Repairs/ Replacement to perimeter security chain link fencing and sign Board in Sector B under GE(S) Patiala.

Amount

Dismantling posts or struts (wood, steel or RCC) embedded in concrete, brick work masonry etc any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-Charge.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as walls or retaining walls, any thickness, size or shape including pilasters, tresses columns, pillars, boundary pillars and posts including caps and bases)in foundation filling and mass concrete and as PCC band at ground level to hold bottom line complete all as specified and directed by Engineer-in-Charge.

S&F MS fencing posts including cutting tops to shape as directed, drilling holes, notching for wire, etc- and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

S&F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed by Engineer-in-Charge. (Each line of wire to be measured for the purpose of payment).

S&F chain link fencing MS galvanised 3.15mm thick wise 100 x 100mm mesh, fixed in position incl lapping etc complete all as specified and directed by Engineer-in-Charge.

Mild Steel Gd.I, IS 432 (part I) part -I round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concreteand screwing etc. wind ties forroof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc.,and similar work confo Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth when unconnected with other painting and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and 5 to 10 mm dia of shank complete all as specified and directed by Engineer-in-Charge.

Cement concrete 1:3:6 type C-1 using 20mm graded crused stone aggregate as in kerb stone of any type, mud stops, coping, bed plated etc with slight rounded or chamferred edges complete all as specified and directed by Engineer-in-Charge.

M&L in repair for corroson free stainless steel pipe of size75mm outer dia of 2.5mm thick round of grade 321 as in stand including stainless steel frame 3.8mm square bars work with radium tape script for sign board and similar works including cutting bending welding and leg embeded in PCC after excavation complete all as specified and directed by Engineer in Charge.

M&L in repair for high intensity retro reflective sign boards made of hardened stainless steel sheet 2mm thick POP riveted to stainless steel pipe as required. Sign boards should be reflective on both side and overlay film of any colour with computer cut letters in Ebglish and Hindi, height n.exc 15 cm/sign, arrow mark etc and border made of high intensity grade of any colour sheeting and mechanically fixed on stainless steel sheet complete all as specified and directed by Engineer in Charge.

m/s panchmukhi builders

AGGARWAL & CO

Arneja Builders

Buttar Construction Co.

RUPINDER SINGH SODHI