Construction of extension of new building for Burnpur Girls High School at SAIL ISP Burnpur

DSR-2023 DESCRIPTION Total amount (Rs.)

GRAND TOTAL AMOUNT (DSR + NDSR) 2,82,30,000.00

Bill of Quantity

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

B 2.00 EARTH WORKS

Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on

1 2.6 plan) including getting out and disposal of excavated earth lead upto 50 m and lift

upto 1.5 m, as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydralic excavator/manual

means)over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on

plan) including getting out and disposal of excavated earth, lead upto 50m and lift

upto 1.5m, as directed by Engineer - in Charge

2.2 2.7.3 Hard rock (blasting prohibited) Cum - 1,432.95 -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

3 2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each Cum 628.87 196.00 1,23,258.62

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and

watering of the earth in layers not exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete

Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not

6 2.28 exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. - -

i 2.28.1 All kinds of soil Sqm 355.00 34.15 12,123.25

7 2.34 Supplying chemical emulsion in sealed containers including delivery as specified - -

i 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 145.67 234.75 34,195.64

TOTAL (Carried Over to Summary of Civil Works) 5,10,523.92 0.00

C 4.00 CONCRETE WORKS 0.00

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded

stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40 mm thick with cement

concrete 1 :2:4 (1 cement: 2 coarse sand (zone-Ill) derived from natural

sources: 4 graded stone aggregate 12.5 mm nominal size derived from

natural sources)

Extra for providing and mixing water proofing material in cement concrete work Per 50 kg

3 4.12 in doses by weight of cement as per manufacturer's specification. 13.20 18.15 239.58

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of

approved quality using 1.7kg per square metre on damp proof course after

cleaning the surface with brushes and finally with a piece of cloth lightly soaked in

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3

coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over

5 4.17 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and Sqm 45.00 749.30 33,718.50

consolidated and grouted with fine sand, including necessary excavation, levelling

& dressing & finishing the top smooth.

TOTAL (Carried Over to Summary of Civil Works) 0.00 5,74,695.88 0.00

D 5.00 REINFORCED CEMENT CONCRETE WORK 0.00

Centering and shuttering including strutting, propping etc. and removal of form for

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 374.10 392.15 1,46,703.32

Walls (any thickness) including attached pilasters, butteresses, plinth and string

c 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 920.27 927.25 8,53,320.29

d 5.9.4 Shelves (Cast in situ) Sqm 35.60 927.25 33,010.10

e 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 724.56 736.40 5,33,566.53

f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 715.33 961.30 6,87,644.03

g 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 133.24 764.95 1,01,924.87

k 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sqm 29.24 951.10 27,805.68

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete upto plinth level.

i 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 18,393.92 107.85 19,83,784.41

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

i 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 39,944.03 107.85 43,07,963.12

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of laying, curing,

4 5.33.1 carriage for all leads; but excluding the cost of centering, shuttering, finishing and - -

reinforcement as per direction of the engineer-in-charge; for the following grades

of concrete. Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the cement content in

design mix is more than 110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or bear the cost of

a) 5.33.1 All works upto plinth level. - -

i 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 203.17 9,504.75 19,31,093.13

b) 5.33.2 All works above plinth level upto floor V level. - -

i 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 284.92 9,860.40 28,09,453.21

Add for using extra cement in the items of design mix over and above the specified

5 5.35 quintal - -

cement content therein.

TOTAL (Carried Over to Summary of Civil Works) 0.00 1,35,56,671.29 0.00

E 6.00 BRICK WORK 0.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 31.53 7,132.25 2,24,852.65

Brick work with non modular fly ash bricks conforming to IS:12894,

2 6.34 class designation 10 average compressive strength in super structure - -

above plinth level up to floor V level in :

i 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 239.94 8,752.55 21,00,103.43

Half brick masonry with non modular fly ash bricks of class designatio 10,

conformingio IS :12894, in super structure above plinth and upto floor V level.

3.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 112.05 1,105.80 1,23,908.33

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

TOTAL (Carried Over to Summary of Civil Works) 24,60,607.58 0.00

F 8.00 MARBLE & GRANITE WORK

Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished)

machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over

1 8.2 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated -

with white cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edge to give high gloss finish etc.

complete at all levels.

b) 8.2.2 Granite of any colour and shade - -

8.2.2.2 Area of slab over 0.50 sqm Sqm 1.18 5,136.30 6,040.72

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

1 8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 153.68 1,267.95 1,94,860.71

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

TOTAL (Carried Over to Summary of Civil Works) 2,00,901.43 0.00

G 9.00 WOOD, WPC & uPVC WORK

Providing and fixing ISi marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction

1 9.21 with frame of 1st class hard wood and well matched commercial 3 ply -

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

30mm thick including ISi marked Stainless Steel butt hinges

with necessary screws

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush

2.0 9.24 doors (cost of glass excluded) (overall area of door shutter to be measured): - -

2.01 9.24.1 Rectangular or square Sqm 13.16 199.15 2,620.59

Providing and fixing M.S. grills of required pattern in frames of windows etc. with

M.S. flats, square or round bars etc. including priming coat with approved steel

primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing aluminium extruded section body tubular type universal

hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,

4 9.84 door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with Each 0.93 983.15 917.67

double speed adjustment with necessary accessories

and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic

32 9.96 coating not less than grade AC 10 as per IS : 1868), transparent or dyed to - -

required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating

33 9.97 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour - -

or shade with nuts and screws etc. complete-

Providing and fixing aluminium handles ISI marked anodised ( anodic coating not

34 9.100 less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or - -

shade with nuts and screws etc. complete-

Providing and fixing aluminium hanging floor door stopper, l5l marked, anodised

(anodic coatinS not less than grade AC 10 as per 15 : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete. Twin rubber

Providing and fixing bright finished brass 100 mm mortice latch and lock, lSl

marked, with six levers and a pair of anodised (anodic coating not less than grade

Ac 10 as per 15 : 1868) aluminium lever handles of approved quality with

necessary screws etc. complete

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and

37 9.135 clerestory windows using wire gauge with average width of aperture 1.4 mm in - -

both directions with wire of dia. 0.50 mm all complete.

37.2 9.135.2 With 12 mm mild steel U beading Sqm 28.03 1,228.00 34,419.20

TOTAL (Carried Over to Summary of Civil Works) 4,53,267.32 0.00

H 10.00 STEEL WORK

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed

mild steel welded or rigidly fixed together by mechanical means, including

1 10.14.1.1 M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and Rmt 177.42 583.30 1,03,487.30

shock absorbers as specified and applying a coat of approved

steel primer after pre-treatment of the surface as directed by Engineer in-charge:

Profile B Fixing with adjustable lugs with split end tail to

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle

iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings

complete, including applying a priming coat of approved steel primer. Using M.S.

angels 40x40x6 mm for diagonal braces.

3 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet

with its top surface hacked for proper bonding, top lid shall be screwed into the

cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at

the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per

standard drawing.

Providing and fixing in position collapsible steel shutters with vertical channels

20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and

3 10.3 bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with sqm - 11,439.60 -

bolts, nuts, locking arrangement, stoppers, handles, including applying a priming

coat of approved steel primer.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet

with its top surface hacked for proper bonding, top lid shall be screwed into the

cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at

the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per

standard drawing.

Steel work welded in built up sections/ framed work including cutting, hoisting,

5 10.25 fixing in position and applying a priming coat of approved steel primer using - -

structural steel etc. as required

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing hand rail of approved size by welding etc. to steel

6 10.26.1 ladder railing, balcony railing, staircase railing and similar works, including KG 206.92 196.80 40,722.82

applying priming coat of approved steel primer. M.S. tube

TOTAL (Carried Over to Summary of Civil Works) 5,32,523.48 0.00

I 11.00 FLOORING WORK

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed

with grey cement slurry mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete.

3 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand metre 101.20 191.40 19,370.12

11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4

Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc., complete.

TOTAL (Carried Over to Summary of Civil Works) 17,53,331.77 0.00

J 12.00 ROOFING

Providing and laying gola 75x75mm in cement concrete M15 grade including

1 12.21 finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in rmt. - 305.15 -

75x75 mm deep chase.

TOTAL (Carried Over to Summary of Civil Works) 0.00 0.00

K 13 FINISHING WORK -

1 13.4 12 mm cement plaster of mix : -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

2 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 817.03 518.55 4,23,668.68

cement : 6 fine sand).

3 13.16 6 mm cement plaster of mix : - -

Extra for providing and mixing water proofing material in cement plaster work in per bag of

proportion recommended by the manufacturers. 50KG

Distempering with 1st quality acrylic distemper (ready mixed) having VOC

content less than 50 gram/litre, of approved manufacturer and of required

shade and colour all complete to achieve even shade and colour :

New work (two or more coats) over and including water

thinnable priming coat with cement primer having VOC content

less than 50 gram/litre

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

6.00 13.47 additives of required shade: - -

New work (Two or more coats applied @ 1.43 ltr/10 sqm

i 13.47.1 over and including priming coat of exterior primer applied Sqm 817.05 171.10 1,39,796.52

7 13.50 Applying priming coat : - -

With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture of

8 13.62 required colour to give an even shade : - -

Two or more coats on new work over an under coat of suitable

shade with ordinary paint of approved brand and manufacture

13.18 Neat Cement punning Sqm 115.30 79.95 9,218.24

19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey

comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete

as per standard design.

19.32.1 With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

19.18 Supplying and fixing C.I. cover without frame for manholes :

19.18.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less

TOTAL (Carried Over to Summary of Civil Works) 23,17,701.94 0.00

L 21.00 ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/appropriate Z sections

and other sections of approved make conforming to IS: 733 and IS : 1285, fixed

with rawl plugs and screws or with fixing clips, or with expansion hold fasteners

including necessary filling up of gaps at junctions, at top, bottom and sides with

1 21.1 required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, -

straight, mitred and jointed echanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,

all complete as per architectural drawings and the directions of Engineer-in-

charge. Glazing and paneling to be paid for separately) :

a) 21.1.1 For fixed portion. -

i 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 92.64 530.90 49,184.14

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

b 21.1.2 for fixing of fittings wherever required including the cost of - -

EPDM rubber / neoprene gasket required (Fittings shall be

paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as

per the architectural drawings and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less

TOTAL (Carried Over to Summary of Civil Works) 3,33,599.32 0.00

M 22.00 WATER PROOFING 0.00

Grading roof for water proofing treatment with. Cement concrete 1:2:4 (1 cement :

1 22.14.1 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 31.97 8,042.30 2,57,104.29

Providing and filling in position bitumen mix filler of proportion 80 kg. of hot

2 5.27 bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for Cum 2.68 28,212.60 75,673.25

expansion joints.

Providing and fixing sheet covering over expansion joints with iron screw as per

design. Aluminium fluted strips 3.15 mm thick.

TOTAL (Carried Over to Summary of Civil Works) 3,38,627 0.00

N 14.00 INTERNAL ELECTRICAL WORKS -

1 D.S.R 1.10 Point Wiring in Medium Class PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/

exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, with modular type switch, modular plate, suitable size of GI box and

earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Make FRLS

PVC CU Wire::- Havells, Polycab, Rajnigandha, RR Cable. (Make of Modular switch Sockets:- Havells (ATHENA), L&T

ENGLAZE), Legrand (LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

2 D.S.R 1.11 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit, 2 way modular switch, modular plate, suitable size of GI box earthing

the point with 1.5 Sq. mm FR PVC insulated copper conductor single core cable etc as required. FRLS CU. Wire Point 2.93 1,562.00 4,581.97

Make:- Havells, Polycab, Rajnigandha, RR Cable. (Make of Modular switch Sockets:- Havells (ATHENA), L&T

ENGLAZE), Legrand (LYNCUS) , Anchor(WOODS), Schneider-(OPEL)

3 D.S.R 1.12 Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single Mtr. 176.68 334.00 59,009.45

core cable for loop earthing etc. as required.Make:- Havells, Polycab, Rajnigandha, RR Cable.

4 D.S.R 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper

condcutor, single core cable in surface/ recessed Medium Class PVC conduit as required. Make:- Havells, Polycab, - -

Rajnigandha, RR Cable.

5 D.S.R. 1.24 Supplying and fixing of following switch/ socket on the existing modular plate & switch box including connections

but excluding modular plate etc. as reqd.

1.24.4 3 pin 5/6A socket outlet Each 14.33 122.00 1,748.75

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

6 D.S.R. 1.25 Supplying and fixing Stepped type electronic fan regulator on the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

7 D.S.R. 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate

8 D.S.R. 1.27 Supply and fixing of following size/ modules, GI box along with modular base & cover plate for modular switch/

regulator in recess, including connection as required.

1.27.4 6 module (200mmx 75mm) (for 2 nos. 6A Sockets & 2no. 6A Switch) Each 5.73 402.00 2,304.91

9 D.S.R. 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including

providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular type switch, connections painting etc. Each 43.60 477.00 20,798.34

as reqd. (for Light plug point).

10 D.S.R. 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including

providing and fixing 6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16 A modular type switch, connections Each 9.67 586.00 5,664.86

painting etc. as reqd.

11 D.S.R. 1.33 Supplying & fixing of 3 pin, 5 amp Ceiling rose on the existing junction box/ wooden block including connection as

12 D.S.R. 1.34 Supplying and fixing brass batten/angle holder including connection etc. as required. Each 11.67 131.00 1,528.44

13 D.S.R. 1.35 Installation, testing and commissioning of wall bracket/Ceiling fittings of all sizes and shapes containing up to two

GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

14 D.S.R. 1.38 Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required. Each 1.93 99.00 191.41

15 D.S.R. 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types,

complete with all accessories and tube/lamp etc. directly on ceiling /wall including connections with 1,5 Sq mm Each 28.07 206.00 5,781.93

FRLS PVC insulated copper conductor, single core cable and earthing etc. as required

16 D.S.R. 1.42 Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types,

complete with all accessories and tube/lamp etc. including supplying and fixing ball and socket arrangement , 2 nos.

down rodsof 20mm diax 1.6 mm thick steel conduitup to 30 CM length, paniting and wiring the down rod and Each 67.00 471.00 31,558.41

connections with 1.5 Sq MM FRLS PVC insulated copper conductor, single core cable and earthing etc. as required.

17 D.S.R. 1.44 Installation, testing and commissioning of Ceiling Fans, including wiring the down rods of standard length (up to

30cm) with 1.5 Sq mm FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Each 39.00 213.00 8,307.32

18 D.S.R. 1.50 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,

commissioning etc. as required.

19 D.S.R 2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and

terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connection, etc. - -

as required. Make:- L&T D-Sine/ Legrand DPX³ / Schneider-NSX / Siemens - 3VL.

20 D.S.R 2.4 Supplying and fixing following way, horizontal type thee pole & neutral, sheet steel, MCCB distribution board,

415V, on surface/ recces , complete with tinned copper bus bar, neutral bar, earth bar, din bar interconnections,

powder painted including earthing etc. as required (But without MCCB/RCCB/Isolator) Make:-SIEMENS-Bitaguard,

LEGRAND-Ekinox³-, SCHNEIDER-ACTI-9, L&T-AU

2.4.3 8 way (4+24) Double door Each - 5,967.00 -

21 D.S.R 2.5 Supplying and fixing of following ways surface/ recess mounting, vartical type, 415 V, TPN MCCB/MCB distribution

board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral

link, earth bar, din bar for mounting MCCBs( but without MCCBs and incomer) as required. (Note : Vertical type - -

MCCB TPDB is normally used where 3 phase outlets are required.) Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

22 D.S.R 2.10 Supplying & fixing 5 amps to 32 amps rating 240/415 volts 10 kA, C curve Miniature Circuit Breaker suitable for

inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.

as required. (Make:-LEGRAND- DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/ L&T- AU VERSION.)

2.10.5 Triple Pole and neutral Each 1.93 1,228.00 2,374.22

23 D.S.R 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 8.67 13.00 112.67

24 D.S.R 2.14 Supplying & fixing following rating double pole (Single Phase & Neutral) 240 V, Resudual Curren Circuit Breaker

(RCCB) , having a sensitivity current uo to 300mA in the existing MCB DB complete with connections, testing and

commissioning etc. as required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/ L&T- AU

25 D.S.R 2.18 Supplying and fixing of 20A 240V, SPN Industrial Type soclket out let with 2 pole and earth, metal cenclosed plug

top along with 20A "C" Series SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for

the socket out let and complete with connections, testing and commissioning etc. as required. Make:- Legrand, L&T,

Siemens, Schneider.

26 D.S.R 2.21 Providing & fixing of M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and

vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. Each 4.33 269.00 1,165.71

27 D.S.R. EARTHING SYSTEM - -

i) 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia including accessories, and providing massonry enclosure

with cover plate having locking arragement and watering pipe etc. with charcoal/cock and salt as required. Each 0.73 6,855.00 5,010.49

ii) D.S.R. 5.9 Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below ground/surface as strip earth electrode,

including connection/ terminating with nut, bolt, spring, washer etc. as required (Jointing shall be done by Mtr 9.67 144.00 1,392.05

overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

28 LIGHTNING CONDUCTOR - -

i) D.S.R. 6.2 Providing and fixing of Lightning Conductor finial, made of 25 mm dia 300mm ling, copper tube, having single prong

at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

ii) D.S.R. 6.7 Providing and fixing G.I. Tape 20mmx3mm thick on parapat or surface of the wall for lightning conductor complete

as required. (for Horizontal Run).

iii) D.S.R. 6.8 Providing and fixing G.I. Tape 20mmx3mm thick on parapat or surface of the wall for lightning conductor complete

as required. (for Vertical Run).

iv) D.S.R. 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia including accessories, and providing massonry enclosure

with cover plate having locking arragement and watering pipe etc. with charcoal/cock and salt as required. Each 7.73 6,855.00 53,013.83

v) D.S.R. 5.9 Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below ground/surface as strip earth electrode,

including connection/ terminating with nut, bolt, spring, washer etc. as required (Jointing shall be done by Mtrs. 78.67 144.00 11,328.19

overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

29 D.S.R. 7.1 Laying of I no. PVC insulated and and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in

ground including excavation snad cushioning, protective covering and refilling the trench etc as required. - -

7.1.2 Above 35 Sq. mm. and up to 95 Sq. mm Mtr 87.67 405.00 35,505.95

30 DSR 9.1 1.1 KV Cable End Termination:-Supplying and making indoor cable end termination with brass double

compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as - -

31 DSR 14.13 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including

trenching (75 cm deep)and re-filling etc. as required.

1 MR LED LUMINAIRES LIGHTS

Note:- All LED Light fittings LM 79 and LM 80 reports need to be submitted with all accessories. Samples of alltype

LED light fixtures are to be submitted to the Engineering Incharge and each LED Light should have 100lm/W for

the approval prior to procurement of light fixtures. Make Havels, Bajaj, Philips Jaquar. Make 0f LED

Chip_Philips/Osram/Cree/Nichia.

i) Supply of 9W/10W LED Bulb (Luminous Flux- 600lm, CCT-6500K (Cool W 9/10 watt LED Bulb, B22, 6500 Khite),

CRI-80, Rated Voltage- 220V/ 240V. Beam Angle- 120 degree.

ii) Supply of surface mounted 10 watt led tube light fitting, 2 feet, Poly- carbonate body 6500K, 100 lumen / watt.

iii) Supply of 20 watt LED tube light fitting, 4 feet, IP20, 6500K, Polycarbonate Body, 100 Lumen / Watt. Each 14.33 757.00 10,851.00

iv) Supply of 40 watt, 4 feet, IP20 Surface / Suspension mounting, Extruded Aluminum housing with Lumen output of

v) Supply of 15 watt, IP20 led surface mounted down light with 100 lumen / watt, 5700K, round with Aluminum

vi) Supply of Surface mounted 10 watt, IP65 led Bulkhead, Polycarbonate body, 6500K, Each 12.67 1,992.00 25,233.00

vii) Supply, fitting, fixing and testing of building outer lighting luminaire (Street Light) aerodynamically shaped single

piece pressure die-cast Aluminum luminaire with high power LEDs as light source and electronic driver (IP66),

along with 45W LED Lamp as Energy saving as per drawing prescribed reflector and heat resistant toughened flat

glass cover, with 5ft long 40mm dia G.I. pipe with 3 Nos. of iron clamps , anchor nut bolts with double washers as per

direction of E/I or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover.

2 MR FANS & EXHAUST FANS - -

All Ceiling Fans shall be of I.S.I. Brand and of minimum 2 years of Warranty and CFM should not be less than 300.

Samples of all Fans are to be submitted to the Engineer-in- charge for the approval prior to procurement of Fans. - -

Make:- Usha, Bajaj, Havells, Crompton.

i) Supply of regular /standard model A.C ceilling fan of 1200 mm sweep with double ball bearing, down road, 2 nos.

canopies including wiring the down rods of standard length (upto 30 cm ) with 1.5 sq. mm FR PVC insulated copper Each 34.67 1,986.00 68,851.00

conductor etc.as required.

ii) Supply of 230V AC Exhaust Fan (230mm- 1400 RPM), double ball bearing (Metal Body- Light Duty) exhaust fan as

3 MR Supply, fitting fixing and testing of 63A TP/10kA, C Series MCB .(Make:-MCB-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.)

4 MR Supply, fitting fixing and testing of 63A FP/10kA, C Series MCB .(Make:-MCB-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.)

5 MR Supply, fitting, fixing and commissioning of Three Phase 4 Wire Smart kWh Meter/50 HZ/ 20A-100A (IS:- 16444)

LCD display, tamper proof type Energy Meter (Note:- Location of all Smart kWh Meter shall be out side on wall . Set 1.47 39,452.00 57,865.00

Make:- kWh Smart Meter-L&T/Conzerv /SECURE.

6 MR Supply of following size of 1.1KV XLPE / PVC Insulated / PVC sheathed (Heavy Duty) armoured electric cable with

aluminium conductor as per IS 7098 (Part-1) 1988 with upto date Amendments. Make:- As per approved Make List - -

(Make:- Havell’s, Polycab, RPG, RR Kabel, KEI)

Supply of 3.5 Core 95 Sq. mm. XLPE PVC Al. / Ar. Cable 1.1 KV mtr 58.00 1,198.00 69,487.00

TOTAL (Carried Over to Summary of Civil Works) 914033.24 437321.00

O 15.00 PLUMBING WORKS

1 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

2 17.2 Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever required.

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 3.00 6,515.55 19,547.00

3 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Each 3.00 1,648.95 4,947.00

4 17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with

1/2" BSP thread and shapes, weighing not less than 60 gms.

5 17.76 Providing and fixing PTMT urinal cock of approved quality and colour. - -

17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP

female threads weighing not less than 48 gms

6 17.28 Providing and fixing P.V.C. waste pipe for urinal including P.V.C. waste fittings

17.28.2 Flexible pipe - -

7 8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished,

of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a

chase of appropriate width with chase cutter and embedding the stone in the

chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-

charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 2.00 4,051.85 8,104.00

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

8 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45

cm length , 15 mm nominal bore Each 16.00 97.75 1,564.00

9 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,

32 mm C.P. brass waste of standard pattern, including painting of fittings and - -

brackets, cutting and making good the walls wherever require :

17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15

mm C.P. brass pillar tap

10 17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets,

C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass

trap with necessary C.P. brass unions complete, including painting of fittings

and brackets, cutting and making good the wall wherever required :

11 17.28 Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste fittings

17.28.2 Flexible pipe - -

12 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to Each 6.00 1,607.95 9,648.00

wooden cleats with C.P. brass screws and washers complete.

13 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

17.28.1 Flexible pipe - -

14 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden

cleats with CP brass screws with concealed fittings arrangement of approved - -

quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective

height of 88 mm, weighing not less than 170 gms

15 MR Providing and fixing Coat Hook of approved quality.

16 17.16a Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1 meter long

with S.S. Triangular plate to european type W.C. Of approved quality and make Each 3.00 349.15 1,048.00

as approved by engineer in charge.

17 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements, weighing not Each 1.00 111.45 112.00

less than 106 gms.

18 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : - -

18.22.1 100 mm diameter Each - 193.95 -

19 18.16 Providing and fixing brass stop cock of approved quality : - -

18.16.1 15 mm nominal bore Each - 353.25 -

20 18.51 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms. - -

20.01 18.51.1 15 mm nominal bore

21 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931 15mm nominal bore Each 16.00 574.30 9,189.00

B) WATER SUPPLY - -

1 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

2 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This - -

includes jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall - -

2.01 18.7.1 15mm nominal bore Mtr. - 286.80 -

0.01 18.7.3 25mm nominal bore Mtr. - 401.55 -

3 MR Providing and fixing brass/bronze lever operated ball valve of full flow with

stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of - -

superior quality having minimum working pressure of 16 kg/cm2.

3.01 15 mm nominal bore Each 1.00 927.00 927.00

3.02 25 mm nominal bore Each 2.00 1,662.00 3,324.00

3.03 32 mm nominal bore Each 1.00 2,570.00 2,570.00

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

4 18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make

complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

4.01 18.62.3 25 mm nominal bore, 152mm long, weighing not less than 440 gms Each 1.00 523.80 524.00

5 18.18 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete

6 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),

i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :

10 graded stone aggregate 40mm nominal size ) and inside plastering with

cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

6.01 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

7 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage

tank, ISI : 12701 marked, with cover and suitable locking arrangement and

making necessary holes for inlet, outlet and overflow pipes but without fittings Ltr. 3,733.60 11.00 41,070.00

and the base support for tank. Circular tank

C) DRAINAGE - -

Providing and fixing soil, waste and vent pipes

3.01 17.35 Providing and fixing soil, waste and vent pipes - -

17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside

3.02 17.36 Providing and filling the joints with spun yarn cement slurry and cement mortar

1:2 (1 cement: 2 fine sand) in S.C. I I C. I pipes

3.03 17.38 Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts

17.38.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside

3.04 17.39 Providing and fixing plain bend of required degree. - -

17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside

3.05 17.40 Providing and fixing heel rest sanitary bend: - -

17.40.1.2 Sand cast iron S&S as per IS:3989 Each 1.00 548.70 549.00

3.06 17.43 Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

a) 17.43.1.2 100x100x100 mm Sand cast iron S&S as per IS - 3989 Each 1.00 925.70 926.00

3.07 17.44 Providing and fixing single equal plain junction of required degree : - -

17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per

3.08 17.55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts

a) 17.55.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 1.00 683.85 684.00

3.09 17.56 Providing and fixing terminal guard. - -

17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per

3.10 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. - -

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 1.00 432.05 433.00

3.11 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

3.12 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged

grating with or without vent arm complete, including cost of cutting and making - -

good the walls and floors :

a) 17.60.1.3 100 mm inlet and 100 mm outlet Hubless centrifugally cast (spun) iron epoxy

coated inside & outside as per IS:15905

a) 17.60.2.3 100 mm inlet and 75 mm outlet Hubless centrifugally cast (spun) iron epoxy

coated inside & outside as per IS:15905

3.11 17.65 Painting sand cast iron / centrifugally cast (spun ) iron soil, waste vent pipes and

fittings with paint of any color such as chocolate grey ,or buff etc .over a coat of - -

primer (of approved quality ) for new work .

a) 17.65.1 100 mm diameter pipe Metre 9.00 82.80 746.00

Digitally signed by SILKI

Total DSR-2023 NDSR Amount

Sl. No. DSR-2023 DESCRIPTION UNIT DSR AMT. (Rs.)

Quantity RATE (Rs.) (Rs.)

3.12 17.77 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/

cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of

specified shape, projecting 75 mm outside the wall surface and fixed on wall with

4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick

wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the

already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of

specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts,

& washers of size 25x6 mm, one bolts on each side of the pipe.

17.77.2 Total bracket length 810 mm of approved shape and design

(for two 100 mm dia pipes)

3.13 MR Providing and fixing cast brass Floor Clean Out plug 100mm with suitable insert

keys for opening, male threaded joint with G.I. socket lead caulked to soil pipe /

waste pipe of C.I. and C.I.(LA) pipe as required complete as per instruction of the

Engineer in charge.

D) RAIN WATER WORK - -

1 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

2 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A including jointing with seal ring conforming to IS : 5382 leaving

10 mm gap for thermal expansion.

2.01 12.42.2 Single Push fit coupler - -

2.02 12.42.3 Single Tee with door - -

3 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15

cm diameter and weighing not less than 440 grams.

4 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to

unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood

plugs, screwed with M.S. screws of required length, including cutting brick

work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete. - -

5 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm Each 3.00 298.25 895.00

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the outlet complete.

TOTAL (Carried Over to Summary of Civil Works) - 2,13,964 8,164

Digitally signed by SILKI