per actuals- ---- As per standard tender document

GI Pipe 100 mm Dia for Cable raising etc.

-Extracted from Vol-5 BW8SB SR Item No.

177J ---- As per standard tender document

11 kV- 433V 250 kVA 3 Phase 50 Cys Distribution Transformer BEE - 5 Star Rated with oil ---- As per standard tender document

11 kV Solid Core Type HG Fuse Unit-Set-3

Nos ---- As per standard tender document

11 kV 200 Amps Single Break GOS ---- As per standard tender document

Earthing materials pipe type for grounding -Single Electrode with accessories- ---- As per standard tender document

al LT Distribution Box for 250 kVA with MCCB ---- As per standard tender document

Labour for TC Grounding ---- As per standard tender document

c- LT Metering box with CTs and necessary wiring for housing ETV Meter -Please see CDS - 39- ---- As per standard tender document

d- LT Electronic Tri-Vector Meter S Amps - 0.5- 1.0 Accuracy Class ---- As per standard tender document

11 kV Lightning Arrester Metal Oxide 10 kV 5 kA Polymetic Type with ground disconnector-Set- 3Nos ---- As per standard tender document

Caution- Danger Board ---- As per standard tender document

Anti Climbing Device -12 Mtr GI Barbed Wire- ---- As per standard tender document

Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts and nuts the free ends shall be welded to the Pole and block pipe at top a...

LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM-GPRS Modem -as per technical specification- upto 100 kVA ...

22.09 Prefabricated Platform for erection of 250 kVA Transformer on 11 Mtr Spun Pole Structure involving Rectangular hollow Sections 96x48x4.87 Thk and 66x3x4.5 Thk Circular hollow section of 165.6 OD...

PART-F - Cable from RMU To Transformer

11 kV 3x95 Sqmm XLPE UG Cable ---- As per standard tender document

Straight Through Jointing Kits HS Type suitable for 95 Sqmm Cable ---- As per standard tender document

Cable Termination Kit Outdoor HS Type Suitable for 95 Sqmm Cable ---- As per standard tender document

Cable Termination Kit Indoor HS Type Suitable for 95 Sqmm Cable ---- As per standard tender document

Cable covering tiles 250x125x40 mm or 125x125x40 mm ---- As per standard tender document

Artificial-Manufacture Sand

-Extracted from Vol-1 PWD SR Sl No. 62- ---- As per standard tender document

RCC Hume Pipe 2000 mm Long 150 mm Dia ---- As per standard tender document

Collars for RCC Hume Pipe ---- As per standard tender document

GI Pipe 100 mm Dia for drain crossing cable raising etc.

-Extracted from Vol-5 BWSSB SR Item No. 177- ---- As per standard tender document

Route and Joint Indicating Stones ---- As per standard tender document

Labour charges-Cable trench excavation 1000x0.6x1=600 Ordinary soil

-Extracted from Vol-1 PWD SR Sl No. 1.17.1- ---- As per standard tender document

Laying of cable in trench ---- As per standard tender document

Refilling and consolidation

-Extracted from Vol-1 PWD SR Sl No. 1.10- ---- As per standard tender document

Making of straight through joint ---- As per standard tender document

Making of cable termination ---- As per standard tender document

Covering the cable with tile ---- As per standard tender document

Spreading Sand and forming with Sand round the cable ---- As per standard tender document

Laying of RCC Hume pipe ---- As per standard tender document

Laying of GI Pipe ---- As per standard tender document

Laying of Route and Joint indicating stone ---- As per standard tender document

PART G -STREET LIGHTING

Providing LED Street lighting system 120 Watts ---- As per standard tender document

Supplying and Fixing mm dia clampsss AGI pipe bracket upto 2.7meters long terminated with are ducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing V-SV-MH-FTL street light ...

Automatic External Switch ON-OFF for Street Light ---- As per standard tender document

SMC Street Lighting Metering Box with Automatic Control Swith Contactors with Single Phase 5-30

Amps meter ---- As per standard tender document

1.1 kV Class HR -Heat Resistant- PVC Insulated and Sheathed Aluminium Single Core Lead wires as per IS-694- 2010 PVC Wire - 4 SqmmWeight per 100 Mtr Coil- 2.4 Kg ---- As per standard tender document

Providing LED Street lighting system 120 Watts ---- As per standard tender document

SMC Street Lighting Metering Box with Automatic Control Swith Contactors with Single Phase 5-30

Amps meter ---- As per standard tender document