Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.0 LAccepted-AOC | ₹64.0 L | L1 | Accepted-AOC Accepted being lowest quoted tenderer |
| 2 | L2₹68.6 L+₹4.6 L (7.23%)Rejected-AOC C 125 A KUNWAR SINGH NAGAR NANGLOI NEW DELHI 110041 | NEW DELHI | WEST DELHI | DELHI | 110041 | ₹68.6 L+₹4.6 L (7.23%) | L2 | Rejected-AOC Rejected being other than lowest quoted tenderer |
| 3 | L3₹74.4 L+₹10.4 L (16.3%)Rejected-AOC AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | ₹74.4 L+₹10.4 L (16.3%) | L3 | Rejected-AOC Rejected being other than lowest quoted tenderer |
| 4 | L4₹75.7 L+₹11.8 L (18.4%)Rejected-AOC | ₹75.7 L+₹11.8 L (18.4%) | L4 | Rejected-AOC Rejected being other than lowest quoted tenderer |
| 5 | L5₹77.1 L+₹13.2 L (20.6%)Rejected-AOC M S 4BC PITAMPURA DELHI 110034 | DELHI | NORTH WEST DELHI | DELHI | 110034 | ₹77.1 L+₹13.2 L (20.6%) | L5 | Rejected-AOC Rejected being other than lowest quoted tenderer |
| Sl No | Description | Qty | Unit | Rajkaran Tubewells L4 | Channa Brothers and Co. L1 | M/S Satyam Associates L2 | M/S A P CONSTRUCTION L3 | Friends fire Engineers L5 | MTR GROUP & COMPANY L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Drilling reaming vertical bore 610 mm dia by reverse rotary drilling machine at approved site/location in any type of strata for 300 mm ERW casing pipe for various depth as shown below including all works to pertaing to boring ccomplete all as specified and directed by Engineer-in-Charge. Note :- Reaming upto 610 mm dia for 190 mtr depth from ground level for casing pipe 300 mm dia. | 400 | RM | 2,400 ₹9,60,000 | 1,975 ₹7,90,000 Lowest | 2,000 ₹8,00,000 | 2,500 ₹10,00,000 | 2,200 ₹8,80,000 | 2,200 ₹8,80,000 |
| 2.00 | Supply and assembling including jointing, lowering and fixing in position ERW plain steel pipe (Seemless) housing pipe 300 mm bore (nominal dia) 8 mm thickness and outer dia of pipe 322 mm shall be heavy duty 'C' class confirming to IS-4270 plain end pipe jointed and welded coupler ring (welding shall be done through out circumference of the pipe and coupler ring both sides complete all as specified and directed by Engineer-in-Charge.
Make - Jindal/Tata/Zenith. | 140 | RM | 8,200 ₹11,48,000 | 5,980 ₹8,37,200 | 6,600 ₹9,24,000 | 5,800 ₹8,12,000 | 5,200 ₹7,28,000 Lowest | 7,200 ₹10,08,000 |
| 3.00 | Supply and assembling including jointing, lowering and fixing in position plain ERW steel pipe (seemless) casing 200 mm bore 8 mm thickn and outer dia of piipe confirming to IS-4270 complete and lowering and fixing position after socket reducer 300x200 mm bore ccomplete all as specified and directed by Engineer-in-Charge. | 140 | RM | 3,500 ₹4,90,000 Lowest | 4,100 ₹5,74,000 | 3,800 ₹5,32,000 | 3,900 ₹5,46,000 | 5,200 ₹7,28,000 | 4,200 ₹5,88,000 |
| 4.00 | S&F M/S stainer (slotted) pipe V wired 200 mm bore 8 mm thick confirming to IS-4270 fabricated with pipe slote of size 1.55 mm x 75 mm as per IS provision uniformly distributed on the surface complete all as specified and directed by Engineer-in-Charge. | 80 | RM | 6,000 ₹4,80,000 | 3,480 ₹2,78,400 Lowest | 4,800 ₹3,84,000 | 5,500 ₹4,40,000 | 4,500 ₹3,60,000 | 5,150 ₹4,12,000 |
| 5.00 | S&F mild steel reducer socket 300x200 mm dia of suitable length including welding mild strip 40 x 6 mm 2 Nos on each joints extended in 75 mm on each side complete all as specified and directed. | 2 | Each | 6,000 ₹12,000 | 4,500 ₹9,000 Lowest | 5,500 ₹11,000 | 4,900 ₹9,800 | 6,500 ₹13,000 | 6,000 ₹12,000 |
| 6.00 | S&F wrought iron bail plug 200 mm bore complete all as specified and directed. | 2 | Each | 1,500 ₹3,000 Lowest | 3,000 ₹6,000 | 2,400 ₹4,800 | 1,600 ₹3,200 | 3,500 ₹7,000 | 1,800 ₹3,600 |
| 7.00 | S&F well cap for 320 mm dia housing pipe complete all as specified and directed. | 2 | Each | 2,000 ₹4,000 | 1,000 ₹2,000 Lowest | 1,600 ₹3,200 | 1,700 ₹3,400 | 3,500 ₹7,000 | 2,200 ₹4,400 |
| 8.00 | S&F mild steel centering guide made but of 50x6 mm mild steel flat iron made to shape complete all as specified and directed. | 120 | Each Set | 60 ₹7,200 Lowest | 150 ₹18,000 | 230 ₹27,600 | 2,800 ₹3,36,000 | 3,000 ₹3,60,000 | 95 ₹11,400 |
| 9.00 | S&F 2 Nos MS flat iron 150x15 mm housing clamp for holding to 300 mm dia housing pipe with 16 mm dia MS bolts& nuts and washers complete all as specified and directed. | 2 | Each Set | 4,500 ₹9,000 Lowest | 7,200 ₹14,400 | 7,000 ₹14,000 | 4,500 ₹9,000 Lowest | 10,000 ₹20,000 | 5,000 ₹10,000 |
| 10.00 | M&L for packing pea gravels of size 3 ro 5 mm natural shape brought direct from river bank packing around casing pipe to entire depth upto ground level complete all as specified and directed by Engineer-in-Charge. | 120 | Cum | 5,000 ₹6,00,000 | 3,400 ₹4,08,000 Lowest | 4,500 ₹5,40,000 | 4,500 ₹5,40,000 | 6,000 ₹7,20,000 | 6,000 ₹7,20,000 |
Tender Value
₹85.3 L
EMD Value
₹1.5 L
Closing Date
8 Nov 2025, 11:00 amClosed
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
PROVISION OF BOREWELLS AT PUMP HOUSE NO. 6 AND 7 AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.
2025_MES_736025_1
82041/W/E8
Open Tender
Civil Works
Item Rate
60 days
Prayagraj
Class C and Category a(ii)
6 documents required · 6 mandatory
₹1,000
GE (West) Prayagraj
₹1.5 L
Yes
18 Mar 2026
18 Oct 2025
15 Nov 2025
18 Oct 2025
8 Nov 2025
1 Nov 2025
Amount
Drilling reaming vertical bore 610 mm dia by reverse rotary drilling machine at approved site/location in any type of strata for 300 mm ERW casing pipe for various depth as shown below including all works to pertaing to boring ccomplete all as specified and directed by Engineer-in-Charge. Note :- Reaming upto 610 mm dia for 190 mtr depth from ground level for casing pipe 300 mm dia.
Supply and assembling including jointing, lowering and fixing in position ERW plain steel pipe (Seemless) housing pipe 300 mm bore (nominal dia) 8 mm thickness and outer dia of pipe 322 mm shall be heavy duty 'C' class confirming to IS-4270 plain end pipe jointed and welded coupler ring (welding shall be done through out circumference of the pipe and coupler ring both sides complete all as specified and directed by Engineer-in-Charge. Make - Jindal/Tata/Zenith.
Supply and assembling including jointing, lowering and fixing in position plain ERW steel pipe (seemless) casing 200 mm bore 8 mm thickn and outer dia of piipe confirming to IS-4270 complete and lowering and fixing position after socket reducer 300x200 mm bore ccomplete all as specified and directed by Engineer-in-Charge.
S&F M/S stainer (slotted) pipe V wired 200 mm bore 8 mm thick confirming to IS-4270 fabricated with pipe slote of size 1.55 mm x 75 mm as per IS provision uniformly distributed on the surface complete all as specified and directed by Engineer-in-Charge.
S&F mild steel reducer socket 300x200 mm dia of suitable length including welding mild strip 40 x 6 mm 2 Nos on each joints extended in 75 mm on each side complete all as specified and directed.
S&F wrought iron bail plug 200 mm bore complete all as specified and directed.
S&F well cap for 320 mm dia housing pipe complete all as specified and directed.
S&F mild steel centering guide made but of 50x6 mm mild steel flat iron made to shape complete all as specified and directed.
S&F 2 Nos MS flat iron 150x15 mm housing clamp for holding to 300 mm dia housing pipe with 16 mm dia MS bolts& nuts and washers complete all as specified and directed.
M&L for packing pea gravels of size 3 ro 5 mm natural shape brought direct from river bank packing around casing pipe to entire depth upto ground level complete all as specified and directed by Engineer-in-Charge.
M&L for development of tube well by means air compresser 600 PSI including equipment fitting and supply sodium hepta sulphate 60 Kg complete all as specified and directed by Engineer-in-Charge.
All as per item No- 11 above by means for over pumping for subsequent hours untill clear discharge complete all as specified and directed by Engr-in-Charge.
Supply only strata sample box with glass cover 3 mm thick complete all as specified and directed.
M&L for biological and potability testing of water sample carried out from NABL approved lab water testing to be done for organoleptic & physical parameter for general parameters concerning substance undesireable in excessive amount for parameters concerning toxic substance for pesticide residual limit and biological test of water smple as per IS 10500:2012 complete all as specified and directed.
Yield testing of bore well by contineouse pumping for 16 hrs to determine safe pumping yied of the tube well complete .
Electric logginig of bore well perecise delineation of granular zones and also the quality of ground water including reports interpretation complete all as specified and directed by Engineer-in-Charge. Note : (a) Electric logging shall be carried out by approved agency. (b) Unit rate quoted, developing and testing etc at side of work and renewal of the same on completion from the site including necessary supervison and rental charges of rig mchacine compressor and OP unit (any other T&P not specifically inventioned) and no extra payment shall be admissible on this account.
Supply lowering jointing and testing MS black coloumn pipe 3 mtr long heavy duty 150 mm bore wall thicknes 5.4 mm both ends flanged with heavy duty flanged not less than 16 mm screwed and welded inside and outside. The flanged ebd making surface shall be smooth including welding of 04 strip of 5.04 mm thick 25 mm wide and 50 mm long conversing pipe and flanged both end flanged having 08 Nos predrilled hole not less than 16 mm including rubber gasket nut bolts and washers, pipe should be duly painted with anti corrosive complete all as specified and directed by Engineer-in-Charge.
S&F PVC insulated flat copper submersible cable heavy duty 25 sqmm 3 core, 1100 volts grade complete all as specified and directed.
Supply, installation, testing and commissioning of submersible pupm set, electric driven, 415 V, 50 Hz, three phase, 40 HP, speed 2900 rpm (sync), delivery size suitable for 150mm NRV, having discharge capacity 1000 litres per minute at 75m head, suitable for lowering inside existing casing pipe of bore well (300/350 mm) including necessary jointing with MS column pipes with flanged joints, with rubber gaskets, nut, bolts and washers of required size and including electrical connection from starter panel to motor with submersible cable, complete all as specified and directed. Make:- KSB Cromption Greaves/ Calama / Kirloskar Note:- (i) Column pipe with flanged joints and submersible cable will be measured and paid separately. (ii) The cost of necessary T&P shall deemed to be included in rates quoted.
Supply, laying jointing testing DI pipe 150 mm bore with flanged ends (both ends flanged) centrifugally cast class 'K 9' in trenches/floor complete including all fittings complete all as specified and directed.
M&L for rubber or fibre board gasket flanged joints and fittings suitable for 150 mm bore DI pipe with suitable size nut bolts & washers of required numbers complete all as specified and directed.
Material & labour for Ductile iron fittings or special for flanged ends size up to 150 mm bore pipes conforming ti IS : 1538, like bends (any radious and angle) taper any type (Straight, end increasing, decreasing or double socket etc) tail pieces single branches, Ý' junction double branches,crosses (all flanged ends) complete all as specified & directed.
M&L for cutting jointing making water connection with 150 mm dia existing pipe line complete all as specified and directed.
S&F 150 mm bore sluice valve heavy duty both ends flanged class PN-1.6 with high tensil brass spindle cast iron head perated wheel and cap top, nut bolt & washers including 3 mm thich rubber gasket joint complete all as specified and directed.
Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out for taking out/laying of CI/DI pipe line complete all as specified and directed.
Retunring filling in including spreading levelling and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing of surplus soil to distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point all as directed.
M&L for PCC type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) for foundation complete all as specified and directed by Engineer-in-Charge
M&L for PCC type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) for foundation complete all as specified and directed by Engineer-in-Charge
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed by Engineer-in-Charge
Supply and fix strucural I Section MC 200 steelrolled section Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates length all as specified and directed.
S&F 150 mm bore cast iron non returning valve, heavy duty both end flanged with nuts, bolts and washers including 3 mm thick rubber gasket joint complete all as specified and directed.
S&F 300 mm bore discharged head both end flanged with nuts, bolts and washers including 3 mm thick rubber gasket joint complete all as specified and directed.
M&L for RCC type B1 (1:2:4) 20 mm graded crushed stone aggregate for column, piller, piers, posts and strust complete all as specified and directed by Engineer-in-Charge.
Supply, installation, testing and commissioning in replacement of indoor type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and CPRI approved manufacturer factory fabricated with CRCA sheet not less than 3 mm thick having modern fabrication process powder coating in approved shade provided with suitable gaskit to make it dust and varmin proof and general constructions conforming to IS : 8623/93. The LT panel shall be front and back openable and duly compartmentalized for each control gears.The panel should have suitable size of aluminium Bus -bar three phase 4 wire system having current carrying capacity 400 Amps of the incomer MCCB. The panel should have the following incoming and out going controlls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engineer -in-charge. (PCC platform of suitable size for mounting the LT Panel is deemed to be included in the quoted rate )
(i) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 160 Amp - 01 No. (ii) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 100 Amp - 01 No (iii) Star delta starter comprising suitale size of 3 pole contactors for 40 HP submersible pump with thermal over load relay complete - 01 No (iv) Motor protection relay for single phase, over load, over voltage (v) Digital Volt meter 0-500 volts (vi) Ammeter 0-500 amps with suitable size of Cts (vii) All connections to be done through suitable size PVC insulated copper cables (viii) LED RYB indicator - 01 Set (ix) MCB' TP 32 Amps 10 KA - 01 No (X) MCB SPN 32 Amps 10 KA - 01 No (xi) Single phase preventer - 01 No Make of MCCB, MCB & Contactor: L&T (MNX Series), Hagger, Siemens,
M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to GI strip 25x4 mm dia by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 40mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
M&L Construction of brick masonery valve pit chamber chamber of size 1050mm x 1050 mm x 1050 mm (internal dimention) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally), 40mm thick PCC coping in PCC 1:2:4 and including 3mm thick mild steel sheet cover fixed in angle iron frame of 40x40x6mm and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for brick work with Sub class B straight or curved on plan exc 6m mean radius as in brick pillars (for supporting pipe lines) built in cement mortar 1: 4 complete all as specified and directed by Engineer-in-Charge
M/S Satyam Associates (BID ID -3481438)
M/S A P CONSTRUCTION (BID ID -3484603)
Rajkaran Tubewells (BID ID -3478804)
Friends fire Engineers (BID ID -3487258)
MTR GROUP & COMPANY (BID ID -3481840)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Specialcondition.pdf
Additional Documents • 0.45 MB
BOQ_824160.xls
BOQ • 1.05 MB
Tenderdocument.pdf
Tender Documents • 0.59 MB
Particularspecification.pdf
Additional Documents • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .