CA NO GE/AFJ-15/2021-22 REPAIR TO FENCING, COMPOUND WALL, DRAIN AND MISC WORKS IN DOMESTIC AREA AT AF STN JAMMU

Amount

Demolition of cement concrete in ground floors and paving (un reinforced) including Tiles Pavings blocks if any n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

100mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in floor, path, hard standing etc finished even and smooth with out using extra cement.

M & L for hard core of guage exc 63 mm but not exc 100mm deposited , spread, and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface using broken stone all as specified and directed.

M&L for forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'B' all as specified and directed.

M & L for PCC 1:4:8 type D-2, 75 mm thick (using 40 mm graded stone aggregate) as in sub base all as specified and directed.

40mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, finished even and smooth with out using extra cement.

Supply only glass dividing strips 38 mm wide and 3 mm thick all as specified and directed.

Cement concrete tiles 25cm x 25xm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge

Machine pressed precast concrete inter locking paver blocks any size and shape of 60mm to 65mm thickness, M-35 grade with Grey crment and no pigment laid over 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge

M&L for precast factory made designed vetrified parking tiles of different colour and shapes of size 300 x300 x10mm laid and jointed with grey cement slurry mixed with pigment to match the shade of tiles , thickness not less than 20 mm and compressive strength not less than 250 Kgs /Sqm complete including 20 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge (Sample kept in AGE office) Make Oyster/ Onyx/ Oak/ dura stone

M&L providing Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar 1:2:4 type B-1 (20 mm graded Aggregate) as in Kerb Stone including necessary form and fixing to side of interlocking path in cement morter 1:4 complete all as specified.

Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

RCC 1:2:4 type B-1 ( 20 mm agg) as in footing / plinth beam / bases of columns etc complete in all respect.

RCC 1:2:4 type B-1 ( 20 mm agg) as in columns/pillars etc complete in all respect.

RCC 1:2:4 type B-1 (20 mm graded stone agg) as in shelves, facia beams ,chajjs slabs, similar suspended work including necessary form work etc complete. etc complete. in all respect.

Precast RCC (1:2:4) type B-1 using 20 mm graded stone agg as cover slab fo man holes etc including form work complete in all respect.

TMT steel bars 10mm dia and over cut to length bent to shape required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.90mm dia all as specified and directed.

All as irem No 17 but 6 to 8 mm dia as in stirrups etc complete

Form work to side of footing/ bases of columns , plinth beam etc complete

Form work to side and soffits of beams etc complete

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, all as specified.

All as per description of serial item No 22 above but except bricks.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4.

All as per description of serial item No 24 above but except bricks.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.

Rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth w/o using extra cement complete all as specified

All as item No 27 but other then fair finishes etc complete.

Extra for fair finished drain 30cm inner girth in cement concrete, using extra cement all as specified.

M&L Precast RCC Jallies,1:2:4 Type B0, 25mm thick ,set in CM 1:4

M&L PCC 1:4:8 type D-2(40 mm graded stone agg) as Foundation, Filling, mass concrete to fdn etc complete

PCC 1:3:6 type C-2 (40 mm graded stone agg) as in surface channels and drains.

PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work complete all as specified.

Dismantling barbed wire fencing of any type complete all as specified.

Dismantling wrought iron or mild steel work such as agle iron fencing post and similar type work or any description not other wise provided. complete all as specified.

Dismantling structural steel work including door, Gates etc. complete all as specified.

Dismantling posts or struts embedded in concrete (Wood, steel or RCC ) any section including taking out embedded portion and making good disturbed ground complete all as directed at site.

M&L Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good. Complete in all respect as directed.

M&L for MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc including necessary welding confirming to Fe-290 Gde E -165 Complete in all respect as directed.

Supply only chain link MS galvanised fencing of mesh size 100x100 mm x 4mm dia (not less than 1.98 kg per Sqm), all as specified and ddirected.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, all as specified.

12mm dia MS screw bolts (Machine made) with hexagonal or squre head at one end,screwed at otherend, length of bolt exceedding 5cm and n.exc 10cm with one washer,all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barba at 75 mm spacings and staining and fixing to any type of standard rails strain ing bolts , including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (eachline wire to be measured ). Complete in all respect as directed.

All as item No 44 above but fixing only. Complete in all respect as directed.

M&L for mild steel works as in framed work such as grills gratings etc with ends of bars shouldered and / or rebated or forged into spikes framed guard bars barred iron doors etc conforming to gde Fe 410-0 or Fe 310-0 welded on spot to existing MS frame work of window all as specified.

S&F in repair including dismantaling of existing AC/CGI sheet,Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, including bending or turning up, mitred angles, etc. as require. Complete in all respect as directed.

S & F MS work as in fencing post and similar works confirming to GDE fe 410 -0. Complete in all respect as directed.

All as item No 48 above but fixing only

M&L Mild Steel sections confirming to FE-410-W as inFramed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge

All as item No 50 above but Fabrication and Errection only

Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified.

Applying two coats of cement base paint on newly plastered walls surface including preparation of old treted surface complete all as specified and as directed.

Removal of excavated soil not exceeding 50m and depositing where directed as a level n.exc 1.5m above the starting point complete all as specified.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area

Rakesh Kumar Malia

Karmnaya Construction

M/s Mohan lal

bamral builder

MOHINDRA ENTERPRISES

Tawi Constructions

M/S GEE EMM MIR

SHALIMAR CONSTRUCTION CO