Repair rnovation of Qtr No. 14 block Z at PHC Qammerwari Srinagar

Amount

Dismantling of old Ply wood wardrobes partly bulged & damaged, including stacking of serviceable material & disposal of unserviceable material as directed a site of work by the EIC including all sorts of carriages complete Job.

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposed of dismantling material as directed at site of work by the EIC.

12mm cement plaster on rough side of single or half Brick wall / concrete wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

Providing and fixing of wardrobe 2’-0” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)

Providing and fixing of Kitchen Almirah’s 1’-3” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board & back covering with 6mm ply board and finishing with dulmica including all locking arrangements and hydraulic hinges of approved brand as per the directions of site Engineer. (complete Job)

Providing & Fixing of 12mm thick imported wooden wall panelling including cost of 12mm thick plywood in frame work and nails , screws and all carriages complete.

Providing & Fixing of 12mm thick laminated wooden flooring of 1st quality including cost of matching cornice and all carriages complete.

Providing and fixing of wooden cornice of 40mm x40mm size as directed by EIC complete.

Providing and applying varnish polish two or more coats of approved brand and manufacture complete.

Providing and applying white cement based putty 2mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of priming coat.

Applying one coat of water thinable cement primer f approved brand and manufacture on wall surface including all carriages and cost of material.

Painting with plastic emulsion paint of approved brand and manufacture to give and even shade including scaffolding charges all complete.

Providing and fixing water closet squatting pan ( Indian type) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing ceramic glazed wall tiles (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:3 (1 cement :3 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing ceramic glazed floor tiles 300x300 mm or above (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing of water heater (Gyser) of approved / standard quality of 50 ltrs capacity complete.

Providing and fixing C P fittings / fixturesof approved brand complete JOB. (As approved by the EIC at site) Jaquar or equivalent.

C P Bib Cock long nose

Wall mixer

C P Angle valve

Health faucet

Towel rail

100mm size grating

Soap case

C P Ring

PVC Connection pipe

Looking Mirror (standard make)

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Silver / KD wood.

Providing and fixing paneled or paneled and glazed shutters for doors/ windows/ clerestory windows using 10kg/ sqm 4mm thick float glass panes including ISI marked M S pressed butt hinges bright finished of required size with necessary screws. 30mm thick Silver / KD wood.

Providing and fixing of 12mm thick laminated board paneling material complete including cost of wooden beading and nails etc for fixing frames complete.

Providing and fixing of PVC soil waste and vent pipes of approved brand and manufactures (Type-B) including jointing with adhesive complete.

100mm dia

75mm dia

Providing and fixing of fitting to PVC soil of approved brand and manufacture complete

100mm dia Door Junctions

100mm dia Plain bend

75mm dia Plain bend

75mm Floor trap

P/F wash basin with pedestal C.I. / M.S. brackets, 15mm C. P brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 530x430mm with a pair of 15mm C. P. brass pillar taps.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on wooden surface. including all carriages and cost of material involved.

Providing and fixing of Hardware fittings / fixtures of approved brand and manufacture (as directed by EIC)

Aldrop8”

Chromium Plated Hand 6”

Chromium Plated Tower bolt 6”

MOHAMMAD ASHRAF RATHER

MR. NADEEM BASHIR NAJAR