Construction of New Public Distribution Shop at Athirikuppam village in Peperiyankuppam Panchayat, Panruti block (500 Cards)

Amount

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation. For Columns

Supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels, Staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.) For Columns upto grade beam

Lintel : D2 sides, Bottom D2, RS1, Bottom, RS, Bottom, Window sides, Bottom, Floor slab bottom, Cantiliver slab bottom, Roof slab sides, Roof beam, Sunshade W, Sunshade W sides, Sunshade D2, Sunshade D2 sides

Rainforcement Cement Concrete 1:11/2:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams, etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Sunshade W, Sunshade D2, lintel D1, D2, Rs1, Rs1, W, Roof Slab, Cantiliver, Roof beam

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

Super structure : Front wall, Rear wall, Side wall, Store wall, Toilet wall, Office wall, Parapet wall

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS HBG metal to40 mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Floor finishing with Ceramic tiles of size 305x305x6mm colour tiles with design laid in cement mortar 1:3 using 20 mm thick and pointing with same colour cement of 3 kg including cost and conveyance of all materials to site and all labour charges etc complete.

Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:3, 20mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing of cuddapah slab including all charges etc complete.

Supply and fixing of Water closet wit "P"-trap

Supply and fixing of Wash basin

Supply and fixing of CP screw down tap

PVC 4'' dia pipe

Rcc precast rings

Rcc precast cover slab

Supply of steel doors and windows Rolling Shutter 1.80 x 2.40 m

Rolling Shutter 2.1 x 2.40 m

door 1.00 x 2.10 m

door 0.9 x 2.10 m

door 0.75 x 1.80 m

Ventilator 0.90 x 0.60 m

Window W 1.00 x 1.30 m

Jolly 2.10 x 2.00 m

Painting two coat with approved quality and interior Emulsion paint over the plastered surface including cost and all other charges etc.,

Painting two coat with approved quality and exterior Emulsion paint over the plastered surface including cost and all other charges etc.,

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing following electrical arrangement a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

b)Supply and fixing of water tight Bulk head fitting with guard suitable for incandascent bulb

c)Supply and fixing CFL light fittng and all labor charges tc complete

d)Supply and fixing of single Type street light Flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light

e)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains

f)Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main

g)Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main

h)Supplying and fixing of 1200mm(40")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

Balasubramaniyan R (BID ID -1522819)