Preventive maint incl internal and external painting to walls, painting to wooden and steel surfaces, upkeep of JCO/OR MD Accn at Varanasi Cantt.

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth including preparing new plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for applying two coats of oil bound distemper smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth incl preparing new plastered or unplastered surfaces of walls complete all as specified and directed.

M&L for applying two coats of cement based paint smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specfied and directed.

Complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for Waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1 mm over the New plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M&L for One coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying two coats of Oil Bound Distemper paint on prepared new/old plastered surfaces of walls using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for One coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including filling depressions of scrapped surfaces of wall including cornices, pilastered etc. and applying one coat of cement base paint Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including filling depressions of scrapped surfaces of wall including cornices, pilastered etc. and applying two coats of cement base paint Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepaing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of cement base paint over wall care putty Upto required height and using proper scaffolding arrangements complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including filling depressions of scrapped surfaces of wall including cornices, pilastered etc. and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for Preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for Preparation of old decorated surfaces of walls and applying one coat of exterior emulsion paint in approved color complete all as specified and directed.

M&L for rewriting of letters or figures (block, Roman , Italic or indian ) with fluoresecent paint height of letter exceeding 15 cm but not exc 30 cm and width of letter exc 25 mm but not 40 mm wide complete all as specified and directed.

Notes for all paintings works:- (a) The preparatory and application work pertaining to periodical services & water proofing shall be executed from authorized applicator duly certified by the manufacturer of the paint, distemper, putty etc. (b) The contractor shall obtain approval of the agency from GE within 10 days of the award of the contract and shall enter a Memorandum of understanding (MOU) with the manufacturer duly approved by GE. The copy of MOU shall be submitted to the department by the contractor with 20 days of the award of the contract. The execution of work shall only be commenced after the submission of MOU and necessary approval from the Engineer-in-Charge. MOU shall be valid during the currency of the work. However, during defect liability period if any defect is noticed the contractor shall only be responsible for rectification of the same.

Notes (Contd....)/- (c) For work upto 12 mtr height, necessary scaffolding, props, jacks, shuttering & ladder shall be provided by the contractor. Green cloth shall be provided all around the work site for any position/ height with all other safety precautions (i.e. safety jacket, safety shoes, helmet, safety harness, safety goggles etc). Rate quoted by the contractor shall be inclusive of the above arrangement and nothing extra shall be admissible at later stage. The work shall only be commenced after the proper check of safety precautions by the Engineer-in-Charge. (d) Insurance for each worker shall be provided by the contractor and it shall be deemed to be included in the quoted rate. (e) Masking/ covering of window/ doors during spray painting using polythene film shall be deemed to be included in the quoted rate (f) No payment for additional height shall be paid to the contractor. (h) Completion of the work shall only be issued after proper cleaning of floors/mats and clearing of site has been done by the contractor all as per direction of Engr-in-Charge.

Usha Contractors and Engineers

M/S JAI DURGA CONSTRUCTION

M/S DEEKSHA CONSTRUCTION

M/s multienterprises

SINGH BUILDERS