174 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

G.I. Pipe 6'' dia

LT Clamp

LT Shackle Insulator

Copper L Piece for 400 KVA Transformer

Copper L Piece for 630 KVA Transformer

Aluminum Lug (Long Barrel)

Holding Clamp with Nut and Bolt

Tainless unit

Nut & Bolt

L.T. Clamp with Nut and Bolt

luminium lug for 150 sqmm

luminium lug for 240 sqmm

luminium lug for 400 sqmm

Aluminium lug for 250 KVA Transformer

Copper L Piece 50x225x10 mm

Glad 63 mm dia

Pre Cost Pannel Base

Alluminum lug Different Size

Aluminum lug 63 KVA T/F

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

PCC POLE 8.5

ST Pole 11 Mtr. Long

11 KV VCB outgoing Feeder CTR 200/100/5A

LT Pannel A Type

Line Isolator 800 A

Bus Isolator 800 A 33 KV

11 KV Bus Coupler

11 KV XLPE Cable 3x120 sqmm

11 KV XLPE Cable 3x185 sqmm

11 KV outdoor Cable Jointing kit 3x120 sqmm

11 KV indoor Cable Jointing kit 3x185 sqmm

11 KV outdoor Cable Jointing kit 3x185 sqmm

AB Cable (3x120+1x95+1x16)

L T XLPE Cable 1x630 sqmm

L T XLPE Cable 1x400 sqmm

LT XLPE Cable 1x240 sq mm

LT XLPE Cable 3.5x240 sqmm

LT XLPE Cable 3.5x400 sqmm

LT Staight Through 3.5x400

LT Staight Through 3.5x240

ACSR Weasel Conductor

ACSR Panther Conductor

T/F 63 KVA

T/F 100 KVA

T/F 250 KVA

T/F 400 KVA

T/F 630 KVA

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support PCC/ST on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support PCC/ST on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR WeaselConductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of ACSR Panther Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Mounting of 630 KVA Transformer as per RESSPO Norms.

Installation of 11 KV VCB outgoing Feeder CTR 200/100/5A

Installation of LT Pannel A Type

Installation of Line Isolator 800 A

Installation of Bus Isolator 800 A 33 KV

Installation of 11 KV Bus Coupler

Laying of underground 11 KV 3x120 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x120 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x120 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

FRP Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Pipe Type Earthing as Per RESSPO Norms (All Material is Provided by Contractor)

Connection of L.T. XLPE Cable Different Size & Different Places

Repalcement of PG Clamp for ACSR Panther Conductor made Aluminum Alloy LM-6 Nos GI Nut and Bolt of size 63x18 mm heavy duty (All material Labour and T&P will be Provided by Contractor)

Repalcement of 33 KV Isolator Clamp for ACSR Panther Conductor made Aluminum Alloy LM-6 Nos GI Nut and Bolt of size 63x18 mm heavy duty (All material Labour and T&P will be Provided by Contractor)

Repalcement of 33 KV Isolator Rod 800 Amp made of electrolytic copper flat 1.0 m long size 32x5 mm (All material Labour and T&P will be Provided by Contractor)

Repalcement of damaged 33 KV Isolator Jaw 800 Amp made of electrolytic copper strip for Isolator blade fitted GI Frame with Connection Plate of size 75x6 mm with holes for fitting & tightening of 33 KV Isolator clamp for ACSR Panther Conductor 1.0 m long size 32x5 mm (All material Labour and T&P will be Provided by Contractor)

Fixing and Interlocking Brick and Sand in Switch Yard and Approach Road

Delta Earthing for T/F Neutral up to Water lavel Boaring type

Replacement of CT Connector clamp for ACSR Panther Conductor made Aluminum Alloy LM-6 GI nut and Volt of size 63x18 mm Heavy duty (All material Labour and T&P will be Provided by Contractor)

Installation and Fixing of LT Staight Through 3.5x400

Installation and Fixing of LT Staight Through 3.5x240

Rect Back 10 KVA T/F

Rect Back 25 KVA T/F

Rect Back 63 KVA T/F

Rect Back 100 KVA T/F

Rect Back 250 KVA T/F

Rect Back 1000 KVA T/F

Hindustan Electric Work

M/S SATYAM TRADING COMPANY