Repair/Renovation of Chain-link fencing by way of raising height and providing concertina wire on the top at Tanday Rescue Centre, Udhampur

Amount

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Angle Iron 50x50x6mm, Angle Iron 40x40x6mm & Flat Iron 40x6mm).

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with 5 horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 meters (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per meter cost of total length of barbed wire used with G.I. barbed wire .

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S. angle, C.C. blocks shall be paid separately).

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new steel works. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Engage 2 Blacksmith for 16 Days for cutting angels and making holes.

SURINDER SINGH JAMWAL

M/S Narsehain Engg and Builders Pvt

Dev Raj Sambyal