Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC | L1 | Accepted-AOC FIRST LOWEST BIDDER | |
| 2 | L2₹38.3 L+₹16.9 L (79.0%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208 c/o 56 APO
CERTAIN REPAIR REPLACEMENT AND CLEARING OF SEWAGE LINE MANHOLES SEPTIC TANKS AND SOAK WELLS AT RSS ENCLAVE SHITLA ENCLAVE AND CERTAIN OTM ACCN AREA AT NAGROTA MIL STN UNDER AGE BR-I OF GE NAGROTA
2023_MES_596419_1
GEN-8539/2023-24
Open Tender
Civil Works
Item Rate
270 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Nagrota
₹80,000
Yes
3 Jul 2023
18 May 2023
26 Jun 2023
18 May 2023
19 Jun 2023
1 Jun 2023
Amount
SCHEDULE ‘A’ PART-I M & L for Cleaning/clearing of sewage line (including manholes except 1st manhole) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain with combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed including taking of manhole cover and re-fixing the same after cleaning complete all as specified and directed
M & L for Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging complete all as specified and directed.
M & L for Taking out/Pumping out contaminated sewage water from septic tank/soakage well including inlet/outlet chamber after plugging incoming sewage line through combined high pressure water jetting cum suction (vaccum) type machine mounted on HCV Honey succer vehicle of capacity not less than 6000 ltrs each and facility of high pressure vaccum and removing off the same in the pit to a placet all as directed by Engineer-n-Charge. Note;One lorry unit will be considered for full load of 6000ltrs irrespective of taking out complete all as specified and directed .
M & L for Desludging the solid sludge from septic tank, soakage well including inlet/outlet chamber, removing out all scum, silt reduce sludge (both organic/inorganic nature) after plugging the incoming sewage line through combined high pressure water jetting cum suction (vacuum) type machine mounted on LMV/HMV and facility of high pressure vacuum and removing and dumping off the same in the tank to a place out side cantonment at the place marked for the purpose by local municipality or area controlling authority complete all as specified and directed.
M & L for Cleaning of soil waste pipe (cast iron/PVC )75/100mm bore laid in ground any slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch as well as around the manholes to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc complete all as specified and directed.
M & L for Cleaning/clearing of IWC/ EWC, gully trap /floor trap including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning etc complete all as specified and as directed. Note: Cleaning of PVC/CI pipe from first floor / ground floor embedded in floor or fixed to wall included in this item
M & L for Cast iron oval access covers / inspection cover with bolts rubber gasket to make it water tight for 75mm/100mm bore CI fittings including taking out broken/ unserviceable cover with bolts etc and removing from site complete all as specified and directed
S&F SFRC Manhole Cover of SIZE 1200X500X65mm thick with angle Iron frame set in CM 1:4 Complete all as specified and as Directed.
Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and directed
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
Supply and fix factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.
Supply and fix factory made HDPE door shutter 30mm thick , HDF door shall be of Quality of Hihg Density Fiber (HDF) panel board doors includes High Quality Timber frame with machine filled Poly Urethane foam (PUF) core of minimum 45 Kg/Cum Density and 3.20 mm thick HDF facing layer, and jointed together with solvent cement complete all as specified and as directed.
S & F 35mm thick 2nd class hard wood as in plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as specified and as directed.
S & F 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.24 (a) complete all as specified and as directed.
M & L for Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed
M & L for Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed
S & F Aluminum anodized barrel tower bolt extruded section 150mm long Complete all as specified and as directed.
S & F 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed Complete all as specified and as directed.
S & F in Aluminum anodized handles fabricated type of 150mm long Complete all as specified and as directed.
S & F Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 Complete all as specified and as directed. Note:- Wire mesh and sheet glass shall be measured and paid for separately
S & F Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS Complete all as specified and as directed. Note:- Wire mesh and sheet glass shall be measured and paid for separately
M & L for Preparing of new or untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M & L for Preparing of New or previouslyuntreated wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer Complete all as specified and directed.
Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil complete all as specified and directed.
Returning filling in including, spreading, leveling watering and well ramming in layer not exceeding 25cm in each layer complete all as specified and directed.
Removing excavated material not exceeding 50 M and depositing where directed at level not exceeding 1.5m above the starting pointing complete all as specified and directed.
M & L for Plain cement concrete 1:4:8 as in foundation type D-2 (using 40mm graded crushed stone aggregate) as in fdn filling or mass concrete complete all as specified and as directed.
M & L for Plain cement concrete 1:2:4 type B-1( using 20mm graded aggregate) as in benching, coping including watering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.
M & L for Brick work with sub class B (old size) well burnt bricks, straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.
M & L for TMT mild steel bars 10MM dia and over cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips all as specified and directed.
M & L for Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover all as specified and set in CM 1:4 complete all as specified and directed.
M & L for Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or concrete surfaces , finished even and smooth without using extra cement mixed with water proof compound complete all as specified and directed. ( WPC shall be measured and paid separately. )
Supply only water proof compound complete all as specified and directed.
Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar complete all as specified and directed.
Demolition and breaking up 200 mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar complete all as specified and directed.
M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and directed.
M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 200mm bore pipe complete all as specified and directed.
M & L for Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed complete all as spd and directed
M & L for Salt -Glazed stoneware drain pipes 200 mm dia laind in trenches and jointed complete all as spd and directed
M & L for 200mm Bore / inner dia double wall, corrugated HDPE Pipe (SNB) (ISI Marked) with integral socket & necessary fitting jointing as directed & laid in trenches complete all as specified and directed
M & L for 150mm Bore / inner dia double wall, corrugated HDPE Pipe (SNB) (ISI Marked) with integral socket & necessary fitting jointing as directed & laid in trenches complete all as specified and directed
M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified.
S&F in repair Vitreous china squatting pan of 'Orissa pattern' long pan size 580 x 440 mm white with integral foot rest incl ‘P’ or ‘S’ trap and flush pipe etc complete incl making good the floorcomplete all as specified and directed.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white "P or S Trap" , excluding flushing cistern & flush pipe complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle inluding brackets.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for like MH cover, bdrain pipe bed, hard standing etc complete all as specified and as directed.
M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase and pavings complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L glazed ceramic coloured tiles 300x200x7mm / 450x300x7mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over & including 10 mm thick screed bed or bedding layers in cement mortar 1:4 complete all as specified and directed.
M & L for Non skid coloured ceramic tiles 7 to 8mm thick exc 0.11 sqm but n. exc 0.18 in floor etc and jointed with cement slurry and pointed with white or coloured cement to matchwith tiles over & including 150 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed.
M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement.complete all as specified and directed..
M & L for 15mm thick screed or screed bedding in cement mortar 1:4 as a sub base to Chequered tile complete all as specified and directed.
M & L for Cement concrete chequered tiles of size 30 cm x 30 cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors complete all as specified and directed.
Dismantling/taking down CI/PVC/AC pipes of exc 50mm dia with all including fittilngs complete all as specified and directed
M & L for 100mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.
M & L for 80mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.
M & L for upto 150mm bore Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.
M & L for UPVC Pipes (SCH-80) of 75MM fittings on walls/ceiling or laying in floors fittings Complete all as specified
M & L for UPVC Pipes (SCH-80) of 100MM fittings on walls/ceiling or laying in floors fittings complete all as specified and directed.
S&F PVC (SWR) bends of 110mm bore complete all as specified and directed. .
S&F PVC (SWR) bends of 75 mm bore complete all as specified and directed. .
S&F PVC (SWR) Branch Piece double equal or unequal of 110mm bore complete all as specified and directed. .
S&F PVC (SWR) Branch Piece double equal or unequal of 75 mm bore complete all as specified and directed.
S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof or 75mm bore pipe complete all as specified and directed..
S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 100mm bore pipe complete all as specified and directed..
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Provided M & L for cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's, rain water pipes and similar works complete all as specified and directed. Note :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools and Plants. Each labour shall intertain complaints everyday in working hours. 2. The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day. 3. Futhermore, the feedback shall be given by the contractor/supervisor to concened JE from all aspect.
SHARMA TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .