REPAIRS TO SABHAPATI and Dy. SABHAPATI,Dy.ENG. CHAMBER AT-PANCHAYAT SAMITI KARMALA Tal-KARMALA, Dist. SOLAPUR

Providing & Fixing Table top Glass of 12mm thick as per detailed drawing & design, wherever necessary etc. complete.

Providing & Fixing Table top 12mm thick ply & 15 mm thk. glass,embosed in table at top & All Vertical members are in 18mm thick ply . Drawers are Made in 12mm thick ply, edges of 20 mm thk., front side with frosted glass, ply work finished in laminate 1.5 mm thk. From outer side & inner side with 0.8 mm laminate with approved shade as per detailed drawing & design, with S.S. hardware like hinges, legs, finishing the wood work with polishing & 3 coats of painting wherever necessary etc. complete.

Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)

Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding,preparing the surface.(excludingprimercoat)etc. complete

Providing and fixing plain zinc sheeting of 0.80 mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing in position(asper1868/1982)Aluminium sliding window of three tracks with rectangular pipe95x38.10x0.90mm at weight 0.637Kilogram/One Running Metre.with window frame bottom track section92x31.75x1.30mm at weight 1.070Kilogram/One Running Metre..Top and side track section 92x31.75x1.30mm at weight 0.933Kilogram/Runningmetre. The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417Kilogram/One Running Metre.Interlocking section 40x18x1.10mm at weight 0.469 Kilogram/Running metre.and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre.As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with allr equired screws and nuts etc, complete. With colour Anodising without box

Supplying & errectiing PVC Trunking ( pvc casing-n-capping) of size 25 mm with accessories on wall/ceiling as per Spefication .No.WG-MA/Con (1-2-7)