REPAIRS TO TOILET, PLUMBING WORK, SOIL AND WASTE PIPE, CEILING AND UPKEEP OF JOINERIES AND FLOORING IN OTM AND MD ACCN AT WING V ATRY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

Dismantaling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in any type of soils

Returning filling in, including spreading, leveling , watering & well ramming in layer n exc 25 cm as in soft/loose soils

Removing excavated material n exc 50m & depositing where directed at a level n exc 1.5m above the staring point as in soils

M&L for cement concrete type B-1, 1:2:4 (20 mm graded agg) 40mm thick as a sub base.

M&L for cement concrete type B-1, 1:2:4 (12.50 mm graded agg) 25mm thick as a sub base.

Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete roofs, including flashings and junction of parapets, etc., and surface painting, with a layer of water proofing solution (area of flashings, etc., shall be added to the roof area) except waterproofing chemical/Bitumen complete all as speified and directed.

M&L for applying evenly a coat of water proofing chemical of FOSROC at the rate of 1.50 kg per square metre or as per manufaturer's instructions on prepared surfaces of concrete roof

S&F for tubes of dia 25 mm medium grade, galvanized with iron all fittings fixed through walls and laid in floor of sizes complete all as specified and directed in spouts in Sunken slabs.

M&L Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

M&L Machine cut Pre polised Kota stone slab 16-18mm thick in riser of steps, skirting over cement screed and jointed with pigment to match the shade of the slab including rubbing, polishing complete all as specifed and directed Note : Cement mortar screed bed layer/backing coat plaster shall be measured & paid separately

S&F Hand cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L Non Skid ceramic tiles 7 to 8 mm thick joint free coloured tiles area of each tile exc 0.18 sqm but not exc 0.36sqm in floors set and jointed in neat cement slurry complete all as specifed and directed

M&L for rendering 10mm thick in CM 1:3 as in backing coat plaster on surfaces of stone masonary surfaces complete all as specifed and directed

M&L for glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and exc 50mm but n.exc 100mm deep

M&L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

Ditto as per item 25 above but except material

Taking up or down tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed

(a) 25 mm dia

(b) 20 mm dia

(c) 15 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

(a) 25 mm dia

(b) 20 mm dia

(c) 15 mm dia

S/F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

(a) 25mm dia

(b) 20 mm dia

(c) 15 mm dia

S&F in repair vitreous china bowl urinal flat back size 465x355x265mm white with grating, spreader, union and Flush/discharge pipe complete all as specifed and directed

S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size410mmx330mmx160mm complete all as specifed and directed

S&F in repair stainless steel sink made of stainless steel 1mm thick with drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size410mmx330mmx160mm complete all as specifed and directed

S&F in repair cast iron Nhani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F in repairs 15 mm bib taps Chromium Plated, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F repairs Pillar taps standared of PTMT 15mm bore dia any colour screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 110 gms) complete all as specified and directed

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces or surfaces other than fair faces of brick work and finishing even and smooth with sagol finish complete all as specifed and directed

M&L for applying two coat of oil bound distemper on walls over a coat primer complete all as specified and directed by EIC.

M&L for applying three coats of white wash on walls including preparation of new plastered surfaces complete all as specified and directed

M&L rendering 15 mm thick cement mortar on stone surfaces other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed

Supply only liquid water proofing compound

M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed

M&L for rendering 05 mm thick (1:6) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L three coat of white wash including preparation of new surfaces on ceilings complete all as specified and directed by EIC.

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed

M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

Ditto- all as per item No 47 above but except bricks

M&L for walling of random rubble uncoursed, well bonded, bedded to solidly hearted built in cm (1:6) complete all as specified and directed

M&L for keyed pointing of CM 1:4 to random or polygonal rubble;uncoursed or brought upto course

M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed

Dismantlling of water tanks and removing from sites of Exc 250Ltrs but n. exc 500Ltr each

Dismantlling of water tanks and removing from sites of Exc 500Ltrs but n. exc 1000Ltr each

S&F Rotational moulded poly-ethylene water storage tanks of 500 Ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I

S/F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

S&F Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F for Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Taking down 100/75 mm dia PVC/CI sand cast soil, waste and vent pipes, in any length with or without ears etc in any position

S&F PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

S&F of PVC(SWR) bends of any radius

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) branch piece,single(single Y) equal or unequal

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) junction single,(single T),equal or unequal 11mm dia

S&F of PVC(SWR) 'P' trap of 125/110 mm bore

S&F of PVC(SWR) vent cowl of 110mm bore

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.

S/F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union chromium plated complete all as specified and directed

-ditto- but with lonh shank and cup concealed type)

S&F of vitreous china wash basin,white,flat back,size 450x300mm including cutting for and pinning in ends of brackets and waste pipe of 32 mm dia polythelene of low or high dencity or PVC complete all as specified and directed.

S&F for waste fittings,brass,chromium plated of 32 mm dia for wash basins with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site

All as per item No. 75 above but exc. 1.5 Sqm and n.exc. 4.00 Sqm each.

All as per item No.76 above but door shutter exc. 1.00 Sqm and n.exc. 2.00 Sqm each

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed to walls complete all as specified and directed.

S&F (IInd class hard wood) Glazed and ske- leton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

ditto- all as above item no 79 but thickness of shutter30mm complete as specified in SSR Part-I Section8, clause 8.24 (b) all as specified and directed.

S&F IInd class HW 35mm thick plain framed panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 100 mm Butt hinges,medium weight cold rolled mild steel all as specified & directed.

S&F MS barrel tower bolts stove enameled black with bright bolt – 150mm long fixed complete all as specified and directed.

S&F MS pressed handles oval type stove enameled black fixed – 125mm size complete all as specified and directed.

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed.

S&F mild steel steel butt hinges 75mm size medium weight complete all as specified and directed

S&F 100mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete including fixing in repair all as specified and directed.

S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.

Taking down PVC chowkat or frames with shutters (without taking off shutters from the frame) not exc. 2.0 Sqm each. Complete including removing from site by each contractor at his own expense all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S/F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium door shutters, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nombers in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window shutters, side hung/sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

-ditto- but from metal frame including punching or drilling out old glazing pins/springsclips and providing and fixinh new ones.

S&F Sheet glass ordinary quility 3 mm thick nexc 0.5sqm each pane and glazing with oil putty complete all as specifed and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr in Charge

Ditto as per item 107 above but except material

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed

M&L preparation of new steel surfaces of any description over exc 10 cm girth or width and applying two coat of synthetic enamel paint complete all as specified and directed

S&F in repairs 16 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and rectified.

S&F in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in Pelmet boxes or in narrow width n. exc 15 cm each, rebated or flat edged complete all as specified and rectified.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with mixture of white and gray cement in equal proportion and no pigment in floors complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, brass chroium plated complete all as specified and directed by EIC.

S&F for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed by EIC.

S&F Stainless steel kitchen racks of size 1200mm x 900mm x300mm.

M/S MANISH CONSTRUCTION CO

Vinod Enterprises

M/S SAMEER SUBHASH PATANI

Alpha Construction

Apachi Systems

M/S G.S RAWAL