Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.1 LAccepted-AOC | L1 | Accepted-AOC Work allotted | |
| 2 | L3₹80.8 L+₹4.6 L (6.09%)Rejected-Finance 00 VIDYUT NAGAR MEERANPUR SADDARALI TANDA AMBEDKAR NAGAR UTTAR PRADESH 224238 | AMBEDKAR NAGAR | UTTAR PRADESH | 224238 | L3 | Rejected-Finance Rate are at higher side | |
| 3 | L3₹82.2 L+₹6.0 L (7.92%)Rejected-Finance | L3 | Rejected-Finance Rate are at higher side | |
| 4 | Not Admitted-Fee/PreQual/Technical C 27 INDUSTRIAL AREA C 27 PHASE II INDUSTRIAL AREA MOHALI PHASE 2 SAS NAGAR PUNJAB 160055 | S A S NAGAR | PUNJAB | 160055 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | The PLC Coop LNC Society Ltd. L3 | Darsh constructions L1 | M/s Priya Construction Company L2 |
|---|---|---|---|---|---|---|
| 1.00 | P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 2.00 | P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 3.00 | P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 4.00 | P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 5.00 | P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 6.00 | P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 7.00 | P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm
thick. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 8.00 | P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm
Dia and 10mm thick | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 9.00 | P/F Back Extension is made from IS-1239 “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground.The nut Bolts used for assembly are made from SS material. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
| 10.00 | P/F Weight lifter is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground. The foundation pipes are embedded in CC stock and painting is done by attractive color spraying after proper surface treatment, the initial coat of primer surface is applied before top coat. The powder coating is done from Polyurethane and Epoxy Powder with 60 to 70 Micron Thickness. | 16 | Each | 39,500 ₹6,32,000 | 36,600 ₹5,85,600 Lowest | 38,830 ₹6,21,280 |
Tender Value
₹76.5 L
EMD Value
₹1.5 L
Closing Date
23 Dec 2025, 5:00 pmClosed
MAHENDER SINGH
Municipal Corporation Faridabad
Providing and Installation of open gym equipment in various parks in NH-1, NH-2 and NH-3 (DandE Block) Ward no.11and12, Faridabad
2025_HRY_490688_1
202578CC0A69 BBC9 4B34 B3DF 91D190574B66284ULB
Open Tender
Civil Works
Works
130 days
Faridabad (MC)
2 documents required · 2 mandatory
₹5,000
₹1.5 L
Yes
13 Apr 2026
16 Dec 2025
24 Dec 2025
16 Dec 2025
23 Dec 2025
16 Dec 2025
16 Dec 2025 - 18 Dec 2025
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: Executive Engineer, Municipal Corporation, Faridabad.
Name of Work: Providing and Installation of open gym equipment in various parks in NH-1, NH-2 and NH-3 (DandE Block) Ward no.11and12, Faridabad.
Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate to be quoted by the agency in (Rs.) Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
1 P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. BI01010001010000000000000515BI0100001114 16 Each 0 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
2 P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used BI01010001010000000000000515BI0100001115 16 Each 1 Excess(+) Full Conversion INR
3 P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. BI01010001010000000000000515BI0100001116 16 Each 2 Excess(+) Full Conversion INR
4 P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, BI01010001010000000000000515BI0100001117 16 Each 3 Excess(+) Full Conversion INR
5 P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick. BI01010001010000000000000515BI0100001118 16 Each 4 Excess(+) Full Conversion INR
6 P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick BI01010001010000000000000515BI0100001119 16 Each 5 Excess(+) Full Conversion INR
7 P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. BI01010001010000000000000515BI0100001120 16 Each 6 Excess(+) Full Conversion INR
8 P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick BI01010001010000000000000515BI0100001121 16 Each 7 Excess(+) Full Conversion INR
9 P/F Back Extension is made from IS-1239 “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground.The nut Bolts used for assembly are made from SS material. BI01010001010000000000000515BI0100001122 16 Each 8 Excess(+) Full Conversion INR
10 P/F Weight lifter is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground. The foundation pipes are embedded in CC stock and painting is done by attractive color spraying after proper surface treatment, the initial coat of primer surface is applied before top coat. The powder coating is done from Polyurethane and Epoxy Powder with 60 to 70 Micron Thickness. BI01010001010000000000000515BI0100001123 16 Each 9 Excess(+) Full Conversion INR
11 P/F Triple Horizontal Bars are made from “B” Class GI-Pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick/or holepass made in 25x25x3 angle welded on all 4 sides of the pipe bottom. The Handle frame and connecting rods is made of 25mm NB “B” Class GI-pipe. Seat frame is made from 50mm NB “B” Class GI- Pipe. -_ BI01010001010000000000000515BI0100001124 16 Each 10 Excess(+) Full Conversion INR
12 P/F Rower is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The Handle frame and connecting rods is made of 25mm NB “B” Class GIpipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. BI01010001010000000000000515BI0100001125 16 Each 11 Excess(+) Full Conversion INR
13 P/F Cross Trainer is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The handle frame is made 25mm NB “B” Class GI-pipe. Foot rod is of 40mm NB “B” Class GI-pipe. Fo BI01010001010000000000000515BI0100001126 16 Each 12 Excess(+) Full Conversion INR
Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos
Quoted Rate in Figures Select
Quoted Rate in Words
stage.html
html • 0.05 MB
technical_568973.pdf
techsummary_568973.pdf
finance_568973.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
BOQ_568973.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .