Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹18.0 L+₹2.4 L (15.5%)Rejected-AOC 84 POLO HILLS OPPOSITE SBI BRANCH EAST KHASI HILLS SHILLONG MEGHALAYA 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L2 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (AF) Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
CA NO. GE(I)(AF)/SHL/ OF 2022-23 PROVN OF CONCERTINA COIL ON GROUND AND ASSOCIATED WORKS INSIDE THE PERIMETER WALL AT CANTT-19 AT HQ EAC (U), AF UNDER GE (I) (AF) SHILLONG
2022_MES_563908_1
8057/22/SHL/2022/23
Open Tender
Civil Works
Item Rate
180 days
Shillong
For Enlisted Contractors Class E Category a i and for unenlisted contractors meeting enlistment criteria for required Class and Category
7 documents required · 7 mandatory
₹500
GE (I) (AF) Shillong
₹40,000
Yes
27 Dec 2022
18 Nov 2022
16 Dec 2022
18 Nov 2022
14 Dec 2022
2 Dec 2022
18 Nov 2022 - 25 Nov 2022
Amount
Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same.
Demolition of ashlar facing dressed stone work, brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc and removal all rubbish material complete all as specified directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in any position not otherwise specifically provided for and removal all rubbish material complete all as directed.
Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed.
Dismantling wrought iron, or mild steel work of any description not otherwise provided for complete all as directed.
Dismantling existing Galvanised steel barbed wire in fencing in any situation and in any position complete all as specified and directed.
Dismantling existing concertina coil in fencing in any situation and in any position complete all as specified and directed.
Cutting opening through wall (old masonry built in cement mortar) for door, window and other openings (with or without reveals) or enlarging existing openings or cutting out defective masonry for under pinning including providing, fixing and removing, shoring, cleaning and stacking store and removing surplus to store and rubbish off the premises etc complete all as specified and directed.
Supply only integral water proofing liquid complete all as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth or not exc 10sqm on plan and exc 1.5 m & n. exc 3.0m in depth & getting out,for foundation etc or for shafts wells, cesspits, manholes pier holes, sewage line etc in Soft/loose soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil complete all as specified and directed.
Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, seismic and other similar bands copping/cills, bed block for embedding hold fast etc including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as directed .
M&L for pre-cast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.
M & L Reinforced cement concrete Design Mix M-25 grade with 20 mm graded stone aggregate as in foundation including rafters footings foundation beam plinth beam bases for column etc basement slab under reamed piles and mass concrete complete all as specified and directed.
M & L for Reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in columns, pillars piers, posts & struts etc complete all as specified and directed.
M & L Reinforced cement concrete M-25 grade with 20 mm graded aggregate beams, cantilever, bressummers, lintels over 1.5 m span complete all as specified and directed .
M & L for Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.
M & L for Use and waste of flat formwork to sides of pillars (square, rectangular or polygonal), posts, struts, piers,columns and stanchions for rough finished surfaces of concrete complete all as specified and directed.
M & L for Use and waste of flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.
M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M & L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers & binders, cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S & F mild steel work conforming to Fe-290 Gde E-165 as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specifed and directed.
S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line of wire to be measured)
S & F concertina coil razor tape barbed wire (reinforced barded tape) of the following specification:- (i) Dia of coil when un stretched 600mm (ii) No of circles 5 Per Rm (iii) Weight of each coil 9.5 to 10 KG (iv) Coverage per coil 8 RM (v) Central core wire:- Made from high tensile spring steel core wire confirming to IS-4454 duly hot dipped galvanised (Confirming to IS-2629) with dia meter 2.59mm + 0.05mm, UTS 145-160 Kg/Sqmm, Zinc coating 250-300 Per Sqm (vi) Strip:- Electro galvanised steel strip 0.5mm + 0.02mm thick, width 19mm (before wrapping on central core wire) confirming to IS-1573, Zinc coating-120 gm/ Sqm and bituminised dipped, width of barbs 11.5mm, pitch of barbs 25.4mm + 0.2mm (vii) Clips:- AISI 304-1.5mm thick C and U clips (C special type for fixing coil and RBT wire U clips special type for joining one coil to another coil and RBT wire to RBT wire joining) (viii) No of clips 125 for each coil (ix) Handle and spikes to be provided as required Make:- 1. MORRIS BALFOROUR & CO TELE No. 033-2233-1204, 2230-9846 2. GLOBAL FENCING WORKS MUMBAI TEL No. 23859-454-23857-374 or any other equvalent makes as approved by the Accepting Officer. NOTE:- Running length of the wall shall be measured for purpose of payment.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick masonry/concrete surfaces, mixed with water proofing liquid @ 150ml per 50 Kg bag of cement and finished even and smooth without using extra cement complete all as specified and directed. (Note :- Supply only Water Proofing Liquid shall be measured and paid separately)
Material and labour for preparation of newly plastered surfaces of wall, applying a coat of 1mm thick wall care putty and applying two coats of weather proof acrylic paint over one coat of exterior grade acrylic primer complete all as specified and directed. Make-Apex Ultima of Asian, weather shield MAX of ICI/Dulux, weather coat long life of Beger, Acroguard 3X of Acro paint.
M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M/s B.Citymai Syiem
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .