Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC CB 1 MAHAVEER NAGAR BARMER 344001 RAJ | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹50.0 L+₹4.5 L (9.90%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹52.1 L+₹6.6 L (14.5%)Rejected-Finance S O KALA RAM C O LALIT AND BROTHERS UTARLAI UTTARLAI VPO UTTARLAI BARMER RAJASTHAN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹57.0 L+₹11.5 L (25.4%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹48.5 L
EMD Value
₹97,200
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer (Raj) 344001
ADDITION/ALTERATION IMPROVEMENT TO L/IN ACCN (OFFICERS) AT AF STN UTARLAI
2023_MES_607466_1
8411/E8
Open Tender
Civil Works
Item Rate
180 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Utarlai
₹97,200
Yes
18 Oct 2023
30 Jun 2023
31 Jul 2023
1 Jul 2023
28 Jul 2023
14 Jul 2023
Amount
Taking down cement plaster on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc and including removal for debris and rubbish from the site complete all as specified and directed.
M&L Rendering 15 mm thick on PCC block masonry surfaces in CM (1:6) and finish the surface even and smooth without using extra cement complete.
M&L Rendering 15 mm thick on PCC block masonry surfaces in CM (1:4) using water proofing compound mixing with cement @ 500 gm per 50kg bag of cement and finish the surface even and smooth without using extra cement complete.
M&L for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.
Supply only integral water proofing compound
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L preparation of old decorated surface (plastered or un-plastered surface) by brooming down or steel wire brushing, scraping etc and applying two coats of white wash on ceiling all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over over a coat of pink primer on newly surface of wooden , description over 10 cm girth or width not otherwise described including preparation of surface complete
M&L for finishing the surface including preparation of newly plastered surfaces of walls and applying two or more coats to achieve even shande and colour of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer including 3mm thick wall care putty complete all as specified and directed. Make : Apcolite of asian paint, ICI super clean of Dulux or equivalent
M&L for complete removal of existing treatment and finishing the old surface of walls with applying two or more coats to achieve even shande and colour of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface over a coat of primer including 3mm thick wall care putty complete all as specified and directed. Make : Apcolite of asian paint, ICI super clean of Dulux or equivalent
M&L for finishing the surface of wall including preparation of newly plastered surfaces of walls and applying two or more coats to achieve even shande and colour of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces . complete all as specified and directed. make : Apex ultima of asian paints or equivalent
M&L For complete removal of existing treatment and finishing the surface of wall including preparation of old plastered surfaces of walls and applying two more coats to achieve even shande and colour of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces . complete all as specified and directed. make : Apex ultima of asian paints or equivalent all as speccified.
M&L for applying two coat of white wash on undecorated or new plastered surface of wall including preparation of surface complete all as specified.
M&L for complete removal of existing treatment and applying two coat of white wash on walls old surface including preparation of surface complete all as specified.
Chipping of slab/ columns/ beams/ chajjas/ parapet/ roof projection/ balcony/ staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP
Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge.
M&L RCC M-25 (20mm graded aggr) as in chajjas, downward facia, roof projection, parapet wall and the like complete all as specified and directed.
M & L for form work for flat fair finish to chullah hoods, chajjas, downward facia , parapet , roof projection troughs, facia and similar items including edges.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.
M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.
M&L driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with CICO RESIFIX-G @ 300gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : reinforcement shall be paid and mesurered separately) Make: CICO RESIFIX-G or equivalent in Fosroc/Dr Fixit/STP.
M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of CICO-Latex SBR or equivalent in Fosroc/Dr Fixit/STP as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. MAKE: CICO LATEX SBR or equivalent in Fosroc/Dr Fixit/krishna conchem/STP.
M & L for applying injection grouting through the nozzles. Drilling the holes of 12mm dia upto 100mm deep and fixing of nozzel of 10mm with using CICO NO.3 hardner chemicals. Inject the polymer based cement grout CICO NSPGC grout with cement to RCC wall/ceilling in adequate pressure and seal the nozzel complete as per manufacturer instruction. Item rates are inclusive of all labour, chemicals, supervision, tools and tackles and transportation etc. Required cement would be extra or charged extra, complete as per specification and as directed. . Make : CICO No. 3 NSPGC grount hardner or equivalent in Dr Fixit/Fosroc/STP.
Supply Only cement ordinary portlant or PPC in bags for item No. 24
M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/parapet /roof projection/balcony/staircase with PMM-CICO Repocem PM or equivalent in Fosroc/Dr Fixit/STP including all necessary scaffolding, man and material complete all as specified and directed by Engineer-In-Charge.
Taking down steel windows / steel ventilators / doors with frames etc n.exc 1.5 sqm each with shutter (without taking off shutters from the frames).
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames).
Taking down shutters of any descriotion exc 1.00 Sqm but n exc 2 Sqm each complete.
Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.
Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.
All as per Sl item 32 above but of size 75 X 60 mm as in cupboard frames.
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S/F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer complete as specified and directed
S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.
S&F factory made flush shutter 25 mm thick, solid core construction, with block board core and 0.9mm thick mica decarative lamination type 1 on both sides complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails
S & F framed work as in doors or gates or coolar stand of angle or other section with gusset plates, rails, braces, etc, comlete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165.
S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.
S & F 100mm size mild steel butt hinges medium weight cold rolled mild steel 100mm long.
S & F 75mm size mild steel butt hinges medium weight cold rolled
S&F extruded aluminium alloy handles fabricated types, anodised, each 150 mm long
S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150 mm long
S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size
S&F in repair Aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size
S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size
S&F in repairs aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size
S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length and 12mm dia with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections
S&F in repairs extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections
S&F 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S/F Aluminium hasp and staple 100 mm size complete all as specified and directed
S/F in repairs Aluminium hasp and staple 100 mm size complete all as specified and directed
S&F magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.
Supply & Fix in repair floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed
S & F aluminium door strip with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge.
S&F in repair fixed type powder coated aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick frosted glass and top shutter openable shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick frosted sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium ventilator frame section 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified.
S&F in repair fixed type powder coated aluminium window with provision of glass shutter openable shall be provided with 2 nos aluminum 75mm long hinge with 5mm thick tinted sheet glass2 Nos tower bolt 100mm long , anodised aluminium grill DG104 design with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium frame section of window 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified.
S&F in repair three track aluminum powder coated sliding window with three sliding shutter at upper portion and lower portion shall be fixed glazed and openable glazed shutter for window AC provision , the size of outer frame three track 9 0x 30x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency/ tinted glass of poly carbone including all-around suitable rubber gasket and tracking arrangement each sliding window shall be provided with one number locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and 0.36mm dia stainless steel wire cloth and average aperture 1.4mm all necessary fittings complete all as specified and directed.
S&F three track aluminum powder coated sliding window with three sliding shutter , the size of outer frame three track 90 x 30x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency / tinted glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.
Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection all as specified.
M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts including making good to the disturbed portion complete all as specified and directed.
M & L for applying roof treatment on top of roof with 3 mm minimum thickness APP modified membrane (weighing 3 Kgs/persqm) with non-woven polyster reinforcement/mat(centre core) with thermal insulation laid by rorch application method with overlap 100 on length and 100 mm on the width side as per manufacture's instructions over a coat of approved cold applied butuminous oil based primer (IS-3384) @ 250gm/sqm till surface is fully impregnated. All joints and changes in direction should be cured with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured before laying membrane. complete all as specified and directed by engineer-in-charge.
M & L for rendering 10 mm thick in cement mortar 1:3 with WPC by weight of cement @ 500 gm per 50kg bag of cement on roof surface finished even and smooth (without using extra cement) complete all as specified. NOTE : Water Proofing Compound shall be measured and paid separetely.
Supply only water proofing compound
M & L for Wire brushing and cleaning top surface of tiles at roof slab, lime terracing or cement concrete, including flashings and junction of parapets, etc.,
M & L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges
M & L rendering 15 mm thick in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound by weight of cement @ 500 gm per 50kg bag of cement and for water proof surface of sunken floor complete all as specified
M & L for laying of 45 gsm thick glass fibre reinforced mesh of size 2mm x 2mm , sanwiched between 1st and 2nd coat of Pidifine 2K coating for surface of sunken etc complete all as directed.
M & L for applying water proofing coating in 2 layers with Dr fixit 2 component 112 Pidifin 2 K . the gap between 1st and 2nd layer minimum 6-8 hrs for surface of sunken etc complete all as directed.
Demolition of PCC & pavings n exc 15 cm thickness (below or above ground level) (unreinforced)
M&L for PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as specified and directed by Engineer-in-charge
S & F 40mm dia UPVC pipe with pressure 10kg/sqcm laying in trenches or fixed to wall complete
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary GI clamps etc complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends any radius including laid in trenches and fixed with PVC adhessive complete
S&F PVC SWR floor trap, suitable for 110 mm dia of outlet pipe , with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).
Demolition of block masonry masonry/PCC block masonry/stone masonry built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L PCC Block masonry with solid block exc 10cm in width in PCC 1:3:6 type C-1 using 20mm graded stone aggregate and setting in CM 1:6 complete all as specified.
M&L PCC Block masonry with solid block n.exc 10cm in width in PCC 1:3:6 type C-1 using 20mm graded stone aggregate and setting in CM 1:4 complete all as specified.
Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes / gully trap/ grease trap tank slab) etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid separately).
Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line, cable trenches or for manholes etc not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft/loose soil or hard/dense soil complete all as specified and directed
Removal of excavated material exc 250 m but not exc 500 m and deposited where directed at a level not exc 1.5 m high from starting point Complete all as specified and directed
Material & Labour for 150 mm bore (internal dia) SGSW, laid on concrete bed to required slope in trenches and jointed complete all as specified (Excavation , Earth work and Concrete bed shall be measured and paid separately) and directed by Engr-in-charge.
Material & Labour PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in bed of reinforced concrete pipe 150 mm bore including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed .(Excavation & Earth work shall be measured and paid separately) and directed by Engr-in-charge.
M & L for Cutting into existing manholes for connecting new drains with inserting 150mm dia pipe , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
Material & labour for providing cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate as in coping, surface channels of manholes/ drains, cills,hold fast , backfill of PS chowkhats, benching for manhole and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and directed
Taking up or down steel tubing 15 mm dia including connections and fittings for refixing or removal complete all as specified and directed.
Taking up or down steel tubing 20 mm dia including connections and fittings for refixing or removal complete all as specified and directed.
Taking up or down steel tubing 25 mm dia including connections and fittings for refixing or removal complete all as specified and directed.
S&F for galvanised steel tubing 15 mm dia (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls etc complete all as specified and directed
All as per item No 97 above but 20 mm dia
All as per item No 97 above but 25 mm dia
Relaying/refixing of old steel tubing 20 mm dia including connections in new or old position including cleaning, necessary cutting, threading with necessary fittings like tees, elbows, sockets, reducers, bends etc compete all as specified and directed.
All as per item No 100 above but 25 mm dia bore
Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth
S&F in repairs vitreous china wash down water closet pedestal pattern (EWC) incl necessary fixing arrangements complete all as specified.
S & F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern for IWC, EWC and anlo-Indian water closet complete all specified
S & F in repairs 10 ltr capacity PVC syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets.
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste coupling of chromium plated, PVC waste pipe etc complete all as specifed and directed.
S&F in repairs 15mm dia brass chromium plated (fancy type) stop valve / angle valve , with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed.
S&F in repair 600mm long PVC Connection fixing to 15mm dia iron pipe complete
Dismantling 100 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed by Engr In Charge.
Dismantling 75 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed by Engr In Charge.
S&F 75 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.
S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed.
S&F in repairs cast iron floor trap, 75 mm dia of outlet, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).
All as per item No. 113 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.
S&F in repairs 100 mm CI connection socket/TEE/Elbo to fit out let of WC
S&F in repairs 75 mm dia CI bends/elbo with oval access door etc
M & L for Salt-glazed stoneware gully traps, square mouthed, type 'P' of size 150mm x 150mm with 150mm dia outlet pipe including setted & jointing the pipe with CM 1:1 as iyn5 repairs complete all as specified and directed.
S & in repair 75mm bore Cast iron ,T, socket, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches
S&F in repairs branch pieces single 'T' or elbow 100 mm bore equal or unequal with oval access door
S&F in repair grating dome 125/150 mm dia of stainless steel with or without hole complete
S&F in repair 15 mm dia bib tap, fancy type, cast copper alloy,Fancy type, Chromium plated ,screwed down for iron pipe or for brass ferrule all as directed.
S&F in repairs Chromium plated shower rose 125 mm dia with 125mm long CP arms, with or without swivel joints, including fixing complete to steel pipe or union complete all as specified and directed.
Dismantaling of water tanks capacity exc 250 ltr & n.exc 500 ltr and removing to store
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges as in repairs
S&F Chromium Plated toilet paper holder fixed on wall with PVC washers and dash fastners complete .
S&F in repair CP Health faucet of standared quality and make with high denesity chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.
M&L for applying two coats of Roff Hydamp dampness proof coating with minimun interval 6-8 hrs between both coat of Pidilite or equivalent in Asian paints / fosroc incl applying applying two or more coats to achieve even shande and colour of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new surface or complete removal existing treatment and applied over old surface over a coat of primer on surface of wall complete all as specified.
S&F straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.
S&F CP towel ring of approved make all as specified and directed.
S&F 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.
S&F 15mm dia CP wall mixer/ WHB mixer, chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar
S&F 15mm dia wall mixer, chromium plated with telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar
M&L for 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F bath PVC cabinet mirror of size 350x450 mm Make- Prayag / commander / Polytuf/ shakti
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including skirting complete all as specified and directed
M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm/450 x 350 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/ Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
Material & Labour for vitrified ceramic Dark shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms ) Make : prayag/polytuf/Shakti
Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.
S & F in repairs CI cowls for 100mm bore cost iron pipe all as specified.
M & L for machine cut kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and incl 15 mm screed bed in CM 1:4 including final finish the surface with beeswax polish treating all as directed
M & L for Kota stone slab 20-25mm thick over 10mm thick rendering in CM 1:4 in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete
Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar
S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm all as specified.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F Providing and fixing Gypsum Board 08 mm thick PVC laminated with pvc film both side in ceiling fixed with screw as per manufacturers instructions complete all as specified
S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 25 mm dia all as directed.
M&L for providing weld mesh size 100x100x3mm weld mesh fixing with shear connectors with 8mm dia reinforcement by drilling 75mm deep anchoring holes and filled with two component polyester resin anchoring grout (Two pack system consist of one part of resin and two part hardner) epoxy resin 200gm per hole with CICO RESIFIX-G or equivalent in Fosroc/ Dr Fixit/Sika/ACC/STP as per manufacturers instructions including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Make: CICO RESIFIX-G of CICO or equivalent in Fosroc/Dr Fixit/STP. (Note : The work shall be carried out through approved company authorised applicator and upto 9.0M height)
S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.
M & L for PCC 1:4:8 type D-2 (40 mm graded stoneaggregate) 100 mm thick & finishing the cement conrete surface without using extra cement all as directed.
M&L for PCC (1:2:4) type B-1, 50 mm thick finished even and fair.
M&L for PCC (1:2:4) type B-0, 25 mm thick as in floors/ base finished even and fair.
M & L for Cutting holes in stone masonry wall exc 11 cm but n.exc 23 cm in depth in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified
M & L for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in sunsheds, chajjas , fixed with self tapping screws as specified
M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed .
Taking down u/s perished point wiring for light/fan /socket/power with all fittings and fixtures, tube lights complete including making good the disturbed surfaces complete all as specified and as directed.
M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded FRLS flexible copper conductor cable in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer fixed flushed to the wall with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting chases in brick/ block/stone masonry wall , replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sunken boxes and making good to wall, floors etc
All as per Item No 161 above but for one ceiling fan/exhaust fan point controlled by one switch complete all as specified and directed.
All as per Item No 161 above but for one 5 Amps socket point controlled by switch on the same board with other switches complete all as specified and directed.
All as per Item No 161 above but for one 5 Amps socket point on independent board.
All as per Item No 161 above but for one bell point controlled by one bell push.
Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with pressed steel terminal boxes of adequate size fixed flushed to the wall with 3mm thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, including cutting chases in brick wall, replastering and making good to match the existing specificationscomplete all as specified. Note: a) Unit rate include for cutting chases for conduits and sunken boxes and making good to wall, floors etc.
S&f switch 5 Amps piano flush type single pole one way complete all as specified and directed.
S&f Bell push, flush type single pole one way, 5 Amps, 240 Volts AC complete all as specified and directed.
S&f switch socket combination flush type 5 Amps, 2/3 pin multipurpose complete all as specified and directed.
S&f switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose complete all as specified and directed.
S&F socket outlet flush type 2/3 pin 5 Amps complete all as specified and directed.
S&f ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed.
S&f stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc as required complete all as specified and directed.
S&f electronic door bell ding dong, AC 230 volts, single pole complete all as specified and directed.
S&f lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F in replacement LED bulb of capacity 9 watts complete with all accessories base (ISI marked) all as specified & directed by Engr-in-Charge.
S&f LED tube light fitting 1x20W, 230V, including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&f LED tube light fitting 1x10W, 230V, including LED (tube rod), 2 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Taking down unserviceable submain wiring with any size aluminium cable from existing concealed conduit/surface conduit/PVC casing caping including MS conduit/PVC conduit/PVC casing caping and making good the disturbed surfaces complete all as specified and directed.
S&F in Replacement of sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (multistranded) having nominal area 4.0 Sqmm drawn through existing conduit concealed type and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor drawn through existing PVC conduit, including cutting chases in brick wall wherever necessary, replastering and making good to match the existing specifications including taking down old submain wiring complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.0 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead will be measured as a one unit.
Taking down unserviceable main switch/DB/MCBs incl disconnecting from mains and making good the disturbed surfaces complete all as specified and directed.
LED street light 20 W IP 65, with aluminium pressure die cast housing, toughened glass in the front with complete with all accessories internally pre-wired complete.
M&L in replacement bracket for street light fitting made out of 25 mm bore pipe light grade GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed.
S&F sheet metal enclosures single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double fixed on flush to the wall including making the hole in the wall and fixing the DB including cement works and plastering complete all as specified and directed.
S&f sheet metal enclosures for fixing MCBs TPN 6 way, 415 Volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as specified and directed.
S&f MCBs TPN, 240 volts 63 Amps, 10 KA complete all as specified and directed.
S&f MCBs single pole and neutral, 240 Volts 6 to 32 Amps, 10 KA complete all as specified and directed.
S&f MCB single pole, 240 volts 6 to 30 Amps capacity, 10 KA complete all as specified and directed.
Earthing complete with 600x600x6mm thick GI earth plate electrode buried directly in ground not less than 2.25mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL connected to GI earth lead of 4mm dia by means of nuts, bolts, washers, checknuts etc made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work excavation, PCC chamber, watering pipe, funnel, wiremesh, RCC chamber cover etc complete all as specified and directed. in EP No 3 of SSR Part-I.
S&f exhaust fans AC single phase 230/240 V of size 230mm sweep, 1400 RPM double ball bearings heavy duty motor with louvers etc with mounting accessories like fastener grouting to wall, including electrical connection upto ceiling rose, cutting through stone masonry wall for providing opening suitable for the exhaust fan, finishing the disturbed surface making good with PCC 1:2:4 and cement mortar 1:4 etc complete all as specified and directed.
Supply, laying & testing cable in repair of LT XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed.
Excavating in trenches n. exc 1.5m wide and n exc 1.5 mtr in depth for laying cables/pipe line etc and getting out in any type of soil complete all as specified and directed.
Returning, filling in including spreading levelling watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed.
Removing excavated materials to a distance n.exc 50mtr and depositing where directed at a level nexc 1.5mtr above the starting point complete all as specified and directed.
Providing tibba sand in trenches as sand cushioning to U/G cable including punning down of sand inlayer complete all as specified and directed.
M&l for 40 to 50 mm thick rough dressed Jodhpur type stone slab cover 25 to 30cm wide and 40 to 50 cm in length laid dry abutting each other complete all as specified and directed.
Cutting of existing road/PCC n.exc 20cm wide and n.exc 30cm in depth for laying protecting pipe line etc and removing the debris n.exc 50m and filling with PCC 1:2:4 over the protection pipe complete all as specified and directed.
Supply and lay GI pipe 50mm dia, light grade ISI mark with all fittings laid in trenches, fixing in wall and pole including suitable GI clamps for bracing the pipe with pole for cable protection complete all as specified and as directed.
Taking down ceiling fan, dismantling blades and should be kept safe custody in store complete all as specified and directed.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Taking down carefully serviceable energy meter and remove to store and should be kept in safe custody complete all as specified and directed.
Fixing only and connecting electric meters upto 25 amps as before complete all as specified and directed.
Taking down carefully serviceable geyser and remove to store and should be kept in safe custody complete all as specified and directed.
Fixing only and connecting geyser as before complete all as specified and directed.
Single pole and neutral metal enclosure with a two pin and socket complete with space for one SPN MCB 240 volts complete all as directed by Engr-in-Charge.
AMBEY MAA CONSTRUCTION COMPANY
Lalit and Brothers
M/s Malinath Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .