Repair and renovation of room no 107 and 213 of old DDE building at New Campus

Amount

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows & ventilators including providing and fixing hinges/pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket 5mm glass panes/12mm teak board laminated on both sides, hydraulic door machine where ever required complete job as required. The Spacing of Vertical members not to exceed 4'-0" & section to be used is 104 mm x 44.45 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered surface to prepare the surface even and smooth complete.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall/ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture. All work upto floor V level.

Repairing of Grit plaster by way of applying/filling of joints by neat cement slurry including cost of material, scaffolding upto floor V level etc. complete.

Painting with synthetic enamal paint of approved brand and manufacture of required colour to give and even shade (one or more coat on old work).

Providing and laying Double charged vitrified floor tiles 60cm x 60cm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Make RAK/Kajaria/Johnson)

Providing & fixing ISI marked flush door shutters non decorative type, core block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters -35mm thick including ISI marked powder coated MS butt hinges with necessary screws, including applying a priming coat of wood primer and then two or more coats of synthetic enamel paint of approved brand and manufacture.

KRANTI LAL KHAJURIA