Special repair to non residential buildings under Division No. III Shimla. (SH- Providing and fixing reflective signage boards regarding emergency scenarios within the premises of High Court Shimla).

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or More Coat

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over of approved brand and manufacture.including carriage of materials in all leads and lifts.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead. For thickness of tiles 10 mm to 25 mm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable materials within all leads & lifts as per direction of Engineer-in-charge.

Disposal of moorum/ building rubbish/ malba. Similar unserviceable , dismantled or waste material by mechanical transport including loading, Transporting, unloading to approved Monicipal dumping ground for lead upto 10km. Foe lalleafts, complete as per dierection of Engineer- in Charge.Note:-Item to be applicable in urban area having directions for restricted hours movement/ plying of load carring motor vehicle of 3.5 cum. or More.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of materials in all leads and lifts (i) Size of Tile 600x600 mm

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Providing and Fixing false ceiling with water proofing system of Himalayan Gloss ceiling tiles made of wood fiber cement composite 15mm thick to cobvered with acoustic absorptive microfiber of Size 600x600mm of shade installed on T24 U Grid Specially designed for acostic vibration etc complete including carrige of materials in all leads and lifts

Kota stone slab flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of materials in all leads and lifts:-20mm thick.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) complete including carriage of materials in all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):(i) With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing M.S welded mesh 25mmx25mmx3mm thick as per approved design welding with electric plant complete including applying priming coat of red lead paint as per HP.PWD. Specification 1990 Volume-1 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing MS sliding door bolts, ISI marked anodised, with nuts and screws etc. complete including carriage of materials within all leads and lifts.(i) 250x16mm

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Including carriage of material in all leads and lifts.

Painting on Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over of approved brand and manufacture.including carriage of materials in all leads and lifts.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within carriage of material in all leads and lifts:- All kinds of soil.

Providing and laying cement concrete 1:2:4 (1 cement:2 sond 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work including carriage of materials im all leads and lifts in foundation and plinth

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 19mm thick Commercial board shutters for cup boards i/c fixing with required No. of nickel plated piano stainless steel hinges with screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 4.00mm thick ACP sheet of approved shade interior grade for partition/ window shutter both side laminated with PVC gasket etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(i) Granite of any colour and shade

Providing and fixing 9mm thick Shuttring ply wood Conferming to IS in Plain lining/ Panelling/ under Floors with Necessary Screws/ nuts & Bolts/ Nails and fixed on wooden Frame/ Steel frame ( Frame work Shall be Paid Seprately) as per direction of Engineer - in Charge. including carriage of material in all leads and lifts

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts.

Providing and fixing hard wood plain square edged cover fillets (beading) 19mmx6mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(i) Concealed work, including cutting chases and making good the walls etc. including carriage of materials within all leads and lifts:(a) 15 mm nominal outer dia Pipes

Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :including carriage of materials within all leads and lifts & as per direction of Engineer-in-charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials with in all leads and lifts complete in all respect as per the direction of Engineer - in Charge (i) 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality Jaqua Cat No. KUP35038PM conforming to IS standards and weighing not less than 810 gms.including carriage of materials within all leads and lifts

Providing and fixing C.P. brass angle Cock Jaquar for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts Cat No. KUP35053PM

Providing and fixing wash basin with Pedestal, C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a 15 mm CP Brass single hole basin mixer including carriage of materials within all leads and lifts.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 90 mm.

Providing and fixing on wall face PVC Finolex type-B spigot,socket, waste and ventilating pipes of working pressure not less than 4.5 kg/sqm including coller and filling the joints with approved adhesive complete including carriage of materials within all leads and lift(i) 110mm Dia

(ii) 75 mm dia

Providing and fixing PVC Finolex door bend ISI marked complete including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts (i) 110mm Dia

(ii) 75 mm dia

Providing and fixing PVC Finolex Plain bend ISI marked complete

(ii) 75 mm dia

including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts (i) 110mm Dia

(ii) 75 mm dia

Providing and fixing Collar joints with approved adhesive complete including carriage of materials within all leads and lifts (i) 110mm Dia

(ii) 75 mm dia

Providing and fixing PVC Finolex single equal branch (a) with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.(I)110mm Dia