AMRUT 2 0 2023 2024 Providing Park at Ward No 01 Survey No 391 392 Housing Unit in Keeranur Town Panchayat Pudukkottai District

Amount

Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS 23 & 24, V, VI (S2), VII, 9,10

Plain Cement Concrete of mix 1 : 4 : 8 (One part of Cement four part of sand eight part of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and errecting steel centering including necessary supports for plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floors Complying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII

Below Ground Level

Column

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing,etc., complete complying with standard specification 31 & Similar to 31C V, VI (S5) VII

Compound Wall

Plastering in Cement Mortor 1:5 Mix (one part of Cement,, five part of sand)12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(Using Vibrator) TNDSS NO: 30 V, VI (S3), VII-3.

Up to Basement

Below Ground Level

Above Ground Level

Supplying ribbed tor steel rods including cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works. as per the design given including cost of steel and binding wire also in all floors as per standard specification. SS86 & 86A, V, VI (S3) (S6) VII.

Supply and fixing of Gate and M.S Grills for Windows, with one coat of Red oxide Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel Door Complete as Directed by the Departmental Officer.

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works ) ( TNSS NO or NBC No 61 V VI (54) 3)

Painting two coats over the new wood work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm

Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Vibrated Plain Cement Concrete 1: 2 :4 (One Cement two sand four aggregate) using 20 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers 30 V, VI (S5) VII & 13

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the dpeartmetal officers

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia.The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers.

Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., handrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers.

Supply and fixing of LEG Press materials of 4x4 inch square tube 3mm thick post 7.5 feet post with 3inch MS ball set and 1.5inch pipe 2 feet and 16kg MS Sheet with base platform finishing with flooring etc including cost of all materials all labour charges etc., complete

Supply and fixing of Standing Twister materials of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc including cost of all materials all labour charges etc., complete

Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey etc.,Complete

Supply and Fixing of 6 metre length Single Bracket pole with Base Plate (250x250x6mm) 76.10 mm OD x3.65 mm thick x4000mm Length etc.Complete.

Supply of 25 W LED Street Light Fitting with LED etc Complete

Earthing as per PWD standard specification with on earth electrode of 2m class 'B' pipe of dia not less than 32mm complete. Brass cable event for sutiable armoured LTUG cable with earth connection sutiable of 4x16mm etc complete

Supply and erection of 4x16 sqmm UG copper cable,including cost and conveyance of all materials to all materials to site and labour charges etc complete…

Suuplying and fixing of Three seater bench made of high quality materials Providing single seater double polish finish black Granite sitting single round bench ( stool type) 100 thick 45cm dia granite slab for bench slab and 150mm dia on middile and 30cm on end posts including cost and conveyance and fixing in position etc., complete

Conducting Geo Physical survey test Reports

Drilling of 150mm dia borewell in hard rock area anywhere in Pudukkottai District in the place shown by the officers including transportation of Rig and supporting vehicle from one place to another place including fuel, labour, etc completed

a.Loose Soil

b.Hard rock

Supply and errection of 150mm casing pipe as per IS 12818/1992 including all labour charges etc., complete.

Borecap using M.S. Flat of size 10mm x3mm M.S. Sheet on top with Bolting arrangements for securing the cap in position (Bore caps with MS Couplings) need not be made.

Construction of pedestal tank support wall size 1.40m dia x 0.60m height of brick work in CM 1:5 using country brick of size 8 3/4 x 4 1/4 x 2 1/4 as per TWAD Board type design including painting two coats and name board lettering etc., complete

Supply, delivery and fixing of HDPE Tank with ISI marking (1000 liter capacity) including transportation, fixing etc., complete

Construction of pedestal for K150K with size 0.75 x 0.45 x 1.80 in an using bricks of size 8 3/4 x 4 3/4 x 2 1/4 as per TWAD Board type design including painting etc., complete.

Supply and delivery of MS KISOK box size 0.75 x 0.45 x0.75 for fixing meter board, switch board with lock and key arrangements including painting two coats

Supply and delivery single phase of the submersible pumpset 20LPM x 125m head of 1.5 HP including control pannel board etc., complete.

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single hase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection,Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and delivery of 2.50 sqmm pvc insulated and sheathed 3 cre flat coper cable conforming to IS -694/1990

Supply and delivery of 40mm UPVC - Column pipe for Submersible pumpset to a bore well class-5 (1 MPa or 10 Kg/Annexure VI Sno.177 D-(d)cm2 pressure ) Pressure)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

pply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and fixing of6 Amps TPN Metal Clad Switch with Re-wirable Fuse Units

Earthing as per standard specification

Cost of Materials and labour charges for Mini power Pump works (as per list)

20mm GI Coupling( Heavy Duty)

32mm H nipple ( Heavy Duty)

20mm H nipple ( Heavy Duty)

32mm GI Elbow ( Heavy Duty)

32mm GI union ( Heavy Duty)

32mm GM weel valve ( Heavy Duty)

20mm tap ( Heavy Duty)

20mm GI pipe ( Heavy Duty)

32mm GI pipe ( Heavy Duty)

32 mm PVC pipe( Heavy Duty)

32 mm PVC MTA ( Heavy Duty)

EB Service Connection charge

Supply and fixing of Hose connection 32mm SS Color

Supply and fixing of 32mm MS clamp set

Cost and supply of 12mm nylon rope

Labour charges for the erection of submersible pumpsetin borewell/openwell including fixing and jointingsubmersible cable with proper clamps upto the starter torequired depth and also fixing of riser pipes to therequired depth valves erection clamps, pressure gaugesupto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lampscapacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IErules etc., complete and testing the pumpset and trailrun for 10 days

Provision for Rain Water Harvesting 1.00mx100x 1.00m filling with 40mm HBG Metal

Earth work excavation and depositing on bank withinitial lead of 10 m and lift of 2 M in narrow trencheshaving bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following typ and, silt or other loose soil, wet sand or silt not underwater light black cotton soil, sandy loam and ordinarysoil.SS20B

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement

Using of 32mm 10Ksc rigid PVC Pipes, lowering to trenches and laying to proper grade and alignment

Granolithic Flooring 0.25cum thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications