PROVN OF STN STORES AND ADDN/ALTN OF BATHROOM ANDOH SHED AT MAIN GATE, EXTERNAL PATHWAY FLOOR AND GARAGES AT MD ACCN AT ASHOK VIHAR AND PROVN OF HARD STANDING NEAR SUPPLY MORH AND LT PANELS, DB BOXES A/W ELECTRICAL FITTING TO BLDG NO P-11 UNDER GE

Amount

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, wells, cesspits, manholes, laying of pipe/ cables etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr from the starting point, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc., complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for RCC (Design Mix) of Grade M-25 as in beams, cantilevers, bressummers, lintels over 1.5 mtr clear span, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

Supply only integral water proofing compound.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars, shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, staging for water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.

S&F steel rolling shutters 1.25mm thick, lathes without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as directed complete, push pull or manual type, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new decorated surfaces of wall and applying two coats of oil emulsion paint over and including a coat of 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.

S&F factory made steel windows (box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, fixed at site, complete all as shown on drawingn (as provided by EIC) and directed.

S&F factory made steel windows (box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, fixed at site, complete all as shown on drawingn (as provided by EIC) and directed.

M&L for 4mm thick non asbestos AC building boards, fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws, complete all as specified and directed.

S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of thickness 0.50mm of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall and fixed with self tapping screws, complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet of thickness 0.50mm of an colour, having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges, hips, valley gutters etc. and fixed with self tapping screws, complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 18-20mm thick, as in flooring, steps, skirtings etc. over and including 20mm thick screed bed or bedding ayer in CM 1:4, alid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, leveling course, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as filling in the pressed steel door frame/ hold fast/ back in chowkats, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller of capacity 5 to 8 tonne, complete all as specified and directed.

M&L for 150mm thick (consolidated thickness) solling with using broken boulders or quarried stone interstices filled, surface formed, rolled and consolidated to required gradient and chamber, complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in sub of floors, complete all as specified and directed.

M&L for forming 12mm thick expansion joints in 100mm thick concrete slab, filled with preformed bituminous filler and top 30mm primer and sealed with sealing compound Grade ‘A’, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames), area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, fixed in opening at site, complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame, made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom raid on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site, complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, fixed with screws, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, complete all as specified and directed.

S&F aluminium anodised handles, cast type, 100mm long, complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and making good disturbed surface to match with existing surface, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging and also fastening and fixing complete angle as in cup boards (40x40x5mm), conforming to FE-410-W Gde-E-250 Quality -A, complete all as specified and directed.

S&F factory made 2nd class hard wood, 35mm thick, flush door shutters, solid core with particle board exterior grade as per IS-22002 of 1983 (Part-I). Flush door shutters shall be internally lipped as per clause 8.21 of SSR-1919 Part-I. Flush shutter solid panel construction with both commercial type plywood face on both sides, complete all as specified and directed.

M&L for 18/19mm thick PVC board, one side decorated laminated of approved colour and other side balancing white in colour, cut to size as required and fixed in position for cabinets and similar work etc, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed, complete all as specified and directed.

S&F 150mm size helical double action door spring, mild steel with steel wire spring, stove enameled, black, complete all as specified and directed.

S&F 75mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.

S&F 250mm long aluminum alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, complete all as specified and directed.

S&F continuous piano hinges, 30mm width of flap, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S&F 150mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint, complete all as specified and directed.

Demolition of concrete of any description and in any position, not otherwise specifically provided, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc., laid and fixed the tiles with adhesive chemical of thickness 6 to 8mm, set and jointed in neat cement slurry and pointed in white or coloured to match the shade of tiles, complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 400mm x 300mm x 6-7mm thick, fixed on wall or verticle surfaces over and including 10mm thick plaster/ backing coat in CM 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

S&F PVC connection of size 15mm with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in replacement 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in replacement brass chromium plated shower rose of 125mm size with arm and with or without swivel joints to steel pipe or union, complete all as specified and directed.

S&F in replacement 15mm bore stop valve (concealed type), fancy type, chromium plated with long shank and cup, complete all as specified and directed.

S&F in replacement brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F stainless steel soap dish of size 160mm x 160mm x 90mm, fixed to plugs on wall with chromium plated brass screws, complete all as specified and directed.

S&F in replacement 15mm bore bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F brass CP mixer (wash hand basin), for mixing hot & cold water, screwed down for 15mm bore iron pipe with wall flange, complete all as specified and directed.

S&F wall mixture, non telephonic shower arrangement with connecting legs and wall flange, complete all as specified and directed.

S&F sink mixture with regular swinging spout (wall mounted) with connecting legs and wall flanges, complete all as specified and directed. Make :- Jaguar Cat Part No. LYR-38309 or equivalent make as listed in list of makes.

S&F stainless steel plate racks of size 750mm x 900mm x 250mm and thickness of SS strip of 1.0mm, fixed on wall to SS screws or SS/ brass fastners of suitable size, complete all as specified and directed.

S&F in replacement sink with drainage board, made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including 32mm dia waste fittings of brass chromium plated with PVC waste pipe, complete all as specified and directed.

S&F mirror cabinet of PTMT of size 450mm x 600mm with magnetic looking arrangements, fixed with and including chromium plated brass screws and PVC rawl plugs, complete all as specified and directed.

Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.

S&F replacement cast iron floor trap with SS grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

S&F in replacement 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement vitreous china wash down water closet (pedestal pattern), snow white, suitable for P or S trap complete including connection to drain pipe and to flushing pipe antisyphonage pipe etc., complete all as specified and directed.

S&F in replacement plastic water closet seat cover, white colour, closet pattern with flat bottom and cover and including mild steel chromium plated or aluminum hinges device, complete all as specified and directed. Make :- CERA Cat Part No. B1510121 / Jaquar Cat Part No. CNS-WHT-WCS 1 or equivalent make as listed in list of makes.

S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.

S&F corner glass shelf (as approved by GE), complete all as specified and directed.

S&F in replacement wash hand basin of size 550mm x 400mm vitreous china white, flat back including brackets, brass chromium plated waste coupling and PVC waste pipe of 32mm dia, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4, mixed with and including WPC as per manufacturer's instructions in two layer (10mm+5mm) as in patches on smooth face of brick work or concrete surfaces, finishd the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering CM in 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 250 ltrs but not exc 500 ltrs, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.

S&F ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore iron pipe (Minimum weight 210 Gms), complete all as specified and directed.

M&L for preparation of surfaces and applying three coat of white wash on newly plastered surface of ceiling, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior wheather coat emulsion paint over and including a coat of 1mm thick wall care putty, complete all as specified and directed.

M&L for modular kitchen cabinet, made of 12mm thick both side pre-laminated board with and including SS handles, SS telescopic channels, SS brackets, SS hinges, SS basket and necessary fittings and nuts (size of cabinet (1.8m x 0.6m x 0.7m), complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and leveled in layers not exc. 15cm thick, watered and well rammed to a true surface, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in kerb stones and in similar works, bedded and jointed in CM 1:6 including necessary formwork, complete all as specified and directed.

M&L for chequred cement concrete tile (Dura Stone) of size 25cm x 25cm x 25mm thick, set, jointed and pointed with mixture of white and grey cement in equal proportion and no pigment as in floors, complete all as specified and directed.

Dismantling CGI/ AC/ any others sheet of any description including ridges, complete all as specified and directed.

S&F 2mm fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washers as in roofs, walls, fixed with fixed with L type or J type or cranked hook and bolts or with self tapping screws, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings, complete all as specified and directed.

M&L for mild steel work for vehicle sheds, framed, brackets of angles, tees or channels with web and flanges, cut to shape, drilled and countersunk for screw including bending and welding angles as necessary, gusset plates, riveting, etc., conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade, stranded copper conductor cable, single core 1.5 Sqmm for one light / fan point, controlled by one way switch and wire to be drawn in and including rigid PVC concealed conduit of dia not less than 20mm of 2mm wall thickness, complete with all accessories including GI annealed metal box 1.2mm thick switch board of suitable size, fixed as flush wall with 3mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed and providing earth continuity wire using PVC insulated, un-sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm, complete all as specified and directed.

All as per Srl item No. 105.00 here-in-above but for one 5 Amps socket outlet on independent board, complete all as specified and directed.

All as per Srl item No. 105.00 here-in-above but wire of size 2 x 2.5 Sqmm and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm to controlled the 3 pin 5/15 Amps socket outlet on independent board, complete all as specified and directed.

All as per Srl item No. 105.00 here-in-above but for 3 pin 5 Amps socket outlet on same board with other switches, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 5 Amps, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 15 Amps, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5/15 Amps, flush type, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet as required, complete all as specified and directed.

S&F slim linear LED lighting fixture 18 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 Sqmm copper conductor multi-standard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed.

S&F building security (street type) light fitting 35 Watt, new generation, energy saving and environmental friendly, long life versatile pressure, die cost aluminium IP-66 with acylic powder coated, pressure die cast aluminium compact high power LED light with heat resistant toughed glass, corrosion resistant, isolated driver including provision of GI tubing bracket of suitable size and fixed on wall including MS clamps of suitable size and nut, bolts & washer for fixing, complete all as specified and directed.

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 Star rated with brushless direct current motor (BLDC), complete all as specified and directed.

S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply double door SPN DB system 8 ways, complete all as specified and directed.

S&F MCB 40 to 63 Amp, SPN, 'C' series, 240 Volts, 50 Hz, 10 KA and other domestic loads including all terminals, fitting etc, complete all as specified and directed.

S&F MCB, SP, 6-32 Amps, 'B' Curve, complete all as specified and directed.

M&L for XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core, lain in trenches/ floor or fixed with pole or passing through GI pipe complete including cutting of bituminous road/ chasing to any surface and making good to the disturbed surface to match the existing, complete all as specified and directed.

M&L for dry river sand as cushioning to underground cable provided with a layer of sand of 8cm thick before laying cable and15cm thick after laying cable and stretching the cable, complete all as specified and directed.

Supply and laying brick, sub class ‘B’, old size, well burnt as covering as mechanical protection to cable, complete all as specified and directed.

M&L for 40mm bore GI tubing, light grade with all fitting and fixed to walls/ poles or laid in floors, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead by means of bolts nuts and washers of GI and including earthing pit charcoal, common salt, GI 4mm dia lead wire with 20mm GI medium grade watering pipe and 15mm bore light grade protection pipe upto 5 mtr length with wire mesh and funnel, PCC pit in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), angle iron frame and RCC cover and earth work, complete all as shown in electrical plate No.3 of SSR -2009 (Part-1) and directed.

Taking down carefully point wiring copper/ aluminium (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendent regulators, sockets etc and removing materials to store for keeping of safe custody or credit to contractor and making good the disturbed surfaces to match with existing surfaces, complete all as specified and directed. Note :- Fittings shall be measured and paid separately under respective items of BOQ.

M&L for point wring for one light point / fan point/ bell point, controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit of 20mm dia medium duty, ISI marked including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS, connected to common earth dooly complete including cutting, chasing the surface and then making good the same to match with existing surfaces, complete all as specified and directed.

All as per Srl item No. 127.00 here-in-above but for one 3/5 pin socket outlet, 5 Amp on independent board, complete all as specified and directed.

All as per Srl item No. 127.00 here-in-above but for one socket outlet 3 Pin, 5 Amps, SP on same board, complete all as specified and directed.

S&F in replacement modular switch single pole, one way, 10 Amps, 1 module, complete all as specified and directed.

S&F in replacement modular switch, single pole, one way, 16 Amps, 1 module, complete all as specified and directed.

S&F in replacement modular socket 6 Amp, 2/3 Pin combined, 2 module, complete all as specified and directed.

S&F in replacement modular bell push, 6 Amps, 1 module, complete all as specified and directed.

S&F in replacement modular socket, 6 /16 Amps, 2/3 pin, flush type, complete all as specified and directed.

S&F in replacement modular electronic fan regulator, step type, two module, 60 watt, 230 volt and making all necessary connections, complete all as specified and directed.

S&F in relacement bell, ding dong type, AC, 230 Volts, single pole, complete all as specified and directed.

S&F in replacement socket outlet, two in one, 3/5 Pin, piano type, 5 Amp flush type, complete all as specified and directed. Make :- Anchor Penta Ordering Code : 14119 / Havells REO Cat No: AHEKSWW063 or equivalent make as listed in list of makes.

S&F LED light fitting PLUTO NEO PANEL 2' X 2' PLR 36 Watt LED 857S environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong / grid / ceiling, complete all as specified and directed.

S&F in replacement slim linear LED lighting fixture 20 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed. Make :- Havells Cat Part No. LHEXBYPNIN1W020 or equavalent make in CG / Syska Cat Part No. SSK-SQ2001 RA 1801

S&F in replacement E-Lite LED Curve lighting fixture 10/12 Watt LED batten with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed. Make :- Havells Cat Part No. LHEXBYPNIN1W010 / Syska Cat Part No SSK-SQ1201or equivalent model in Bajaj/ Philips/ Surya/ CG.

S&F in replacement E-Lite LED Curve lighting fixture 05 Watt LED batten with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 Sqmm copper conductor multistandard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed. Make :- Havells Cat Part No. LHEXBYPNIN1W005 / Syska Cat Part No. SSK-SQ0401 or equivalent model in Bajaj/ Philips/ Surya/ CG.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistandard of size 10 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 10.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistandard of size 6.0 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed.

S&F in replacement submain wiring with copper conductor cable (2 runs of cable) multistandard of size 4.0 Sqmm PVC FRLS with all insulated unsheathed in and including PVC concealed conduit of 25mm dia, medium grade and including fittings and 1 Run X 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire, connected to common earth and earth dolly, complete all as specified and directed.

S&F sub main wiring with two run single core 2.5 Sqmm FRLS copper conductor cable PVC insulated 1100 Volts grade including PVC casing & capping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board complete including taking down unserviceable sub main of any type and size and testing on completion, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick, buried in ground vertically to a depth not less than 2.25 meters below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15cm of earth plate and upto 15cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following :- (a) Test point GI wire 4mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tighted on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits). (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

S&F in replacement DB box MCB protected socket with sheet metal enclosure complete with MCBs SP of capacity 25 Amps, complete all as specified and directed.

S&F 4mm dia GI wire as earth continuity conductor or main earth strip, fixed to wall on batten or recess or chess or buried in ground or any other indicated situation for loop earthing etc, complete all as specified and directed.

S&F SPN sheet steel powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system, 12 ways, complete all as specified and directed. Make :- Legrand (Ekinox3) Cat Part No. 507612 Ekinoxe / Schneider (Acti-9) / Siemens(Betagard-8GB 32).

S&F SPN sheet steel powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system, 4 ways, complete all as specified and directed. Make :- C&S Cat Part No. CSDBSPNDD08 / Standard Cat Part No. DSDNSHODXW08 / Indo Asian Cat Part No. 810321.

S&F 'C' series SPN MCB, 5 to 32 Amps, 240 V, 50 Hz, 10 KA lighting and other domestic loads including all terminals, fitting etc, complete all as specified and directed. Make :- Legrand (DX-3) Cat Part No. 408637, 408639 / Schneider (Acti-9) / Siemens (Betagard- 5SL4).

S&F 'C' series SPN MCB, 40 to 100 Amps, 240 V, 50 Hz, 10 KA lighting and other domestic loads including all terminals, fitting etc, complete all as specified and directed. Make :- Legrand (DX-3) Cat Part No. 408637, 408639 / Schneider (Acti-9) / Siemens (Betagard- 5SL4).

S&F 'C' series SP MCB, 06 to 32 Amps, 240 V, 50 Hz, 10 KA suitable for lighting and other domestic loads including all terminals, fitting etc, complete all as specified and directed. Make :- Legrand (DX-3) Cat Part No.- 408587, 90, 92, 93, 94, 95 / Schneider (Acti-9) / Siemens (Betagard- 5SL4).

S&F sheet metal TPN DBs - DPX3 160 MCCB DBs 04 way (DPX3 160+ 12) with metal door 415 Volts grade IP-43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs, complete all as specified and directed.

S&F DPX3 thermal magnetic MCCB 4 Pole 100 Amps, 415 Volts, 16 KA including making necessary arrangements, complete all as specified and directed. Make :- Legrand Cat Part No. 4200 05 or equivalent make in Shnieder/ Seimens

Taking down ceiling fan, cealing cable end etc. and shifting to store complete and re-hanging the same after overhauling and painting with white synthetic enamel paint (two coats) with the help of spray machine and connecting with three core flexible copper conductor cable 0.75 Sqmm, complete all as specified and directed.

S&F rigid non metallic PVC conduit medium grade, 25mm dia inclusive of all fittings such as tees, bends, elbow, reducers, junction box with modular sheet cover, bell mouth tube ends etc. and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc. including cutting and chasing and making good surface as original by plastering and white wash/ colour/ distemper etc, complete all as specified and directed.

S&F electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW of capacity 25 litres, BEE 5 Star rated, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and directed.

S&F round/ square shape 15 Watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F round/ square shape 12 Watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F LED light fitting 9/10 Watt, bulkhead liminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F exhaust fan, steel body, AC, single phase, 230 Volts of size 300mm sweep with blades and frame and louver, complete all as specified and directed.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surface, complete all as specified and directed.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surface, complete all as specified and directed.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, laid in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surface, complete all as specified and directed.

Supply, installation, testing and commissioning of cubical housing 'KIOSK' type LT panel board (Approved by CPRI), outdoor, factory made, totally enclosed dust and vermin proof, openable from both, front and rear side and made out of 3.15mm thick CRCA sheet with angle iron frame of angle size 50mm x 50mm x 6mm having treated with MSR solution for anti corrosive treatment and apply spray paint with two coats of synthetic enameled paint over coat of red oxide primer, rear hinged doors shutters with godrej patten lock with 2 Nos keys, earthing strips at rear side, bottom detachable glande plate complete witch suitable size zink plated and passive nuts, bolts, spring and washers. The cabinet and all members chemically treated as MSR solution for anti corrosive treatment and apply spray paint with two coat of synthetic enameled paint over a coat of red oxide primer. The panel suitable for 415 volts, 50 Hz, three phase, 4 wire system and internal connection should be provided with copper bus bars of suitable size and mounted on PCC 1:2:4 type B-1 including necessary foundation works and legs panel shell be fixed 40cm below and 40cm above from PCC platform, complete as specified and directed with and including the following and panel comprising the following as given below :-

Notes :- An amount of Rs. 42,570.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

s l sharma and sons

takashdeep traders