Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC A 26TH FLOOR PLATINUM PLAZA DISTRICT BHOPAL M P | BHOPAL | BHOPAL | MADHYA PRADESH | 462001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹37.4 L+₹1.5 L (4.24%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L2 | Rejected-Finance Being other than lowest |
Tender Value
₹47.8 L
EMD Value
₹95,520
Closing Date
17 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PROVN OF CERTAIN REVENUE AND MINOR WORKS IN THE AREA OF AGE B/R-I, AGE B/R-II AND AGE E/M UNDER GE (EAST) DELHI CANTT-10
2023_MES_622993_1
GE/DE-82/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹95,520
Yes
25 Jan 2024
13 Oct 2023
20 Nov 2023
13 Oct 2023
17 Nov 2023
3 Nov 2023
Amount
Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft / loose soil
M&L PCC(1:4:8) type D-2(using 40mm graded stone agg.) as in foundations, filling and mass concrete.
M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
S&F mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E- 250) quality-A
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conforming to Fe 410w grade-250) quality 'B' complete.
S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.
M&L for prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including rubbish off the premises complete all as specified and directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L 60 mm thick Coloured cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade complete all as specified and directed.
M&L for Coloured Machine pressed cement concrete chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over and including 20 mm thick screed bed in cement mortor (1:6) complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work surface in cement mortar (1:4) with using Water Proofing Liquid’. (Note : WPC shall be measured & paid separately as supply only).
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping/bed block including weathering slightly rounded or chamfered angles and throating as directed and including necessary form work required complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 (20 mm graded aggregate) concrete as in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L for Use & waste for form work to soffits of suspended slab such as Lintel Beam, roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished rough and even complete all as specified and directed.
M&L for reinforced cement concrete (1:2:4) (20 mm graded aggregate) concrete as in Chajjas and the like complete all as specified and directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges
Demolition of brick work/stone bulder measonary built in cement mortar or cement lime mortar of any description and in any position all as specified.
Taking down cement or lime plaster any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with waters etc.
M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even by applying 3 mm thick wall care putty complete all as specified and directed. (Note : WPC shall be measured & paid separately as supply only).
M&L for 15 mm thick rendering consisting of two layers, first layer 10mm thick in CM 1:4 and top layer 5mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.
S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F MS TMT steel bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for prepration of new/Old plastered surfaces of wall and applying of Birla/JK white wall putty 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.
M&L for preparing new/Old plasteres surfaces and applying of Birla/JK white wall care putty 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified
M&L for Glazed ceramic coloured tiles in vertical surfaces 350 X 250/450 x 350X 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and including 10mm thick rendering CM (1:4) in dado/skirting tiles complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor sub base complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type E-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete.
S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with integral foot rests (excluding flushng cistern and flush pipe) and all as directed by Engneer-n Charge.
S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets, With flush pipe complete all as specified and directed.
S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge. (Make: Jaquar/Cera/Marc/Kohler).
S&F in repair 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC, Essess or Equivalent)
M&L for galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed in wooden /steel frame with tinned tack or galvanised wire staples or beading etc complete all as specified and as directed.
Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge
S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge
All same as per item No 42 here-in-before but 20 mm dia complete all as specified and as directed by Engineer-in-Charge
Supply only Liquid water proofing compound complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement all specified & directed 75mm bore complete all as specified and directed.
Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in wall/trenches or in floors 110 mm bore complete all as specified and directed.
Supply and fixing SWR bends (any radius) 110mm complete all specified.
PVC (SWR) vent cowl all specified & directed 110 mm dia complete all as specified and directed.
Dismantling existing water tanks of capacity exc 500& n.exc 1000 ltrs lowering from its position and removal to store.
S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.
M & L for rendering 15 mm thick in cement mortor 1:4 over PCC bedding with water Proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed. (Note : WPC shall be measured & paid separately as supply only).
Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, droplet etc, brushing neat cement slurry @3 Kg/Sqm, making good with PCC 1:2:4 (average thickness of PCC 25mm) using 20mm graded stone aggreate and 10mm thick plaster cement plaster in CM 1:3 including fixing of wire netting to match the existing surfaces.
Dismantling/ taking out of existing roof tretment with APP membrane of any thickness including taking out existing sreed bed / rendering of any thickness wth all necessary arrangements complete all as specified and as directed.
M & L for providing and applying smart care Dampproof, a fidre reinforced elastometric liquid water prrofing membrane formulated with reinforced acrylic fibres having Sun Reflective Index (SRI) of 105 on horizontal/ vertical surfaces of roof/ wall/ chajjas in multiple costs @2.0 litre/ sqm. Primary coat is self-priming coat of elastomericwaterproofing liquid (Dilition with water in the ratio of 3:1, damp proof : Water) and other coat to be applied undiluted. The coating needs to be reinforced with 40GSM Geotextile, to sandwiched between 2nd &3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Cgarge. Make : SmartCare Damp Proof of Asian or equivelent in Berger/ Nerolac/ STP only.
M&L for PCC 1:3:6 type C1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, Hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.
M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.
Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.
S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.
S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) as specified and as directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
S&F 35 mm thick , 2nd class hard wood factory made, rail and style, plain framed, panneled shutter (three panel) lock rail and panel of 12 mm BWP ply commercial on both faces. The size of rail and style as per IS-1003 (part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) n.exc. 1.5 sqm each and removing off the premises complete all as specified and directed.
S&F factory made steel window with side hung shutter incl boxtype hinges with pressed steel handle, and steel peg stay with glazing bars, devetailed or welded including one coat of red oxide primer complete. Make - Shivmular or equivalent.
S&F factory made steel ventilator with top hung shutter incl hinges, steel peg stay including one coat of red oxide primer complete. Make - Shivmular or equivalent.
S&F MS framed work such as grills, gate ang guard bars of window and hung as gates, including pintle hinges, stops, hand-made sliding bolts,similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) including one coat of red oxide primer.
M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F mild steel butt hinges medium weight cold rolled of size 100 mm shutters. complete all as specified and as directed.
S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed.
S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed.
M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Rolled sections Fe 410-W (Gde-E- 250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as required complete all as specified and as directed.
M&L PCC (1:2:4) (40MM graded stone aggregate) as in surface channel of drain complete.
Demolition and breaking up SGSW drain pipes 150 mm dia jointed in cement mortar all as specified.
M&L SGSW drain pipes 150 mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed by Engr-in-Charge.
M&L cement concrete bed (1:4:8) type D-2 using 40mm graded stone aggregate as in bedding to SGSW pipes 150mm dia to drain pipe including formaing cradels in complete all as specified and as directed.
Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
S & F Stop valves 20mm Dia, but fancy type, chromium plated with long shank and cup chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
M&L for Vitrified Ceramic Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and incl 15mm thick screed bed in CM 1:6 complete all as specified
Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but nexc 2 sqm each complete all as spd
M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F in repairs CP brass WHB mixer for mixing hot & Cold water screwed down for iron pipe 15mm bore complete all as specified and directed.
S&F in repairs CP brass wall mixer 3 in 1 incl hand shower and wall shower (having leg/bend/arrangement for connection to shower) for mixing hot & Cold water screwed down for iron pipe 15mm bore complete all as specified and directed. (Make: Jaquar CON-281KN or equivalent in Marc/ Kohler)
S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white, complete all as specified and directed.
Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply only waste fitting 32mm dia , CP for WHB with long screwed shunks and nuts complete all as spd and directed
S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair 15mm bore 2 way bib tap chromium plated brass with flange complete all as spd & directed (Make: Jaquar/Marc/Kohler).
S&F in repair Toilet paper holder SS fixed to walls with chromium plated (CP) brass screws complete all as spd & directed (Make: Jaquar/Marc/Kohler).
S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd
S&F CP health faucet with 1.00mtr long CP flexible pipe as per approved samplecomplete all as spd and directed (Make: Jaquar/Marc/Kohler)
S&F in repair CP brass towel ring round with round flange fixed with screw to wall complete (Make: Jaquar/Marc/Kohler)
S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed (Make: Jaquar/Marc/Kohler)
S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete
S&F grating doom 100mm dia of PTMT complete.
S&F in repair SS soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete as specified and directed
S &F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing.
S&F pressed steel frames for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed and sekeleton shutter's open rebated prepare to receive glass gouge etc edges of framing plain chamfered or ronded fitted with cut and mitered bead's for securing glass gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.2(a).
S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed .
Providing and fixing factory made uPVc white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (100mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.
S&F stainless steel bar as in window grills, design & pattern as approved by GE, complete all as specified and directed.
Supply and fixing factory made uPVC white colour Three track three panels glazed sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg). G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge(Balcony door)
M & L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified
M&L for Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (40 mm graded aggregate).
Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft/loose soil as directed by Engineer-in-Charge.
M & L for Machine pressed rubber moulded vibro compacted precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment over and including 50 mm thick sand coushioning complete all as specified.
Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.
M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed.
M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.
S&F in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.
Supply only stainless steel acessories suitable for kitchen cabinets as under:-
(a) Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent approved.
(b) Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent approved.
(c) Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers of approvedMake: Life style Cat part No WA/CUT/15204 or equivalent approved.
S&F Telescope basket (channel) 450/ 600mm length of extruded MS galvanised rollers of approved quality
M&L for Modular kitchen & Wardrobe / cupboard with 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board leives of action Tesa and equavalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic) type) etc or sliding sliding with track arrangement as directed including necessary accessorise like Brass handle, Magnatic catch etc and steel baskets of required size mounted on suitable channels with ball bearing to moving of baskets smoothly including all necessary fittings complete all as specified. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl fixing with adhesive in appropriate platform complete all as specifed and dircted.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted .
S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Cat part No:-. BSSBSD-52 of Make Blue Star or equivalent model in specified makes as approved by GE.
S&F 15 mm bore brass CP single lever Sink mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make : Jaquar Cat Part No. LYR-38309 /Hindware F-280020CP or equivelent.
S&F Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass(ass approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt ,.200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 leaver brass 100mm long mortick lock & doubble action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.
Supply and fabrication & fixing of Modular kitchenlower and upper cabinet etc , all front side, bottom, two sides and partions etc made out of 17 mm thick HDHMR board a (Action tesa or equivalent ) with Shutter Color with gossy colour laminate on all exposed front side and other sides decorative laminations .The front face shall be covered with glossy laminate and with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates as approved by GE) including all accessories of fittings Drawers of innotech Imported 4"-1 No & 6" 2 No & 1 PVC Cutlery Tray, Dish Rack above Sink for Utensil with - Auto/soft closing hinges for shutters , C/J gola profile for handle for kitchern drawers, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and as directed. ( Note - Only front face measured for payment with Front face excedding 5 sqm and not exceeding 10 sqm)
M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar 1:6 including incl dismantling of old tiles removing rubbish off the premises complete all as specified and as directed
M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.
M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concetp in matching pattern of size exc 0.18 Sqm but nexc 0.72 Sqm 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 15 mm thick backing coat in CM (1:4) including dismantling of floor, hearth or wall tiling complete all as specified and directed.
S&F Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, P or S trap, fixed in repairs, complete all as specified and as directed. Make : Hindware or equivalent in Jaquar/Somany/Cera as approved..
S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.Make : Jaquar clarion series - Cat Part No- CQT-23167B or equivalent in Marc/Kohler
S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete.
S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete Make : Jaquar continental series - Cat Part No- CON-107KW or equivalent in Marc/Kohler/Cera.
S & F in repair CP shower rose fancy type 200mm x 200mm size with 600mm long shower arm fixed to 15mm bore pipe, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler/Cera)
S&F in repair Wash basins, Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets
M&L Brick work with sub class B Bricks, Straight or curved on plan to any radius in Cement Mortar 1:6 complete all as specified and directed
M&L for rendering 10 mm thick cement Plaste 1:6 on fair faces of brick complete all as specified and directed
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.
M&L two coats of smooth acrylic emulsion paint with rich matt finish(interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on ceiling surface and applying a layer of 1mm thick wall care putty again sand papering thus making surface smooth and applying one coat of primer complete all as specified.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
S&F Suspensended Gypsum board 12mm thick for Celiing with Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of the existing complete all as specified
Cutting holes into or through brick walls built in Cement Mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial n ecx 1.50 sqm
Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.
M&L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified.
Spreading and levelling in layers n exc. 25 cm thick, complete all as specified
Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
M&L for hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified
S&F Pressed steel frames for doors 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed.
M&L for Non - skid coloured Ceramic tiles, light shade, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed Cm 1:6 complete all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface as in dado 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and fair without using extra cement
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and fair without using extra cement
M&L for preparation of newly plastered surfaces of wall and applying two coats of acrylic emulsion paint over one coat of cement primer and one coat of 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over one coat of primer all as specified.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified.
S&F for 10ltrs PVC valveless, syphonic ac-tion type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F for Vitreous China wash basin, white, flat back, size 550x400 including brackets
S&F for 15 MM CP brass WHB Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed.
S&F for fancy type chromium plated stop valves cast copper alloy screwed down high pressure with crutchor butterfly handle screwed both ends for iron pipe or for union 15 mm dia bore and fixed
S&F for Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed
S&F for 75mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
S&F for PVC (SWR) floor trap, plain with grating (waste hole/ plain type ) including jointing with solvent cement, 75 to 100mm dia of outlet all as specified.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified.
S&F 100 mm stack clamp out of 50 mm by 5mm flat iron and 16mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof.
S&F in 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.
M&L for Cement concrete Type B0 1:2:4 (12.5mm graded aggregate) for copings on brick work complete all as specified.
M&L for precast cement concrete cover slabs 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed.
M&L for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS commplete all as specified.
S&F Pre-Painted min 60mm puff insulated having density not less than 40 kg/cum and thermal condictivity 0.02w/mk sandwich with galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick on both faces of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl MS box with plastic laminated sheet of suitable size for fixing switches/sockets/fan regulator etc , and making good surface as original complete all as directed for the following :-
(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
(b) one socket outlet point 5 amps on the same board.
(c) one socket outlet point 5 amps on the independent board.
All as per srl item No 178 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 15 Amp light point.
S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.
S & F for switch piano, flush type single pole, one way 15 Amp complete all as directed.
S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.
S & F for of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.
S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed.
S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.
Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.
Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.
S&F in replacement of LED bulk head fitting made of cast aluminium alloy with opal glass diffuser , complete all as specified and as directed.
M&L for PVC in replacement ventilatiing fan 250mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and as directed and depositing the old u/s to MES store yard.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.
Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of isolator 32 Amp, SPN type complete all as directed.
Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.
Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.
M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.
Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.
M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing conduit pipe and in existing modular box covered with existing modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :-
(a) One light point/ fan point/ bell point controlled by one switch
(b) One socket outlet 5 Amps controlled by one switch on same board
(c) One socket outlet 5 amps controlled by one switch on independent board
All as per item No.198 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for power socket complete all as directed.
S & F modular Socket, 16 Amp, multipurpose type, 02 module size complete all as directed.
S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.
S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.
S & F Modular Fan regulator step type ,120 watts, 1 Module size complete all as directed.
S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.
S&F in repair modular socket outlet 6 amps 3 pin 2 module all as directed.
S&F in repair Modular white cover plate with frame 1 module all as directed
S&F in repair Modular white cover plate with frame 2 module all as directed
S&F in repair Modular white cover plate with frame 3 module all as directed
S&F in repair Modular white cover plate with frame 4 module all as directed
S&F in repair Modular white cover plate with frame 6 module all as directed
S&F in repair Modular white cover plate with frame 12 module all as directed
S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed
S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed
S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed
S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed
S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed
Supply and fixing PVC batten holder including 9 w LED bulb all as all as specified and directed.
Supply and fixing electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.
Material and labour wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in existing PVC conduit and conduit fitting etc complete all as directed.
Supply and fixing Modular AC Socket with 25 Amps SP MCB, 230 Volts, 50Hz. Complete.
Supply and fixing wall light fitting comet type with 9 watt LED lamp with and including all electric connections complete all as directed.
Supply and fixing LED ceiling light fitting 10 watt, in round shape, surface/recessed type and making all electric connections complete all as directed.
S&F of Exhaust fan 300mm sweep single phase in built grill metalic body type ,and depositing the old u/s to MES store yard complete all as directed .
S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 16 way, double door complete with din rail, complete all as specified and directed.
Supply and fixing in replacement Isolator SPN 63 A including connections complete all as specified .
Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to MES store yard complete all as specifed and directed.
S&F in replacement of rigid non metallic medium grade PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed.
S&F in replacement of rigid non metallic medium grade PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed.
Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.
S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.
M&L for DB fabricated cut of prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work incl hinges, handle, hasp and staple etc of suitable size complete all as specified and as directed.
M&L in replacement for Sub main wiring with 2 run of 6 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC Surface/ concealed conduit medium grade with all fittings 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
M&L in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC Surface/concealed conduit 25 mm dia with and including 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
S&F in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connection complete all as specified and as directed.
Supply and fixing replacement of MCCB 200 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting.
Supply and fixing in replacement of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SPN, C Curve type of capacity 20 Amp, 10 kA complete all as directed.
S&F in replacement of change over switch off load type AC, 415 Volt, TPN 200Amp side handle operated heavy duty in sheet metal encloser complete all as specified and directed.
S&F in replacement of Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar complete all as sfd.
Supply and fix MCCB box suitable for fixing MCCB, 3/4 Pole Upto 400Amps. Note : MCCB will be measured and paid separately.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.
M & L in replacement for laying of Galvanised Iron tubes light grade 80 mm dia for cable protection at site complete all as specified and directed.
Material and labour for installation , testing & commissioning of waterless and maintenance free Gel earthing (C C M compound) , with BFC-50 Kg Jam fill compound alongwith 50 mm dia Cu bonded MS rod of length 3.00 mtr below ground level including duly augering in ground, pre cast or in situ cast in high purity electrically conductiv granutar material having ulta low resistive value to achieve resistance below 2 Ohms complete all as specified and directed by Engr-in-Charge.
Supply and fixing Copper strip of size 25 mm x 3 mm from earth to test point all as specified and directed.
M&L of submain wiring complete with 2 x 6.0Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6Sqmm( same specification ) as earth wire in existing PVC conduit complete all as specified and as directed.
M&L of submain wiring complete with 2 x 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 2.5Sqmm( same specification ) as earth wire in existing PVC conduit for provision of cable through connector complete all as specified and as directed.
S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.
S & F of MCB C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.
S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.
Supply and fixing of ceiling fan clamp with J hook fabricated with welding out at site of MS flat 9 x 11 mm thick complete all as specified and as directed.
M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed
S&F of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.
Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
Supply and fixing of flood light clamp fabricated with welding out at site of MS flat 9 x 11 mm thick complete all as specified and as directed.
M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly drawing through and including concealed pvc pipe mediium grade not less than 20 mm dia and including modular metal flush box and cover plate with frame for mounting modular switches, sockets or fan regulators etc for one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.complete all as specified and as directed.
All as per item No 254 here-in-before but one socket outlet point 5 amps on the same board.
All as per item No 254 here-in-before but one socket outet point 5 amps on the independent board.
All as per item No 254 herein before but with 2.5 Sqmm cable for independent point and using 2.5 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.
S&F modular switch flush type, 6 amps one way,SP,230 volts AC complete all as specified and directed.
S&F modular socket outlet 6 amps complete all as specified and directed.
S&F modular socket outlet 6 & 16 amps complete all as specified and directed.
S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.
S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed.
Akhil Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .