Providing and fixing of chain link fencing at Nidder III area of Nyoma Forest Range for the year 2025-26 under the scheme CAMPA 52d

Amount

Earth work in excavation by mechanical means (hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm 0n plan)including disposal of excavated earth, lead up to 50m and lift upto 1.5m All kind of soil

Providing and laying in cement concrete of specified grade include. Curing but excluding the cost of centering and shuttering. All work upto plinth level of 1:3:6 ( 1 cement, 3 coarse sand, stone aggregate of 20mm nominal size crushed stone aggregate) in blocks.

Providing and fixing of Angle Iron Fence Post made of MS angles (50 x 50 x 6mm) in built up sections and framed works including. Cutting housing single section 2.14 Mtr long with 15cm foot/ toe at the bottom with whole drilled and top bends

Centering and shuttering including strutting, propping & removal of form for: Foundations, footings bases of columns etc for mass concrete.

Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh sizes 7.62m×1.52 roll (4’’×4’’mesh size) including strengthening/binding with nut bolt and washer as required complete as per the direction of in charge.

Providing and fixing MS iron sheet 3mm of required pattern for sign board for main gate entrance with one cost of steel primer and two coats of paint including department logo and writing etc with cement concrete, sezing (6' X 4') with 7'00 legs (50 x 50 x 6mm) = 1 nos including all jobs as diredted by incharge.

Supply at site binding iron strip (patti) for binding chain link to the angle iron post of required size with drilled holes up to 10mm in dia for complete job. Flat size: 40mm×6mm

Providing and installation of fabric iron Gates 6’ x 12’= 1 Nos with angle iron Framed including. Master pillars (6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely.

Providing and installation of febric iron Gates 4’ x 6’= 1 Nos with angle iron Framed including. Master pillars (6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely

Providing and laying and strengthening of barbed wire at top of the fence post including all jobs.

Carriage of sand and stone agg. by Mechanical Transport from source to working site for a distance of 10.00 Km. Sand and Stone agg.

Carriage of bags of cement from Leh to Korzok by an average of 180 km mechanical transport including loading and unloading etc.

Mechanical carriage of fencing material from Leh to Korzok (distance 180km)

M/S JARA STEEL FABRICATION (BID ID -172169)

MIRZA HUSSAIN (BID ID -172234)

Aggxima Entrprise (BID ID -172220)

M/S SD FABRICATION (BID ID -172290)

M/S KHARU FABRICATION (BID ID -172296)

M/S PADMA WANGTAK (BID ID -172267)

SP.FABRICATION (BID ID -172126)

M/S TSERING ANGDUS GOVT CONTRACTOR (BID ID -172295)

M/S TSERING DORJAI GOVT CONTRACTOR (BID ID -172294)

Khachu Enterprises (BID ID -172198)

M/S LOBZANG STANBA (BID ID -172288)

M/S MH ENETERPRISES (BID ID -172304)