GE 861 EWS-12(T)/2026-27

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/ Loose soil complete all as specified and as directed by Engineer-in- charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in any type of soil complete all as spefied and as directed by Engineer-in-Charge.

Removing excavated material/soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point, complete all as spefied and as directed by Engineer-in-Charge.

Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as spefied and as directed by Engineer-in-Charge. (Note:- Punned thickness shall be considered for payment purpose)

Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.

Material & Labour in replacement Pin type insulator porcelain /polymer, vitreous, white / brown or green insulators with and including one galvanised MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade with and including dismantling of old existing unservicable insulators complete all as specified and directed by Engr-in- Charge.

Material & Labour in replacement Shackle type insulators, porcelain, vetreous white/ brown or green including galvanised MS strips, bolt,nuts and washer of size 75mm height and 90mm dia,size of strap section 31mm x 3mm and dia of 12 mm for working pressure 1100 volts grade with and including dismantling of old existing unservicable insulators complete all as specified and directed by Engr-in- Charge.

Material & Labour for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as directed and inclusive of one coat of zinc chromate primer , with and including one under coat and one finished coat of aluminium paint complete including dismantling of existing unservicable cross arms of MS channel complete all as specified and directed by Engr-in- Charge. Notes: 1. The measurment and payment shall be made on the actual weight of mild steel material. The weight of premier and paint shall not be considered while weighing of mild steel material.But the rate of one coat of zinc chromate primer , with and including one under coat and one finished coat of aluminium paint is included in this item and nothing shall be paid extra on this account.

Restretching only the ACSR conductor fixed on over head line / poles and tightening the ACSR conductor complete with authorised sag and binding with insulators in proper position after tighting with and including new aluminium binding wire of dia 2mm all as specified and directed by Engineer-in -Charge. Notes: 1. The rate of 2mm aluminium binding wire shall is included in this item and nothing shall be paid extra on this account. 2. Insulators if required for replacing , shall be measured and paid seperately under relavant items of Schedule'A' BoQ.

Supply and Laying in replacement GI tubing 40 mm bore Light grade with all fittings such as clamps laid in trenchs or fixed on wall along pole including fixing arrangement , nut bolts, clamps etc.complete for protection of electic cable / strip complete all as specified and as directed by Engineer - in charge. Note : Excavation and earth work shall be measured and paid seperately under appropriate items of Schedule'A'BoQ.