CERTAIN REPAIR TO ROOF FALSE CEILING VALLEY GUTTER FLOORING TILLING AND PLUMBING WORKS AND ALLIED WORKS IN 512 ABWS UNDER GE CENTRAL KHADKI

Amount

Dismantling of asbestos cement (corrugated or semi corrugated) sheets/fibre sheet in roof covering complete all as specified

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts

M&L asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or screws J-type or cranked hook bolts

S&F,in repair, asbestos cement north light curves to suit asbestos cement sheets, fixed with L-type or J-type or cranked hook bolts,all as per specified and directed by Engr-in-charge

S&F 2 mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts on roof, wall etc complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

S&F in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including dismantling, complete all as specified by Engr-in-Charge

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings

S & F roof tiles, Mangalore pattern, inter locking at side joints laid dry

Ditto as per ser No 11 above except tiles

S & F ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6

Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete

S&F second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm

As per item No 15 but except battens complete,fixing only

S&F in repair E-board 'Everest' or equivalent make as approved by GE of size 600x600x4mm thick white prelaminated sett embosed reinforced designed ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed..

M & L for plain, galvanised mild steel sheeting in ridges hips valley gutters drip and straight flashing (length and girth as fixed) by using 1.0mm thick sheet grade of zinc coating @275 Gms/Sqm both sides and welded or soldered joints including necessary fittings and including dismantling of plain or corrugated steel sheeting any gauge thickness (including Nainital or similar pattern) as in roof covering/vally gutters complete all as specified and as directed by Engineer-in-Charge. Note:-As above

M&L for PCC surface preparation by cleaning the surface from any moisture dirt,wax grease,flux residue and all other contaminants, applying two coats of AS 2045 Epoxy primer on PCC surface, supplying and applying, two component dielectric coating on the prepared surface having electric strength not less than 32.2 KV/MM, Dielectric dissipation not less than 0.074, dielectric constant not less than 10.93K. flash point above 52 Degree Celcius, a film of thickness 3 mm is a achieved. Note:- (a) The contractor has to produce a certificate from a Govt approved lab certifying all the characteristic and properties of coating as stated above. (b)The contractor has to produced the test reports of the coatings applied at all the location to the complete satisfaction of Engr-in-Charge. (c) The coated rate is deemed to be inclusive of materials required for surface perparation.

S&F in repair Steel rolling shutters, 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or nmanual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0,complete all as specified and directed.

Taking down Refixing in the same opening after repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type/push pull or manual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0,complete all as specified and directed.

S & F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and as directed.

Demolition of Brickwork or stone boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for Brickwork with fly ashbricks, straight or curved on plan exc 6m mean radius, Modular bricks in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L Rendering/plastering, 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete sur face of wall complete all as specified

M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with sagol complete all as spd and directed by Engr-in-Charge.

M & L for preparation of new plasterd or unplastered surfaces of walls/ceiling and applying two coat of oil bound distemper including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC.

S&F in repair vitreous china wash basin white flat back size 580x450 mm including,pillar tap, 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets.

S & F in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by EIC.

S & F in repair, 20mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors,including taking down, complete all as specified and directed by EIC.

S & F in repair,40mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors,including taking down, complete all as specified and directed by EIC.

S & F in repair,110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,including bend, Y etc, laid in trenches or in floors

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S & F in repair bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC.

S & F in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.

S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc all as specified and directed.

M & L for preparing new or previously untreated wooden/steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

S&F 3 layered rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

S&F 3 layered rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.

Demolition of cement concrete of any description and in any position incl removing of debries all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floors/base course/hardstanding complete all as specified and as directed.

Note:- (a) Work to be carried out in bldgs/Sheds height of 15-20Mtr (Approximately) (b) Rate quoted by contractor shall be inclusive of dismantling and refixing of AC/GI (corrugated semi corrugated etc) sheets, Wired Figure Glass Light Ventilation at Valley gutters area in roof coverings which are mentioned. (c) The coated rate is deemed to be inclusive of materials required for perparation. Safety factors to be ensured while working at heights. (d) Contractor has to deploy a Engineering qualified Super viser and all inclusive in CA amounts.

Emerald Construction

M/S KISHAN CONSTRUCTION

VP DEVELOPERS AND CONTRACTOR

S M MISHRA

JP ENTERPRISES

M/s S S Enterprises

S.R.M.K Enterprises