Restoration work and demarcation of canal land of Baghla Pump Canal from km 0.000 to km 11.200

Amount

E/W in filling for restoration Baghla Pump Canal including proper compaction in layers and dressing with all lead, lift, T&P in all type of soil as per direction of engineer-in-charge.

Correcting internal section of baghla pump canal with earth filled new EC bags including stitching with cost of sutli, bags and filling materials with placing in position at engineer as per direction of engineer-in-charge.

E/W in cutting in inner section of tail escape of Baghla Pump Canal from km 11.200 to km 12.800 including proper compaction in layers and dressing with all lead, lift, T&P in all type of soil as per direction of engineer-in-charge.

Providing, fixing, painting and writing on boundary pillar, as per design provided in drawing, on both side of canal @ 200 m, including all cost of material, labour T&P required for completion of work as per direction of engineer-in-charge.

Laying brick soling layer on prepared sub-grade with brick on edge according to lines, graded and cross section shown on the drawing including filling joints with sand with all lead, lift, T&P in all type of soil as per direction of engineer-in-charge.

Repair of Damaged/cracked CC Lining with 1:2:4 CC of BPC Between Km 0.00 to 1.00, Km 4.800 to 5.200, km 5.685 to 6.255 & km 6.400 to 7.000 with all lead & lift including labour , material ,T&P etc. as per direction of engineer in charge

Earth Work in excavation in all type of soil as per direction of engineer-in-charge.

Preparation of Sub-grade for Lining excluding cost of earth work with all lead, lift, T&P in all type of soil as per direction of engineer-in-charge.

Dismantling of old C.R.Stone masonry including stacking of materials within a distance of 60 m as per direction of engineer in-charge

Supply and laying local sand below in foundation C.C. including cost of all materials labour T&P etc as per direction of engineer in-charge

Supply and laying of LDPE Film 200 micron including cost of all materials labour T&P etc. as per direction of engineer in charge.

Laying C.C. 1:3:6 in foundation & floor including cost of all materials labours T&P etc. as per direction of engineer in charge.

C.R.S. Masonary with 1:3 C.M. including cost of material labour T&P etc.as per direction of engineer in charge.

C.R.S. Masonary with old stone in 1:3 C.M. including cost of material labour T&P etc.as per direction of engineer in charge.

20 mm deep struck cement pointing on stone masonary with 1:2 C. M including cost of all materials, labours T&P etc. as per direction of engineer in charge.

Dismantling of RCC slab concrete including stacking of dismantled materials within 60m as per direction of engineer –in-charge.

Centering and shuttering of R.C.C. work including cost of all labour, material,T&P etc.as per direction of engineer in charge.

Reinforcement of RCC work C including cost of steel, cutting, bending, placing in postion & binding with 16 gauge binding wire including cost of all labour, material, T&P etc.as per direction of engineer in charge.

Laying C.C. (1:1.5:3) one part cement , 1.5 part coarse sand, three part A- 20 graded stone grit including all type of materials, labour ,T&P etc. required for proper completion of work as per direction of engineer-in-charge.

Laying CC (1:2:4) one part cement , 2 part coarse sand, 4 part A- 20 graded stone grit including all type of materials, labour ,T&P etc. required for proper completion of work as per direction of engineer-in-charge.

Providing and fixing screen on inlet of canal syphon of BPC at km 0.842, 2.565, 4.970 including all type of materials, labour ,T&P etc. required for proper completion of work as per direction of engineer-in-charge.

Providing and laying non-pressure NP4 class 300 mm dia R.C.C. pipes in proper alignment as per direction of engineer in charge

Providing and engaging beldar required for proper completion of work as per direction of engineer-in-charge.

Dismantling of cement base concrete including stacking of dismantled materials within 60m as per direction of engineer –in-charge.

Supply and laying HDPE Pipe 140mm dia as per direction of engineer in charge

Supply and laying HDPE Pipe 120mm dia as per direction of engineer in charge

Dismantling damaged hume pipe & stacking of dismentaled material with all lead &lift including labour ,material ,T&P etc.as per direction of engineer in charge.

E/W in filling for making diversion/approach including all lead &lift etc . including cost of all labour,materail,T&P etc.for proper completion of work as per direction of engineer in charge

E/W in Dismentalling diversion/aproach including all lead &lift etc . including cost of all labour,materail,T&P etc.for proper completion of work as per direction of engineer in charge.

E/W in strengthening of banks of canal/gul. including cost of all labour,T&P etc.for proper completion of work as per direction of engineer in charge.

Supplying and Fixing of steel head regulator gate size 1.00 x 1.12 M. including cost of all material, labour, and T& P etc. required for proper completion of work as per direction of engineer-in-charge.

NIKHIL CONSTRUCTION (BID ID -4980077)

RAJ BAHADUR SINGH (BID ID -4980057)

m/s satish chandra jaiswal (BID ID -4980155)