Construction Of Integrated Cold Chain Plant Unit And Erection Of 500 MT Onion Storage

Amount

Construction of Integrated Cold Chain Plant Unit

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (LIFT UPTO 1.5M.) By Mechanical Means

ExcavationforfoundationinHardmurumincluding removingtheexcavatedmaterialuptoadistanceof50 metresbeyondthebuildingareaandstackingandspreading as directed, dewatering, preparing the bed for thefoundationandnecessarybackfilling,ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Providing dry trap/ granite/ quartzite/ gneiss rubblestone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec.No. : Bd.A.12 Page No. 264 ;

Filling in plinth and floors with approved excavated materialin15cm.to20cm.layersincludingwatering and compacting etc. complete.

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.

Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer)

Providing and layingCastinsitu/ReadyMixcement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided, finishingifrequiredandcuringcomplete,withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrumTypemixer/concreteBatch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)

ProvidingandlayinginsitucementconcreteofM-25 grade of trap / granite/quartzite/gneiss metal for R.C.C. work likeraft,grillages,strips,foundationsand footingsofR.C.C.columnsandsteelstanchionsincluding bailing-out water manually, including centeringformworkofplywood/steel,compaction, coveringnewly laidconcreteby gunny bag, plasticor tarpaulin,finishingtheformedsurfacewithcement morter1:3ofsufficientminimumthicknesstogivea smooth and even surface or rougheningif special finish is to be provided and curing etc complete. (Excluding reinforcement)Thecementmortar1:3plasteris consideredforrenderingunevenandhoneycombed surfaceonly.(Woodenplanks/shutteringwillnotbe allowed) Spec.No.:Bd.F.2 Page No. 298 /IS 456 (1978)

ProvidingandlayingCastinsitu/ReadyMixcement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing orasdirectedincludingsteelcentering,formwork,cover blocks,laying/pumping,compactionfinishingthe formedsurfaceswithcementmortar1:3ofsufficient minimum thickness to give a smooth and even surfaceorrougheningifspecialfinishistobeprovidedand curingetc.complete,(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concreteBatchmixplant(Panmixer)etc.complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

ProvidingandlayingCastinsitu/ReadyMixcement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawingsorasdirectedincludingsteelcentering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finishis to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessorbasedPLCwithSCADAenabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

ProvidingandfixinginpositionTMT-FE-500bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase,newels,chajjas,lintelspardis,copings,fins, archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, bindingwithwiresortackweldingandsupportingas required complete.

Providing dry rubble stone pitching 23cm (about 9) thick including all material, quarry spalls, labour etc.complete.

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external wallsincluding bailing outwatermanually,strikingjointsonunexposedfaces ,watering and scaffolding completeBd. G. 1, Page No.313

Providingsandfacedplasterexternallyincementmortar using approved screened sand, in all positions including basecoatof15mm thickincementmortar1:4using waterproofing compound at 1 kg per cement bag curing thesamefornotlessthan2daysandkeepingthe surface of the base coat rough to receive the sand faced treatment6to8mmthickincementmortar1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surfaceby brushing and brooming down etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.

Providingandfixingrollingshutterfabricatedfrom steell at hsofminimum thickness 0.9mm with lock plate of3.15mmthicknessreinforcedwith35x35x5mmangle sectionfittedwithslidingboltsandhandlesforboth sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastarr angements, M.S.Bracket plate 300x300x3.15mm minimumsizeandshapewithsquarebar,suspension shaft of minimum 32mm diameter, hood cover of M.S. sheetnotlessthan0.9mmthicknessandofanysize attopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade castir on or mild steel and one coatofredleadprimeretc.complete.(I.S.62481979) (Without mechanical gear)

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumenetc. complete.

Providing,fabricatinganderectingat siteofworkthe tubular steel structure (shed) as per standard design and specificationshavingvarious spansin betweentrusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubulartrusses,tubularcolumnspurlins,tierunners, foundationbolts,baseplates,nutsandbolts,welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oilpaintingofapprovedqualityandshadeetc.complete. Spec. Number : As directed by Engineer-in-charge.

Providing and fixing colour coatedZincalume (R) AZ 150(min150gms/sq.mt.totaloneachside)profiled sheets for roofing. The feed materialis manufactured out ofnominal0.45mmBaseMetalThickness(BMT)(0.5mmTCT),Hi-strengthsteelwithmin.550MPa yield strength, metallic hot dip coated with Aluminium- Zincalloy(55%aluminium43.4%zinc1.6%silicon) withCOLORBOND(R)steelqualitysuperdurable polyester paint coat (with in organic pigment). The paint shallhaveatotalcoatingthicknessofnominal35um, comprisingofnominal25umexteriorcoatontop surface and nominal 10um reverse coat on back surface. Profilesheetshallhavenom.950-1050mmeffective coverwidthandnominal25-30mmdeepribswith subtles quare flutingin the five panat nominal 180-250 mm center-to-center.Theendribshallbedesignedfor anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened withmin.25umZinc-Tinalloycoated,Hexhead,self- drillingscrewetc.complete.(weightofprofile4.52Kilogram / SquareMetre ).

Turbo ventilator 24" MATERIAL RATES FOR SSR For Year 2021-22,Page no. 374, Building (Bd-R : Rofing and ceiling)

Providing and fixing UPVC Roof made up of 3 layersroofingmaterialofthickness2mmhavingwidthof 1130mmandofrequired Lengthhaving Tensilestrength notlessthan330Kilogram/cm2,includingfastening withselfdrillingscrewhavingwashersmadeof stainless steel etc. complete.

Royalty Charges

Royalty Charges for sand

Royalty Charges for Rubble and HM

Material Testing Charges

Comp. Strength-Cube (M 10,M 20,M 25)

Crush Metal-Basic Test

Gradation

Comboned Flakiness & Elongation of Single metal

Cement-Fineness, consistency.Setting time,Compressive strength,Specific Gravity

Sand-FinenessModulus,Silt Content

Water Absorption (Set of 5 Bricks),CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Electrification

Supplying,erecting&terminatingFRXLPEinsulated, galvanisedsteelformedwirearmoured(strip)cable1100V, 3core6sq.mm.aluminiumconductorcompleteerected withglands&lugs,onwall/trusses/pole or laidin provided trench/ pipe as per specification no. CB-LT/AL7-1-9

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR 16-1-1

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying providedcablesuptovoltagelevel1.1Kvcablecompleteas per specification No. CW-EXN-CTR16-1-2

Supplyinganderectingmainswith3x2.5sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Busbarsoranyotherplacesas per specification No: WG-MA/BW1-3-11

Supplying&erectingCRCAsheetmetalenclosuresof 1.2mm thickness with 10A, 2 pin plug & earth socket and 10A,3pinplugtopwith10AsinglepoleMCBhavingrated short-circuitbreakingcapacity(Icn)10kAcomplete erected on angle iron / GI frame. 5-4-20

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW 1-9-1

Supplying&erecting10-12W,230VintegraltypeLED Lamp suitable for B-22 /E-27 base. 2-10-11

Supplying and erecting LED street light fitting 12 to 18 W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. 2-5-1

SupplyinganderectingStreetlightbracketmadefrom40 mm.dia‘B’class G.I.Pipe, 0.6m. in length alongwith pole cap of 300 mm length and 80 mm dia duly welded with providedleadsasperspecificationno.FG-BKT/BPC2-9-2

Providngearthingwith galvanized iron earth plate size 60 x 60x0.6cmcompletewithallmaterials,testing&recording the results as per specification no. EA-EP9-1-1

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20mmdia.G.I.Rodcompletewith allmaterialstestingand recording the results as per specification no. EA-EP9-1-4

Supplying, erecting & marking DPMCB 6A to 32A, C- series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB5-3-6

Supplying, erecting&markingSPMCB6Ato32A,B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW- SWR/MCB5-3-2

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetingetc. and paintingwith one coat ofred lead paint and 2 coats of enamel paint. 6-1-2

Supplyingand erectingmarine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessarymaterials such as screws, wall fasteners, supports, nutboltsetc.completewithcompliancetoIS720:20106- 1-14

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no.SW-SWR/MCBDB1 5-4-1

Supplying&erectingG.I.pipe‘A’class25mmdia.erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-1

Supplying&erectingG.I.pipe‘A’class40mmdia.erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-2

Supplyingandlaying(includingexcavationofsuitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugatedpipes(DWC)ofHDPEforenclosingcable below ground/road surface, to required depth complete. 7-6- 10

Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPEarmouredcableasperspecificationNo.CB-GL7-7-2

SupplyinganderectingCeilingrose/Battenholder/ Slanting holder / hanging cord switch / hanging bell push / pendantholderbakelitebase6A.erectedonfilled polypropyleneboardorpolisheddoublewoodenblock/ PVC junction box. 1-7-7

Point wiring for independent plug in 20 mm metal conduit with1.5sq.mm(2+1E)FRLSHgradecopperwire,flush typeswitch,earthingandrequiredaccessoriesasperspecification No: WG-PW/SW 1-9-4

Wiring for plug on board with Switch socket surface/concealed type, copper wiringand earthingand with modularaccessoriesasperspecificationNo:WGPW/CW1- 9-13

Supplyinganderectingmainswith2x2.5sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbarsorany otherplaces. as per specification No: WG-MA/BW 1-3-2

Supplyinganderectingmainswith2x4sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbarsorany otherplaces. as per specification No: WG-MA/BW 1-3-5

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 1-8-8

Supplying, erecting and marking double pole isolator only switchversionofminiaturecircuitbreakerof40Awith requiredwiringconnectionsandlugsetc.inprovided distribution board. 5-3-20

Supplying&erecting3W,230VintegraltypeLEDLamp suitable for B-22 / E- 27 base. 2-10-9

SupplyinganderectingLEDstreetlightfittingsuitable above 26W to 36W lamp, including lamp, with PF > 0.95 classIP65andabovehousingofpressurediecast aluminiumalloyandheatsinkextrudedaluminium complete as per specification No FG-ODF/FLS2. 2-5-3

Supplying and erecting regular/ standard model ceiling fan of900/1050mm.sweepcompleteerectedinpositionasper specification no. FG-FN/CF 2-12-2

Supplying and erecting ding dong / electronic musical type callbellwithheavydutycoilsuitabletooperateon230V A.C. supplyerected on olished double woodenblock/sunmica block of suitable size. 2-3-13

SupplyinganderectingStreetlightbracketmadefrom25 mm.dia‘B’class G.I.Pipe, 0.6m. in length alongwith pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 2-9-1

Supplying&erectingCRCAsheetmetaloneway enclosuresof1.2mmthicknesssuitableforDPMCB/TP MCB/FPMCB/RCCB/RCBOcompleteerectedonangle iron/GI frame. 5-4-23

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. 5-3-24

Construction of Strural Fabrication & Erection Of 500MT Onion Storage

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoringandstruttingetc.complete.(LIFTUPTO1.5M.) By Mechanical Means

ExcavationforfoundationinHardmurumincluding removingtheexcavatedmaterialuptoadistanceof50 metresbeyondthebuildingareaandstackingandspreading as directed, dewatering, preparing the bed for thefoundationandnecessarybackfilling,ramming, watering including shoring andstrutting etc.complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec.No. : Bd.A.12 Page No. 264 ;

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.

ProvidingandlayingCastinsitu/ReadyMixcement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided, finishingifrequiredandcuringcomplete,withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrumTypemixer/concreteBatch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)

ProvidingandlayinginsitucementconcreteofM-25 grade of trap / granite/quartzite/gneiss metal for R.C.C. worklikeraft,grillages, strips, foundationsand footings ofR.C.C.columnsandsteelstanchionsincludingbailing- outwatermanually,includingcenteringformworkof plywood/steel,compaction,coveringnewlylaid concrete by gunny bag, plastic or tarpaulin, finishing the formedsurfacewithcementmorter1:3ofsufficient minimumthicknesstogiveasmoothand evensurfaceor rougheningifspecial finish is to be provided and curing etccomplete.(Excludingreinforcement)Thecement mortar1:3plasterisconsideredforrenderinguneven andhoneycombedsurfaceonly.(Woodenplanks/ shutteringwillnotbeallowed)Spec.No.:Bd.F.2Page No. 298 /IS 456 (1978)

ProvidingandlayingCastinsitu/ReadyMixcement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing orasdirectedincludingsteelcentering,formwork,cover blocks,laying/pumping,compactionfinishingthe formedsurfaceswithcementmortar1:3ofsufficient minimumthicknesstogiveasmoothandevensurfaceor roughening if special finish is to be provided and curing etc.complete,(Excludingreinforcementandstructural steel).withfully automaticmicroprocessorbasedPLC withSCADAenabledreversibleDrumTypemixer/ concreteBatchmixplant(Panmixer)etc.complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

ProvidingandlayingCastinsitu/ReadyMixcement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawingsorasdirectedincludingsteelcentering, formwork, cover blocks, laying/pumping, compactionandroughening the surface if specialfinish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fullyautomatic microprocessorbasedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

ProvidingandfixinginpositionTMT-FE-500bar reinforcement ofvarious diameters for R.C.C.pile caps, footings,foundations,slabs,beamscolumns,canopies, staircase,newels,chajjas,lintelspardis,copings,fins, archesetc.asperdetaileddesigns,drawingsandschedules. including cutting, bending, hooking the bars, bindingwithwiresortackweldingandsupportingas required complete.

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth ofexternal wallsincludingbailing outwatermanually,strikingjointsonunexposedfaces ,wateringandscaffoldingcomplete Bd.G.1,Page No.313

Providingsandfacedplasterexternallyincementmortar using approved screened sand, in all positions including basecoatof15mmthickincementmortar1:4using waterproofing compound at 1 kg per cement bag curing thesamefornotlessthan2daysandkeepingthesurface ofthebasecoatroughtoreceivethesandfacedtreatment6to8mmthickincementmortar1:4finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing structural steel work in trusses, other similar trussedpurlinsandmemberswithallbracing,gusset platesetc.asperdetaileddesignsanddrawingsoras directedincludingcutting,fabricating,hoisting,erecting fixinginposition,Makingriveted/bolted/welded connection and onecoat ofanti corrosive paintand over it 2 coats ofoil painting approved qualityand shade etc. complete.

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge.

Jaliweldedmesh50*2513GuageMATERIALRATES FOR SSR For Year 2021-22 Page No.374 Item No.24

Bamboo25mmdia.MATERIALRATESFORSSRFor Year 2021-22 Page No.382 Item No.18

ProvidingandfixingcolourcoatedZincalume(R)AZ 150(min150gms/sq.mt.totaloneachside)profiled sheets for roofing. The feed materialis manufactured out ofnominal0.45mmBaseMetalThickness(BMT) (0.5mmTCT),Hi-strengthsteelwithmin.550MPa yield strength, metallic hot dip coated with Aluminium- Zincalloy(55%aluminium43.4%zinc1.6%silicon) withCOLORBOND(R)steelqualitysuperdurable polyester paint coat (with in organic pigment). The paint shallhaveatotalcoatingthicknessofnominal35um, comprisingofnominal25umexteriorcoatontop surface and nominal 10um reverse coat on back surface. Profilesheetshallhavenom.950-1050mmeffective coverwidthandnominal25-30mmdeepribswith subtlesquare flutinginthe fivepanat nominal180-250 mmcenter-to-center.Theendribshallbedesignedfor anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval.Including fastenerswithmin. fastened withmin.25umZinc-Tinalloycoated,Hexhead,self- drillingscrewetc.complete.(weightofprofile

Royalty Charges

Royalty Charges for sand

Royalty Charges for Rubble and HM

ESHS Compliance

Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct

Prashant Sudam Dhotre (BID ID -5886490)