Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.4 Cr
EMD Value
₹4.4 L
Closing Date
8 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Renovation work of the Paradip Port Authority Administrative Office at Paradip.
NBCC/SBG/OD/CG/PPA/NIT/23-24/19
NBCC/SBG/OD/CG/PPA/NIT/23-24/19
Open Tender-Domestic
Civil Works General
Jagatsinghapur, Odisha
₹11,800
₹4.4 L
8 Feb 2024
25 Jan 2024
8 Feb 2024
8 Feb 2024
17 Feb 2024
providing and laying factory made chamfered edged cement concrete
paver blocks in footpath, park lawn, drive way or light traffic parking
etc. M30 strength and 80 mm thick ,made by table vibratory method
using PU mould , laid in required colour & parten over 50 mm thick
compacted bed of sand , compacting and proper embedding /laying
of inter locking paver blocks into the sand bedding layer throught
vibratory compaction by using plate vibrator, filling the joints with
sand and cutting the paver blocks as per required size and partern,
sweeping the surface etc all complete with supply of material, labour
, t&P taxes tollage etc all complete as directed by EIC.
B Earthwork Excavation
Earth work in all kinds of soil within 50m lead and 1.5m lift including
rough dressing and breaking clods to maximum 5cm. To 7cm. And
laying in layers not exceeding 0.3m in depth and as per specification
Cement concrete of proportion (1:4:8) in foundation and floors using
4cm size clean hard black crusher broken granite stone metal of
approved quality and from approved quarry including hoisting,
lowering and laying concrete in layers not exceeding 15 cm. (6")
thick to the required level ramming, watering, curing etc. complete
including cost, conveyance, royalties and taxes of all materials with
all labour and T&P required for the work etc. complete in all respect
and as per the direction of the Engineer-in-charge.
Providing and fixing at or near ground level cement concrete M-25
grade in kerbs, edgings etc. as per approved pattern and setting in
position with cement mortar 1:3 (1 Cement : 3 coarse sand),
including the cost of required centering, shuttering complete.
10 External Painting
Painting Two coats over a coat of cement paint & Water Bound Wall
PARKING SHED WORK
Descriptiopn Unit Qty Rate Amount
Earth work in all kinds of soil within 50m lead and 1.5m lift including
rough dressing and breaking clods to maximum 5cm. To 7cm. And
laying in layers not exceeding 0.3m in depth and as per specification
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers of 0.3 mtr, with top surface
dressed and leveled to proper gradient including cost of all
materials, conveyance, all taxes and royalties, loading and unloading,
including cost of all labour, sundries, T & P etc. All complete as per
directions of the Engineer -in-charge.
Cement concrete of proportion (1:4:8) in foundation and floors using
4cm size clean hard black crusher broken granite stone metal of
approved quality and from approved quarry including hoisting,
lowering and laying concrete in layers not exceeding 15 cm. (6")
thick to the required level ramming, watering, curing etc. complete
including cost, conveyance, royalties and taxes of all materials with
all labour and T&P required for the work etc. complete in all respect
and as per the direction of the Engineer-in-charge.
C.C. M25 for R.C.C. works using 20mm and 10 mm size C.B.G. chips
for all floors, foundation & plinth etc. of approved quality, mixing
with a concrete mixture as per approved design mix, hoisting, laying,
compacting with40 to 60 neddle vibrator, curing with cost and supply
of all materials, labour, T&P, taxes, tollage, royalties,etc. all complete
as directed by Engineer-in-charge.
Shoring and shuttering for foundation trenches, pits etc. with supply
of 38 mm thick non sal planks for poling boards and 10 mm thick
non sal planks for walling and 125 mm dia non sal bullah for struting
including putting close the wooden planks sheets for protection of
excaveted earth pit with supply of all labour materials T&P, taxes,
tollage, royalities etc all complete as directed by EIC .
Supply Tor/TMT Steel of Fe-500 confirming to IS-1786 including
cutting, straightening, bending, binding & placing the grills in position
for RCC works binding the grills with binding wire of 18 to 20 gauge
including supply of steel, labour, materials, transportation charges,
T&P, taxes, etc. all complete as per the direction of Engineer-in-
Supplying, fitting & fixing of precoated Galvolume metal sheet or its
equivalent of 1000 mm width with total coated thickness of 0.5mm.
for roof approved quality, drilling hole fixing of wind tie and ridges or
valley including supply of all EPDM screw, ridge pieces, eve board,
wind ties, cutting the sheet to proper profile with supply of all
materials, labour, transportation, loading and unloading at both
ends, T&P, etc. all complete as per the direction of Engineer-in-
Providing fitting and fixing the fabricted MS structures( 80mm x
80mm x 3.0mm)after cutting, bending, making holes, jointing
,welding as per requirement and Hoisting fabricated structurals,
18 placing in position as per the drawings or as directed with supply of qntl 143.4 9553.61 1369987.67
labour and material,machinery, cost of fuel, electrode, gas,
consumables hire and running charges of all kind of equipments etc
all complete as per direction of Engineer-in-charge.
Cutting the shrubs, bushes, cleaning, removing & disposing the
debrises away from the site by Private Vehicles with all leads and lifts
including levelling, dressing the ground with supply of all labour, T&P,
taxes, hire and running charges of vehicles including fuel,
consumables, tollage etc. complete as directed by the Engineer-In-
Fine dressing and turfing with initial lead of 50m and 1.5m initial lift
as per direction of Engineer-in-charge.
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to
60mm thickness of existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and than rolling the surface
with light roller make the surface smoothen and light waterning with
sprinkler and maintenance for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing and stacking of Duranta Golden, having ht.15 to 20 cm
4 bushty shape with fresh and healthy leaves in 15 cm size of Earthen Each 11851 23.6 279683.60
Pot / Plastic Pot & as per direction of the officer-in charge
Descriptiopn Unit Qty Rate Amount
Providing and Displaying Acalypha red well developed with fresh &
5 healthy 30 to 45 cm ht. in20 cm size Earthen Pot/ Plastic Pot as per Each 10929 48.38 528745.02
direction of the officer-in-charge.
Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m
with 8 to 10 suckers, well developed, fresh and healthy with lush
green foliage in 30 cm size of Earthen pot/Plastic pot & as per
direction of the officer-in-charge.
Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m
with 4 to 5 suckers, well developed, fresh and healthy with lush
green foliage in 25 cm size of Earthen pot/Plastic pot & as per
direction of the officer-in-charge.
Complete maintenance of the entire garden features having as per
yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge,
flower beds, foliages, creepers etc. including hoeing, weeding,
pruning, replacement of plants, gap filling, watering, mowing of lawn,
grass cutting by lawn mover and brush cutter, removal of garden
waste, applying insecticide, pesticide & fertilizers (whenever
required) top dressing of lawn with good earth and manure and
maintenance of other garden related works as directed by office-in-
charge (Cost of GoodEarth, Manure, Fertilizer, Insecticide, Pesticide
will be provided by the Department & lawn mover and brush cutter
with fuel and other T & Pmaterial/articles shall be provided by the
contractor.) and as per direction of officer in charge.
D PHE Estimate
1 PP SCREEN FILTER 2"-25M3 KP120 MESH-IND NOS. 1 3394.27 3394.27
2 PRES.GAUGE SS 304 0-7KG 1/4 BSP 2.5"-IND NOS. 2 396.5 792.96
3 AIR VACUUM RELEASE VALVE AV10-1" RV-IND NOS. 4 504.2 2016.84
4 PRV & REDUCING VALVE PR 0.5-5.5BAR TH NOS. 1 11210.0 11210.00
B FIELD UNIT (EXCLUDING PVC UNIT)
1 HT-KPRS PROSPORT LONG RANGE GEAR DRIVEN ROTOR NOS. 50 3528.2 176410.00
2 PVC SWING JOINT 1" NOS. 50 843.7 42185.00
3 PVC SADDLE 63X1" 6KG NOS. 50 177 8850.00
4 PP BALL VALVE 2.5"(75MM) PLAIN-IND NOS. 5 1207.73 6038.65
5 PP BALL VALVE 2.0"(63MM) PLAIN-IND NOS. 2 763.46 1526.92
C FIELD UNIT (PVC UNIT ONLY)
1 PVC PIPE 75MM -6KG/CM2-FINOLEX/SUPREME BRAND MTR. 210 214.76 45099.60
2 PVC PIPE 63MM-6KG/CM2-FINOLEX/SUPREME BRAND L/S 672 174.64 117358.08
FITTING & ACCESSORIES (As Per Actual) 1 17700 17700.00
D SERVICE UNIT
1 TRANSPORTATION CHARGES L/S 1 5900 5900.00
2 INSTALLATION & SUPERVISION CHARGES L/S 1 17700 17700.00
E Electrical Estimate
EXTENAL LIGHTING
A Fan, indoor & outdoor Fixtures
1 Post top Lights
Supply of LED Post Top with a system lumen output of 3500 lumens
and a minimum system efficacy of >90 lm/W. The luminaire shall
have a rated system lifetime of 25,000 burning hours at L70. The
luminaire should have a color temperature of 4000K and CRI > 70.
The luminaire shall meet IP65 with THD < 20% and PF > 0.9. The
luminaire shall have closed diffused optics with polycarbonate
diffuser board. The fixture is similar to Bajaj (CAT No:BGCTNP 40W
LED WH) or Equivalent of Crompton/ Unilux . This is including cost of
all material, conveyance, royalities as directed by Engg-in-charge all
Installation of LED post tops includes preparing designing & erecting
a foundation in the ground with anchor bolts to suit the fixing of base
plate, fixing of post top on foundation using anchor bolts & the base
plate. The contractor shall ensure all post tops installed are in line
Pole height: 2.5 to 3 m above ground level.
Body of the pole: Hot dip GI with matt finish & 70% grey/black color
or as specified by EIC.
Junction Box: Inbuilt with MCB, connector etc.,
Desired output lux level:15(+/-3)
Protection: IP65 class I
Voltage range : 210-270
Colour temprature : 5700K (neutral) Nos 65 26039.06 1692538.90
2 Single Arm Street Lights:
Descriptiopn Unit Qty Rate Amount
Supply, erection, testing & commissioning of road lighting HDG
Octagonal Pole conforming to IS 875 and BS EN ISO 1461 & 410 SP
33 of 7.0 meter with base plate drilling of 1" dia hole on the upper
portion of the pole for the installtion of street light and 1" dia hole on
the lower portion of the pole for entry of the wire Base pole paintng
of red oxide and two coats of black enamel paint. The poles shall
have extra provided and fixed with 4'x2' dia being erected by laying
5'x2'x2' (length, breadth and width) cement concrete block in the
ratio 1:3:6 and block be continued up to 1 feet above the ground
level i.e 4 feet below ground level including surface plastering the job
including excavation of pole with 4 feet deep and refilling the same
after installation of the pole and with holes at top of the pole for
fixing ring type single armed GI braket for the installation of the
integral flood light luminaire
of 72 watt. The Dust and wheather proof gasket using for
250mmx200mmx150mm deep box nominal size of 16 SWG thick MS
sheet cable looping box with the existing pole with MS clamp made
out of 25mmx3mm thick flat iron with suitable nuts and bolts
complete with hinged cover and locking screws earth studs neoprene
gasket suitable for Nos 4 pole mounted including supply and fixing
one no 6 Amp MCB carrier with base and 4 way 60 Amp terminal
block suitable to receive PVC armoured cable fixed on suitable size
Baketillte sheet base complete connection through GI pipe (classB)
40 mm dia Nominal 1.5 mtr length along the pole or protection of
underground cable (on vertical run) with painting all complete as the
direction of EIC.
3 Flood Lights
Supply, installation, testing & commissioning of 35 watt integral flood
light with driver inside a PDC housing Led Light with aluminium die
cast housing luminaire with unique lens system for uniform
illumination and toughened glass with silicon gasket for IP-66 Nos 15 14464.44 216966.60
protection along with CC/bricks pedestal & loose wire box (or
connectors 50 MM Dia 4 mtr Height GI Tubular Pole with one 6A
MCB) for loop in loop out type as required.
Single Armed All in One integrated Solar LED Street Lighting
Supply, installation, testing & commissioning of Single Armed Hybrid
All in One integrated Solar LED Street Lighting along Row of Street
light (30 watt Fixtures with 6.0 meter octagonal GI Pole with base
plate drilling of 1" dia hole on the upper portion of the pole for the
installtion of street light and 1" dia hole on the lower portion of the
pole for entry of the wire Base pole paintng of red oxide and two
coats of black enamel paint. The poles shall have extra provided and
fixed with 4'x2' dia being erected by laying 3'x2'x2' (length, breadth nos 10 101657 1016570.00
and width) cement concrete block in the ratio 1:3:6 and block be
continued up to 1 feet above the ground level i.e 4 feet below ground
level including surface plastering the job including excavation of pole
with 4 feet deep and refilling the same after installation of the pole
and with holes at top of the pole for fixing ring type single armed GI
braket for the installation of the integral flood light luminaire of 30
Supply, installation, testing & commissioning of step light for WALL
as 9W , 3000 K required as per direction of Engg.-in-Charge
6 Outdoor LED Strip Light
SITC of IP 68 Non-integral flexible LED strip light,High optically
efficient diffuser, 3000K with 12 w/mtr @ 5Mtr pool with Driver nos 81 3886.92 314840.52
extra as required as per direction of Engg.-in-Charge
7 Spike / focus Lights
Supply, Installation,Testing & commissioning of IP-65, LED Garden
Spike Light including 1 no. of 9 watt LED luminairs & Basewith
BrickMasonry work(200x200x200)mm for the above fitting as per
EIC of approved make including with all, materials & labour.
8 Static Column type Bollards Light
Supply, installation, testing & commissioning of 40W STATIC
COLUMN Bollards Light with other necessary arrangements like Nos 12 39775.44 477305.28
Pedestal, JB with 6 Amp DP, 10 KA, C-Curve MCB & connector etc.
9 Gate Lighting
Supply, installation, testing & commissioning of 40W Gate Lighting
with other necessary arrangements like Pedestal, loose wire box & Nos. 6 10962.2 65773.20
connectors etc.
10 Coop Burried Lights
Descriptiopn Unit Qty Rate Amount
Supply, installation, testing & commissioning of 6W Coop Burried
Supply, installation, testing & commissioning of 9W STATIC COLUMN
Bollards Light with other necessary arrangements like Pedestal & Nos 89 9427.02 839004.78
12 2 way Up/Down Light
Supply, installation, testing & commissioning of 2X8W LED 2way
Up/Down Light including all other accessories & labour etc as per Nos 40 3383.06 135322.40
13 Aviation Lighting
LED Aviation light luminaries including required driver/ control box,
protections, above the highest point of terrace level and making good
the same. It should switch ON automatically as required in night time Nos 2 4095.78 8191.56
& OFF in day time including FRLS copper control wiring etc. complete
in all respect as required & as approved by the Engineer Incharge.
Supply, installation, testing & Commissioning of 7.0 M mini housing
made up of pressure die cast aluminum Alloy with effective thermal
management,sturdiness and embossed brand name/logo name of
manufacturer Octagonal mast shaft in single section suitable for 50
m/sec wind speed along with head frame, luminaires carriage
suitable for 04 luminaires in symmetrical arrangement and other
accessories manufactured in factory having provisioning of raising
lowering system comprising double drum winch, 5mm diameter SS
wire rope, trailing cable, connector, integral power tool motor,
manual handle, junction box, lightning finial. Including Wiring
material from JB to individual luminaire & MCB in base compartment.
Supply & fixing of foundation bolts manufactured from special steel
along with nuts, washers, anchor plate and common template with
holes at top of the pole for fixing ring type four armed GI braket for Nos 0 260153.42 0.00
the installation of the integral flood light luminaire of 50 watt . The
Dust and wheather proof gasket using for 250mmx200mmx150mm
deep box nominal size of 16 SWG thick MS sheet cable looping box
with the existing pole with MS clamp made out of 25mmx3mm thick
flat iron with suitable nuts and bolts complete with hinged cover and
locking screws earth studs neoprene gasket suitable for Nos 4 pole
mounted including supply and fixing 16A TPN MCB incomer, single
dial time switch, 16A TP contactor for the automatic switching of
luminaries, power tool control with 2 no 9A contactors with painting
all complete as the direction of EIC.
16 External Feeder Pillar for External Lighting
Design, Supplying, Installation, testing and commissioning of 415 V
feeder pillar panel compartmentalised, factory made Godrej Almira
type suitable for outdoor installation, made up of CRCA sheet steel of
thickness not less than 2 mm with a weather proof canopy of top,
double door construction, IP 54 protection, anti corrosive chemical
resistant paint with, automatic dawn and dusk with astronomical
controller for street light outgoing, , complete with Aluminium bus
bars, inter-connection with solid/ stranded copper conductor wires/
copper strips, glands neutral links, etc., and mounted with following
switch gears, etc., complete as required with detailed specifications: ,
energy saver for automatic switching ON/OFF as per pre-sets time
cycle, digital multifunctional meter and suitable CT etc., including
concrete pedestal and associated civil works.
Busbar-200 Amp Al busbar with neutral bus SC rating of 25 KA
suitable for operation at 415 Volt, 50 Hz, 3 Phase supply
One (1) - 160A,TPN, 25KA,MCCB Incomer
One(1) set of – 160/5A , 15VA , CL 1.0, CT
One Set ON/OFF Indicating lamp with control fuse/ MCB.
one set of Contactor & Digital Timer with incomer side.
4 Nos - 32 Amp TP MCB Outgoing
10 Nos - 16 Amp TP MCB Outgoing
2 No.s - 16 Amp DP MCB with 6/16 Amp socket outlet with 10 Amp
modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
Supply & Fixing of Copper plate Earthing (600x600x3mm thick)
including accessories, and providing masnory enclosure with cover
plate having locking arrangement and watering pipe of 2.7 meter
long etc. with charcoal/coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI
23 pipe from earth electrode including connection with brass nut, bolt, Mtr 100 1444.32 144432.00
spring, washer excavation and refilling etc. as required.
Descriptiopn Unit Qty Rate Amount
Providing and fixing 25 mm X 5 mm dia copper strip on wall/surface
or in recess for connection etc. as required.
Providing and fixing 4.0 mm dia cu wire on surface or in recess for
loop earthing as required.
F Flag-Post Foundation Work 0.00
1 Earthwork Excavation 0.00
Earth work in all kinds of soil within 50m lead and 1.5m lift including
rough dressing and breaking clods to maximum 5cm. To 7cm. And
laying in layers not exceeding 0.3m in depth and as per specification
2 Sand Filling
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers of 0.3 mtr, with top surface
dressed and leveled to proper gradient including cost of all
materials, conveyance, all taxes and royalties, loading and unloading,
including cost of all labour, sundries, T & P etc. All complete as per
directions of the Engineer -in-charge.
Cement concrete of proportion (1:4:8) in foundation and floors using
4cm size clean hard black crusher broken granite stone metal of
approved quality and from approved quarry including hoisting,
lowering and laying concrete in layers not exceeding 15 cm. (6")
thick to the required level ramming, watering, curing etc. complete
including cost, conveyance, royalties and taxes of all materials with
all labour and T&P required for the work etc. complete in all respect
and as per the direction of the Engineer-in-charge.
C.C. M25 for R.C.C. works using 20mm and 10 mm size C.B.G. chips
for all floors, foundation & plinth etc. of approved quality, mixing
with a concrete mixture as per approved design mix, hoisting, laying,
compacting with40 to 60 neddle vibrator, curing with cost and supply
of all materials, labour, T&P, taxes, tollage, royalties,etc. all complete
as directed by Engineer-in-charge.
5 Centering & Shuttering
Shoring and shuttering for foundation trenches, pits etc. with supply
of 38 mm thick non sal planks for poling boards and 10 mm thick
non sal planks for walling and 125 mm dia non sal bullah for struting
including putting close the wooden planks sheets for protection of sqm 22.00 1299.3 28584.60
excaveted earth pit with supply of all labour materials T&P, taxes,
tollage, royalities etc all complete as directed by EIC .
6 Reinforcement work
Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of
Fe-500 confirming
to IS-1786 including cutting, straightening, bending, binding &
placing the grills in position for RCC works binding the grills with Qntl 9.90 8926.2 88369.38
binding wire of 18 to 20 gauge including supply of steel, labour,
materials, transportation charges, T&P, taxes, etc. all complete as
per the direction of Engineer-in-charge.
G Flag Post Installation
Design, Supply, Installation & Commissioning of 30.50mtr (100 feet) nos 1153900.52
1 high National Flag Mast at Paradip Port Trust Campus, Jagatsinghpur 1 1153900.52
2 Civil Foundation work nos. 1 185500.9 185500.90
H Sculpture made out of scrap waste
Supply and installation of sculpture made out of scrap waste in the
campus ( Anchor)
I GFRP Sculptures
1 GFRP Sculptures for external beautification ( Single Hand) nos 6 177000 1062000.00
GFRP Sculptures for external beautification ( Multiple Hand)
J Cane Furniture & Side Pole Umbrella
Sit out arrangements consisiting of cane or wooden chairs with side
pole umbrella at terrace
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
01 NIT 19.pdf
Tender Document
02 BOQ.pdf
Tender Document
03 SCC.pdf
Tender Document
04 Milestone.pdf
Tender Document
05 LIST_OF_MAKES.pdf
Tender Document
06 GCC with upto date amendments.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .