REPAIR TO APP TREATMENT WOODEN WORKS, ROOF SHEETS SEEPAGE TREATMENT CEILING AND PANELING WORKS INCLUDING ALL B/R ASSOCIATED WORKS IN SECTOR C AND D OF AGE BR I UNDER GE 865 EWS

Amount

Roughenng surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed by Engr-in-Charge.

Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3, complete all as specified and as directed by Engr-in-Charge.

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter. complete all as specified and as directed by Engr-in-Charge.

M&L 25 mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in roof padding complete all as directed by Engr-in-charge.

M&L for 20 mm thick bedding layer in CM 1: 4 complete all as specified and as directe. complete all as specified and as directed by Engr-in-Charge.

M&L priming surfaces and applying normal treatment (for moderate condition ) for App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including preperation of new surface of membrane and applying two coats of Alumminium paint, complete all as specified and as directed by Engr-in-Charge.

Dismantling boarding / wooden flooring of any description ,fixed in any positon, complete all as directed by Engr-in-charge.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture all as specified and directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work), complete all as specified and as directed

S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge

M&L providing and fixing Gypsum board 12mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section, complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall paneling, complete all as specified and as directed.

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiliing paneling, complete all as specified and as directed.

M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceilimg panelling, shelves/boarding complete all as specified and as directed.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in Ceiling panelling, shelves/boarding complete all as specified and as directed.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed.

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275, complete all as specified and as directed.

Ditto all as item No 25 above but except sheeting, complete all as specified and as directed.

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified, complete all as specified and as directed.

Ditto all as item No 27 above but except sheeting any thickness, complete all as specified and as directed.

S&F Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed.

S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hi, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.

Dismantling timber scantling over 40Sqcm in section (unframed) in any position complete all as specified and as directed

M&L for 2nd class soft wood clean sawn timber fixed as in scatling fixed with nails complete all as specified and as directed.

Ditto all as item No 32 above but except timber complete all as specified and as directed.

M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and as directed

M&L for PCC type D-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc, complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed by Engr-in-Charge.

S& F mild steel Hand rails, half round or other steel section or core for wooden hand rail straight portion , drilled and countersunk for balusters running bas for doors , balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gd E 165, complete all as specified and as directed

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Demolition of precast concrete block /stone walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and as directed

Ditto as above item no 41, but except blocks.

M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4, complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika

M&L Preparation of plastered ssurface of new wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer as directed complete all as specified and as directed.

M&L for preperation of old painted steel sheets of any descripton and applying one coat of synthetic enamal paint (galvanisation should be removed if required) ,complete all as specified and as directed.

Complete removal of existing treatment on steel /aluminium roof covering of any description, priming surface and applying normal treatment (for moderate condetions) using glass fibre base bitumen felt of (minimum 2mm thick ) , grade 2.

Deduct Schedule of Credit of Rs (-) 198900.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Rampal Singh Contractor (BID ID -3292636)

PARIDHI CONSTRUCTION (BID ID -3297984)

Horizon Construction Company (BID ID -3292843)

Mehar Enterprises (BID ID -3297828)