WELCOME MAINTENANCE AND REPAIR / REPLACEMENT OF TILING, SANITARY FITTING WORK AND OTHER E/R AND E/M MISC WORK OFFR ACCN AT AGE B/R II UNDER GE KAMPTEE

Amount

M & L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and and applying one coat of acrylic distemper , white or tinted complete all as directed.

Preparation of old surfaces by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one or more coat of white putty on wall surfaces all as specified and directed. (Make : Birla, JK)

All as per ser item No 1 above but applying two coats acrylic distemper, all as specified and directed.

All as per ser item No 1 above but on ceiling complete all as spd and directed.

M & L for complete removal of existing treatment of old plastered surface of wall and applying one or more coat to make the entire smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as spd and directed.(Make : Birla, JK , Asian & Berger)

All as per ser item No 5 above but applying one coat of white wash on walls, all as specified and directed.

All as item no. 5 above but applying one coat of white wash on ceiling surface all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as spd and directed.

M & L for preparation of new plastered surface of wall and applying one or more coat to make the entire smooth and applying two coats of acrylic distemper with mechanical applicator of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as spd and directed. (Make : Birla, JK , Asian & Berger)

M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash.

M & L preparation of new plastered surfaces of wall and applying three coats of white wash complete all as spd.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified.

M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed.

All as per Ser item No 13 above but applying two coat of synthetic enamel paint white or tinted complete all as directed.

M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed.

M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer

M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spd and directed.

Demolition of cement concrete of any description and any position and removing the rubbish from the work site all as specified and directed.

M&L PCC type C2, 1:3:6(40mm graded aggregate) as in filling and mass concrete complete all as spd and directed.

M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed.

M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels of full width @ maximum 3mtr interval, finished even and fair all as spd . Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 gde and three part of sand ( all by weight) complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

M&L for coloured joints free non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

M&L for 450x300x7 mm thick joints free glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

S & F Dark shade /Double charged/ultracharged Vetrified Ceremic tiles 7 to 10mm thick (Square/Rectangular) polished , area of each tiles exceeding 0.42 but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match over 15mm thick screed in cement mortar( 1:4) directed at site complete all as specified and directed.

All as per Ser item No 27 but as in skirting with 10mm thick rendering in CM (1:4) complete all as directed.

S&F granite slab of 20mm thick in steps,cooking platforms,and like over 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and grinding and polishing and rounding /moulding the edges Complete all as specified and directed.

Taking down cement plaster from brick/concrets surfaces including raking out joints, hacking for key and scrubbing down with water etc.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and fair without using extra cement Complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and fair without using extra cement Complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:3 on ceiling surface finished even and fair without using extra cement Complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles Complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilatiate demolition)

M/L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in cement mortar 1:4 complete with joints to match complete all as directed.

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 4 mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as spd and directed.

S&F 5.5 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete all as specified and directed.

S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares but exc 0.50 sqm in each pane complete all as spd and directed.

S&F toughned glass 12 mm thick as in hinged doors, partiotion automatic doors and similar work incl cutting to shape ,drilling holes reqd complete all as specified and directed.

Dismantling old structural steel work including doors, gates,steel railing but excluding framed truss etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and complete all as spd and directed.

Taking down steel water tubing and connections including cleaning for re-fixing or removal to store of 20mm bore pipe complete all as specified and directed.

All as per item No 46 above but of 15mm bore pipe complete all as specified and directed.

All as per item No 46 above but of 25mm bore pipe complete all as specified and directed.

Taking down existing water proofing/Koolkoat treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting chasing in walls etc complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples, fixed as in repairs complete all as specified and directed.

S&F Galvanized mild steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples all as specified.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc complete, size of frame 105x60mm complete all as specified.

All as per item No 59 above but size of frame 125x60mm complete all as specified and directed.

M & L PCC type C1 1:3:6 (20mm graded aggregate) as in filling of hollow portion of Pressed steel chowkat complete all as specified and directed.

All as per item no.61 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 35 mm Factory made, Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of 35 mm thick shutters.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton door shutters of 10 panels, factory made, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a)(larger size to be provided) complete all as specified & directed

All as per item no.08081 but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

S&F steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

All as per item No 67 above but without glazing bar but without peg stay complete all as spd and directed.

S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron)

S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

M&L aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M & L for welding in repairs to metal n exc 6 mm thick and length exc 2.5 cm and n exc 5 cm

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, and similar small conforming to Fe 410-0 or Fe 310-0. complete all as spd and directed.

M&L PCC 1:2:4 type B1 ( using 20mm graded aggregate) as in bed blocks for hold fasts including necessary from work, PCC benching, copings etc. complete all as spd and directed.

Supply only Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as spd and directed.

S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as spd and directed.

S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm complete all as spd and directed.

S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section complete all as spd and directed.

S&F aluminium ,anodized 150 mm long barrel tower bolts of extruded section complete all as spd and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete.

S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm complete all as spd and directed.

S&F continuos (Piano) hinges , miled steel, bright finish or electro galvanised of width 30mm fixed in repair complete all as spd and directed.

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size fixed in repair complete all as spd and directed.

S&F extruded aluminium alloy handles,febricated type,anodised of 75mm size fixed in repair complete all as spd and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of 75mm long fixed in repair complete all as spd and directed.

S& F in repair 18 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified all as directed.

S&F 6 mm thick teak wood lipping on block board fixed with nails complete all as spd & directed.

S & F for stainless steel, ball bearing type,Size 14"x1.5" drawer runner for smooth functioning of drawer in all as spd complete all as spd & directed. ( Make : HETTICH,EBCO,GODREJ

S&F mica white colour 0.5 mm thick fixed with glue complete all as spd & directed. Make : GREENLAM, ARCHIDPLY, ROYAL TOUCH

S&F mica brown colour 0.8 mm thick fixed with glue complete all as spd & directed. Make : GREENLAM, ARCHIDPLY, ROYAL TOUCH

S&F PVC bedding 18/19 mm width 0.8mm thick fixed with pvc edge bending tape with necessary glue complete all as spd & directed.Make : PROPOND

S&F zero degree concealed hinge complete all as spd & directed. Make : ALBIHARI, EBCO.

S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished complete all as spd and directed.

S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops ,rollers etc complete all as spd and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe all as specifed.

S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for union complete all as spd and directed.

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fency type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified complete all as spd and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed complete all as spd and directed.

S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6" long made to shape complete all as spd and directed.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as spd and directed.

S & F chromium plated pillar tap swan nack for wash hand basin/sink of copper alloy with long shank inlets suitable for 15 mm bore connections complete all as spd and directed.

S & Ffor 15mm dia CP wall mixer 3 in 1 for mixing hot and cold with L bend (provision for over head shower) screwd down for iron pipe complete all as specified.

S & F for any type of spindle in wall mixer , basin mixer, swan neck pillar tap etc complete all as specified

S&F CP Sink with mixture with regular spout hot and cold arrangement long shank suitable for GI tubing complete all as specified and directed.

S & F 15 mm bore CP nozzle for RO connection complete complete all as spd and directed.

S&F PVC Connection 15mm size with PTMT nuts of length 450mm long complete all as spd and directed.

S&F central hole basin mixer(hot & cold) complete all as spd and directed.

S & F 32 mm dia waste coupling PTMT (half or full threaded) (minimum wt-45 gms) fixed in repairs complete all as spd and directed.

S & F 32 mm dia PVC waste pipe fixed in repairs complete all as spd and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC bedding and connection pipes (excluding flusihing cistern but including CP brass flushing pipe) (rate also including for taking out unhygienic old WC and its removal from the site) complete all as spd and directed.

S&F in repars vitreous china wash down water closet pan (pedestal pattern), white, complete all as specified and directed.

S & F in repair chromium plated health faucet 1.00 mtr tube and hook 15mm bore with complete all as spd and directed.

S & F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all as spd and directed.

S&F Chromium plated toilet paper holder fixed to wall with plugs and brass chromium plated screws complete all as spd and directed.

S & F in repairs seat and cover (white or colour as approved) for pedestal pan and mild steel chromium plated or aluminised hinging device complete all as spd and directed.

S & F PVC cabinet mirror (622 x 422)mm box type in repairs complete all as spd and directed.

S&F Brass CP towel rail complete all as spd and directed.

S&F Brass CP towel rack complete all as spd and directed.

S&F Grating doom 125/100mm dia.(Min.weight 25gms) of PTMT fixed in repair complete all as spd and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC connection wih brass nut on both ends and CP Brass flush pipe.complete all as spd and directed.

Supply and fixed in repair Vitreous China wash basin white flat back size 550x400 mm including waste pipe of size 32mm bars, CP waste coupling 32mm, PVC connection pipe 450mm long with a pair of brass nuts & PVC washers on MS angle iron 25x25x3mm thick brackets complete all as spd and directed.

S & F in repair half stall 345 x 320 x 560 mm complete all as spd and directed.

S&F sinks with drainage board made of stainless steel 1.00mm thick in kitchen with plugs, washers and waste, incl bedding in cement mortar on wall incl fixing cantilever brackets and connecting union to pipe overall size 914 mm x460 mmx203mm , bowl size 405 mm x354 mmx203 mm complete all as spd.

S&F kitchen rack plate made of stainless steel 1.00mm thick in kitchen with screws, incl complete all accessories overall size 24" x 30" x 10 " complete all as spd.

S&F ball valves high pressure of Brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight-210 gms)

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity.ISI Markedcomplete all as spd and directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity.ISI Marked. complete all as spd and directed.

S&F in repairs CP soap dish with glass complete all as spd and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as spd and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as spd and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia complete all as spd and directed.

S&F PVC (SWR) bends/shoes any radius of 110mm dia complete all as spd and directed.

S&F PVC (SWR) bends any radius provided with access door of 110mm dia complete all as spd and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as spd and directed.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door complete all as spd and directed.

S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door complete all as spd and directed.

S&F PVC (SWR) vent cowl of 75mm dia complete all as spd and directed.

S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe complete all as spd and directed.

Preparation of surfaces and Providing and applying IWL make Koolkoat one coat primer IWL Koolkoat diluted wth water in mix ratio of 2:1 is used as primer coat allow to dry for 2-3 hrs over a primer two coat of undiluted IWL Koolkoat. Stir well for homogeneity in interval of 4-5 hrs after first coat application and then apply without thinning. Both 1st and 2nd cots applied to attend DFT around 125-150 microns complete all as spd and directed.`

M&L for Grinding and polishing with bee wax to terrazzo topping/ Kota Stone flooring complete all as specified.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling or surface of wall/ceiling as directed including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 152 above but One ceiling /exhaust fan point controlled by one switch and regulator

As per item No 152 above but One 3 pin 5 amp socket out point on the same board with other switches.

As per item No 152 above but One 3 pin 5 amps socket out let point on independent board but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm

As per item No 152 above but One bell/buzzer point controlled by one bell push.

As per item No 152 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x1.5 Sqmm with earth wire of 1x1.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

As per item No 159 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm.

As per item No 159 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps Make : Havells, Legrand, Crabtree

S&F Bell ding dong, AC 230 volts, single phase

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting.

Supply and fix Modular switch one way 6A, 1 module Make : Havells, Legrand, Crabtree

Supply and fix Modular switch one way 16A, 1 module Make : Havells, Legrand, Crabtree

Supply and fix Modular bell push 6A, 1 module Make :Havells, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module Make : Havells, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module Make : Havells, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module Make : Havells, Legrand, Crabtree

Supply and fix piano type switch one way 6A, Make : Anchor Roma, Legrand, Crabtree

Supply and fix piano typeswitch one way 16A, 230 V as per sample complete

Supply and fix piano type bell push 6A, single phase as per sample complete

Supply and fix flush type Socket 6A 2/3 pin combined single phase as per sample complete

Supply & Fix flush type Socket 6A/ 16A 5 pin combined single phase as per sample complete

Supply and fixflush type Fan step regulator,120 watt switch/socket type as per sample complete

Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed.

Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed Make :- Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as directed by the Engineer-in-Charge. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply & fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz, complete all as directed by the Engineer-in-Charge. Make: Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as directed by the Engineer-in-Charge. Make : Bajaj/ Syska/ Wipro/ Jaquar.

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as directed by the Engineer-in-Charge. Make : Bajaj/ Syska/ Wipro/ Jaquar.

S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Make: Bajaj/ CromptonOrient/ Wipro/ Jaquar.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as directed by the Engineer-in-Charge. Make : Bajaj/ crompton/Phuilips

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for: Modular metal flush box with modular cover plate with frame 3 module. Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item no 185 but Modular metal flush box with modular cover plate with frame 4 module.

All as per item no 185 but Modular metal flush box with modular cover plate with frame 6 module.

All as per item no 185 but Modular metal flush box with modular cover plate with frame 8 module.

All as per item no 185 but Modular metal flush box with modular cover plate with frame 12 module.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as directed by the Engineer-in-Charge. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as directed by the Engineer-in-Charge. MakeLegrand/ L&T/ Havells.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door.Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as directed by the Engineer-in-Charge. Make-Legrand/ L&T/ Havells.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as directed by the Engineer-in-Charge. MakeLegrand/ L&T/ Havells.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA. MakeLegrand/ L&T/ Havells.

Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 44,581.00]

M/s Jagdish Staioners and General Stores (BID ID -3309961)

M/s Rahul Traders (BID ID -3310113)

M/s Shrangi Rishi Construction (BID ID -3304036)