8379 ADDN ALTN AND SPL REP TO ADVENTURE CLUB IN P1 BUILDING AT NAVAL DOCKYARD MUMBAI PROVISION OF WATER FILTRATION PLANT AND ALLIED WORKS AT A14 BUILDING AT INS VAJRABAHU NAVAL DOCKYARD MUMBAI ADDN ALTN OF FIRST FLOOR OF FIRE BRIGADE OFFICE BUILDING

Amount

Dismantling of wall, wall panneling, partation and false ceiling boards (fibre, pulp, insulation) or insulation boards, bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed. (Make -Armstrong/Chanakya/Everest.

S&F 12mm thick prelaminated medium density fibre board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 12mm thick plywood , grade bwp type BB, fixed with screws to timber frame as in paneling/partition complete all as specified and as directed.

M&L for 0.9mm thick decorative laminate type-1 of surface finish, colour & pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Medium density fibre board, exterior grade, fixed to timber aluminium framework with screws complete all as specified and directed.

M & L for complete removal of existing treatment on wall surfaces and applying a coat chalk whiting on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper complete all as specified and directed.

S & F 100 mm Butt hinges, Mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S & F 100 mm Butt hinges, Cast Brass with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F Aluminium anodised sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

S&F Extruded aluminium anodised alloy handles, fabricated type 150mm size complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Supply and fix 150mm size brass handle cast type polished bright complete all as specified and directed.

S&F 200 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F in repairs Door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F venetion/roller blinds type made out of standard cloth of approved texture with necessary accessories etc fixed on window/door openings complete,all as specified and directed

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame), exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

S&F 2ndclass hard wood (SAL) plain solid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed bed laid over including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Excavation in post holes in hard/dense soil (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc. complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floos all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregat) as in floor all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Supply and fixing in repair Framed work such as grills, gratings, etc. with ends of bar shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks, cable trays and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plans to any radius in half brick thick walls built in cm (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat wall care putty (JK/Birla) of 1-2 mm thick and alkali primer on plastered surfaces complete all as specified and directed.

S&F in repair vitreous china white, Oval type Wash hand basin of size 600x700mm with and including CI bracket with granite, 32mm bore waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified.

S&F fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

S&F in reprairs 32mm dia PVC waste pipe for WHB and urinal 90cm long complete all as specified.

S&F in repairs PVC valveless syphonic action type, flushing cistern Low level white, with inlet ball valve, float and handle 10 Ltr capacity including brackets complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work over cement screed bed laid over including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone slab including rubbing and polishing complete all as specified and directed.

Removal of debries, old concrete, spoils etc. exc. 1.5 KM out side from MD Land complete all directed

Dismantling cast iron or reinforced concrete drain pipes of dia upto 100 mm jointed in cement mortar fixed to wall of high rise buildings and taking out from trenches as required complete all as specified and directed.

S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to and including 100mm dia 'P' trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed.

S&F 15 mm dia stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and directed.

S&F in repairs Chromium plated, tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps all as specified and directed.

S&F in repairs CI Bends 100 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs CI Bends 75 mm bore ( any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75mm dia of outler cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs. vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe, providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified.

S&F in repairs vitreous china urinals, bowl type, flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

S & F in repairst Vitreous china urinal partition white of size 310x700 mm and urinal partitions slabs terminating about 40cm above floor line, complete all as specified and directed.

S&F in repairs brass CP shower rose 75mm size swivel type with and including 460mm long brass CP heavy duty, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

M&L for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix, 40mm thk in two coats, using polymer as per manufacturer's instructions and including scaffolding upto any height complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosroc Note :- New reinforcement and MS Sections will be measured and paid separately

M&L for Providing and applying jacketing around columns/RCC members with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosroc Note: (i) Reinforcement shall be measured and paid separately. (ii) Quoted Rates also deemed to be included for jacketing, formwork and micro concrete)

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm ISI marked) with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC moduler box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one switch

One ceilingfan/wall fan/exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5 Amps switch socket combination on same board

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc for One 5pin, 15 Amps switch socket combination on same board complete all as specified.

S & F modular switch 1 way 6A all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F modular switch 1 way 16A,1 module all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed. Make : Cona/Anchor/Roma/Goldmedal/Legrand

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make : Roma/Goldmedal/Legrand

M & L in repair Submain wiring with 2 run 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 4Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly /mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/plaza/Gloster (c) Caping casing make : Asian/madi/Precision/National

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Havells /Philips / Bajaj

S & F in repirs LED light fitting 10W, 230 V, 2 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB2F10WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Havells /Philips / Bajaj

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S &F in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/ POP/ Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Havells / Philips

S &F 100 Watt LED, Highbay/Mediumbay LED IP65, PDC aluminium housing with mounting bracket / eyebolt, SMD LED array with intetrated lens polycarbonate cover, IP66 Protection suitable for Highbay light fitting and general purpose lighting complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.-LTEHB100WHPLED/LS/WOR (CORVUS-E SERIES) or equivalent cat part in Crompton/ Bajaj / Philips

S &F LED Street light 45 Watt powder coated PDC aluminium housing with sealed toughened glass cover, SMD LED with secondary lens complete with all acessories a including provission of GI bracket, clamps, Nut, bolt etc complete all as directed. Make- C & S CAT Part No.-LTESS45WLED/LS (Indus Series) or equivalent cat part in Crompton/ Bajaj /Philips

S & F MCCB, 415 volts, four pole of cap 100 Amps, 16 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand cat No 4200 15 or equivalent in siemens/GE / C&S

S & F in replacement of MCB, SPN 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4086 18-20 or equivalent in Siemens /GE/ C&S

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4085 87-95 or equivalent in Siemens /GE/ C&S

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 04 way, 240 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 40 or equivalent in Siemens /GE/ C&S

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 08 way, 240 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 41 or equivalent in Siemens /GE/ C&S

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 4 way, 440 volts with copper bus bar rating 100 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part No 5077 50 or equivalent in Siemens /GE/ C&S NOTE FOR ITEM No. 91 to 93 : [i] MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding. [ii] The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Ceiling fan 5 Star, Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC, having air delivery 220cum/min, 350rpm, supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core laid in duct / along pole/wall tc including making connection complete all as directed. Make of wire : Polycab/ Havells/ Gloster / Plaza Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3mm thick burried in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the platement less than 1.5 mtr below normal ground level connected to and including required length galvanised iron strip 25x4 mm means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES SSR 2009 (part-I) connected main switch board all as specified and testing on completion .

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm gi pipe light grade for protection.

Supply, install, testing and commissioning wall mounted Split type AC 1.5 TR capacity units indoor/outdoor complete with cordless remote control unit, 2020-240 volt, 50 Hz, single phase fitted with high quality rotary compressor air ioniser and Plasma filter for better indoor air quality with 5 star rating including inbuilt of voltage stabilizer for voltage bariation complete all as specified and directed. Note : Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted. Make : Voltas/LG/Hitachi/Dankin.

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

Supply & Installation water treatment sysytem 1000 Ltr/hrs equipment detail given below:- (a) water Feed pump Qty 01,capacity 1000 LPH @ 2.8 Bar, Centrifugal type, MOC SS304, make CRI or equivalent as approved by GE (b) Chlorine dosing system no of unit -01, metering type. Pvc body,flow range-0-4LPH, Max Discharge pressure 4 bar back pressure, 230 volt, Mixing tank size-30 ltrs, mixing tank MOC HDPE, make- E-Dose/equivalent as approved by GE (c) sand filter with multiport valve capcity-1000 LPH,Vessel size dia x length(TL-TL) Dia 0.35 x 1.65 meter Ht, vessel MOC FRP, Make starlite or equivalent Max working presssure- 3.0 kg/cm square, min working pressure 1.5kg/cm square filter media used quantity-o1 lot back wash period 15 minutes line size & MOC 200 MM UPVC, Pressure gauge provided (d) carbon filter with multiport valve capacity 2000 LPH Vessel size dia x length (TL-TL)Dia 0.35 x1.65 mtr Ht, Vessel MOC FRP, Make star lite or equivalent as approved by GE , max working pressure 3.0kr/cm square, minimum working pressure 1.5 kg/cm square MOC of hosing & cartridge P.P, Spun,no of cartridge 5 micron 20" - 01 no, line size 20 mm UPVC , Presusure gauge provided, (e)Ultraviolet system feed flow Rate 1mtr cube/hour. MOC Housing SS 304, Make Alfaa, storage tank capacity 4000 ltr Vessel MOC SS 304 Qty-02 nos. (f) Control panel-01 No (g) MS Skid(power coated)-01 set (h) SS Tank- 02 Nos. Note : Srl No. (a) to (h) are deemed to be included in quoted rate.

S&F steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends & laid in trenches, with all fitting including taking down existing rusted pipes for the following sizes all as directed and specified

(a) 15 mm bore (fixed on wall)

(b) 20 mm bore (fixed on wall)

(c) 25 mm bore

S&F in repairs in existing line, gun metal gate valve with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified of following sizes :- Make : Guide/BIR/sant ( ISI marked )

(a) 25 mm bore

(b) 15 mm bore (fixed on wall)

(c) 20 mm bore (fixed on wall)

siddharth and company