REPAIRS TO ROAD AT DGQA RESIDENTIAL COMPLEX GHATKOPER AND OFFICE COMPLEX AT VIKHROLI AND INSIDE OUTSIDE ROAD OF KMC AND JUHU UNDER GE SANTACRUZ MUMBAI

Amount

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at 5 kg per 10 sqm complete all as specified and as directed.

M & L for bituminous premixed semi dense asphaltic concrete by mechanic paver, 30 mm consolidated thickness using crushed graded stone aggregate mixed with binder content @ 5.5% by weight of total mix using paving bitumen, rolled and compacted to required chamber and gradient with 8 to 12 tonne capacity power roller complete all as specified.

M&L for premixed bituminous, macadam over primed surface of road using paving bitumen any penetration, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) . Binder contents of premixed macadam shall be 4% by weight of total mix complete all as specified in SSR and as directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹ 57 per kg.

S & F in repairs road convex mirrors outdoor type made of one piece polycarbonate plastic of size 80 cms dia, outdoor type, mounted on steel frame including all fixing arrangements and necessary foundations (300mm X 300mm X 450 mm with M15 using 20mm graded stone aggregate) complete all as specified and as directed.

S & F in repair Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engineer-in-charge.

S&F in repair Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mod complete all as specified and directed

S & F in repairs of speed bumps breakers made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistance moisture and temperature including fixing using anchor bolts and epoxy mortar grout complete all as specified and directed.

S & F in repair sign board made of retro reflective Type IV high intensity prismatic grade sheeting in any color and size with including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets as per IRC 67-2012 including SS 304 Sch 10S Pipe of dia 50 mm, suitable height and 4mm aluminium composite material grade including required clamps, embedded in below ground level including excavation and PCC M15(Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 300mm X 300mm X 450 mm and making good surface all as specified and directed. Note : Earth work and PCC in foundations shall be inclusive of rates quoted by contractor. Clear height of board from ground level 1.2 m. The unit measured for payment shall be as per area of sign board sheet.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. →

M & L for repairs to pot holes any depth and n. exceeding 1 Sqm each including sweeping, free from dust and mud water scouring sunken surfaces in black top, road, path etc, cutting around edges to at least 25 mm in depth and making good by applying tack coat using paving bitumen at the rate of 5 Kg per 10 Sqm putting in premix as specified for thin bituminous carpet 2 cm thick and well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n. exceeding 30 mm).

S & F in repairs factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

MUKESH CONSTRUCTION CO (BID ID -3304503)

R.R.Construction.Co (BID ID -3303429)