PROVN OF DRAINAGE WORK, SOLAR WATER PLANT, SPECIAL REPAIR OF VINTAGE LIGHT AND CERTAIN BUILDING UNDER AOR OF GE 874 EWS

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls complete all as specified and directed.

M&L for 4mm thick Veneered decorative plywood, grade -1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed.

M&L for 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

S&F clean swan batten at 30 cm centres exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails complete all as specified and directed.

M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

All as per item No 10 above but fixing only.

Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.

All as per item No 12 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed.

M &L for Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed,

S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed.

M & L for walling of random rubble uncoursed well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

M&L for brick work with old size bricks, straight or curved on plan exc 6m redius, in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (external surfaces) WPC shall be measured and paid separately) complete all as specified and directed.

Supply only approved integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint old wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down chowkhat or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter without taking out shutter complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down shutters n, exc 1 Sqm each complete all as specified and directed.

Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b). complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; partly glazed i.e. upper panel will be glass pane fitted externally in the clear space & lower panel will be plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification described in SSR Part II.

S & F for factory made fully glazed PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed. Note:- Glass shall be measured and paid separately.

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

M&L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.

S & F mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section complete all as specified and directed.

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S&F for 75mm long stainless-steel butt hinges medium weight cold rolled all as specified

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads. complete all as specified and directed.

M & L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F galvanized iron medium grade tubing with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

M&L for Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842 complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Including dismantling of unserviceable existing tank and removing to store.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm dia bore complete all as specified and directed.

M & L for Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete all as specified and directed.

M&L for Vitreous China squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25-metre-long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity fixed in repair complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed.

S&F in repair Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M & L in repair for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed.

S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and directed. .

S&F in repair Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm dia bore (ISI marked) complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed.

S&F PVC gully trap square or round mouthed type (P) size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed.

M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed.

M&L for Pre-laminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (piano) hinges mild steel, right finish or electro galvanised width of flaps 40mm (when open) complete all as specified and directed.

Demolition of reinforced in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

S&F fixed in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish, waste coupling 32 mm bore of discharge pipe including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe complete all as specified and directed.

M&L for 14 to 16 mm thick green marble slab for kitchen plateform/shelf and vertical faces duly machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing of type including 15mm thick screed bed layer of cement mortar 1:6 complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves etc. complete all as specified and directed.

M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl. cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

All as per item No 93 above, but 6mm to 8mm dia bar complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M&L for PCC (1:3:6), type C-1 using 20mm graded aggregate as in surface channel and drain all as specified.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L foe 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20cm x 20cm and 25mm thick, set, jointed and pointed in neat cement slurry in floors

M&L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Cleaning of drains/septic tank/soakage pit by removing foreign materials / silt/ greasy materials / earth from the drains, removing the excavated material from site and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in any type of soil complete all as specified and directed.

M & L for PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed.

M&L for rendering 15mm thick on brick/stone masonry or surfaces other than fair faces of brick work on one side of lathing in CM 1:4 complete all as specified and directed.

M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed face beds and joints of random rubble walling uncoursed or brought upto course surface n exc.40mm in granite or trap stone complete all as specified and directed.

Removing excavated material n. exc 50 M and deposited where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

PCC for PCC (1:4:8), type D-2, using 40mm graded stone aggregate as in bed of drain pipe 300mm dia (nominal) including packing under and hanuching against the sides of pipe after they are laid and tasted complete all as specified and directed.

S&F Reinforced concrete pipes of 300mm dia class NP3, laid and jointed complete with collars complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:3 on fair faces of RCC surfaces and including applying cement slurry in bottom of slab or ceiling, chajjas, fins & facias etc complete all as specified and directed.

M&L for preparing new surfaces of plastered or unplastered on walls and applying three coats of whitewash complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. completed all as specified and directed.

M&L for point wiring with 1.5 Sq mm multi stranded insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including sunken box rectangular block open recessed cover with 3mm thick plastic laminated sheet cover/ gang box including PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.

All as per description of serial item No 114 here -in -before but for 3-pin socket out let 5 Amps on same board with other switches with continuous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per description of serial item No 114 here -in -before but for 3-pin socket out let 5 Amps on independent board with other switches with continuous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per description of serial item No 114 here -in -before but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std. copper conductor PVC insulated cable 1100 volts grade with continuous continous1.5 Sqmm earth wire.

Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt completed all as specified and directed.

Supply and fixing in replacement of LED 7-Watt Bulb with B22 pin, suitable for fixing in holder as above completed all as specified and directed.

S&F in replacement for decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmissivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement round shape 6-watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600mm x 600mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completed all as specified and directed.

Supply and fixing in replacement of LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ completed all as specified and directed.

S&F in replacement of flush type Switch piano 6 Amps single pole one way completed all as specified and directed.

S&F in replacement of ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked) completed all as specified and directed.

S&F in replacement of socket outlet 2-in-1, 3 pin, 6 Amps flush type (ISI Marked) complete all as specified and as directed.

S&F in replacement of Switch socket combination 5 in 1-, 5- and 15-Amp flush type universal controlled by one switch (ISI Marked) completed all as specified and directed.

S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces completed all as specified and directed.

S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning completed all as specified and directed.

S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning completed all as specified and directed.

S&F in replacement of house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia medium grade, two Nos 900 bends. M.S. hook and stay or guy complete all as specified and as directed.

S&F in replacement of 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal completed all as specified and directed.

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300m completed all as specified and directed.

S&F in replacement of rectification of irregular voltage, voltage stabilizer for automatic operation, single phase and neutral air cooled indoor type & designated for input variation between 90V to 290V with output voltage stabilizer at 230 V with accuracy + 2.5% 4-6 Sec initial delay and of capacity 10 KVA completed all as specified and directed.

S & F in replacement Bell/Buzzer Ding Dong AC 230 Volts, single pole completed all as specified and directed.

S&F in replacement of Bell Push flush Type, 5A single pole one way completed all as specified and directed.

Supply, installation testing and commissioning of solar water heating system suitable for inlet water with chlorine and fluoride content up to 100 PPM and comprising of Solar flat plate collector OR Evacuated or Vacuum tubes collector type Solar Water Heater, collector stand assembly, stainless steel insulated hot water storage tank with heat exchanger of 500 Litres per day capacity with electrical back up with collector "A" size aluminium box collector and comprising of following.

(b) Insulated stainless steel hot water storage tank non pressure type made out of stainless steel grade4 04 Cr 18 NI of IS 1570 (Part-3) -1985 , TIG welded of 500 Liters capacity , non magnetic tank with stainless steel fittings with following specification -01 Nos

(c )Tank shall be insulated with 40 mm thermal grade PU insulation with FRP cladding , Tank stand assembly made of angle of size 38x38x4mm duly pre treated and stove enamelled with black colour paint complete

(d) Provision of electrical back up with minimum 4 KW heating element including providing one No 32 Amps MCB 10 KA rupturing capacity with Metal clad box and top complete

(e) The Solar water heating system shall be provided on Platform on ground made out of PCC and 45 cm in height as per manufacturer direction

(f) Heat exchanger shall be cage type and make of stainless steel tube of grade 04 Cr 18 NI of 07 18 NI of IS 1570 (Par-5) -1885

(g) All other pipe / civil work , connection work for PVC tank, as per OEM recommendation electrical work , outlet and inlet thermometer, Air release valve , check valves , gate valves controls and instruments etc all as required shall be deemed to be included in Unit rate quoted . System internal piping shall be ISI marked GI pipe medium class of IS:1239 duly insulated with 50 mm thick rock wool of 48 Kg / cum density and 26 SWG Aluminium cladding

Notes :-1. The system shall be tested on completion to ensure that 500 Ltrs (as specified) of water at 60 degree centigrade is available in hot water tank on a normal day in cold season.

Makes :- The complete solar water heating system shall be one of the following makes : BHEL, TATA-BP SOLAR Systems, Best and crompton (Chennai), Novel Energy (P) Ltd (New Delhi) , Solar equipment’s Manufacturing CO . (Noida), SOLCHROME SYSTEMS INDIA LTD (PARWANOO-HIMACHAL) , Surya jyoti devices India Ltd (ROPAR-Punjab), V-Guard.

Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal or cylindrical as approved by Engineer-In-Charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position Complete all as specified in SSR Part I.

Supplying, Hoisting and Fixing of Rotational moulded polyethylene water storage tank of capacity of 500 litres (cylindrical/ cuboidal vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position all as specified in SSR Part I.

Supply, fabricate , fixing structural mild steel RS joist , channel , angle iron, flat iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clamps, eye hook and back plate etc fabricated from structural steel section including nuts , bolts, washers, welding (cold and hot ) drilling holes for bolts, bend to any shape or size as indicated and directed , inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed.

Supply & Fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes 25mm bore, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supply & Fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm bore, SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold-water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F Bib tap 15mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or PP-R Pipe including reducer GI or PP-R for brass ferrule and fixed but fancy type complete all as specified and directed.

Material & Labour for Lagging to pipes of 20/25mm bore used in internal/External water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 Complete all as specified and directed by Engr-in-Charge.

M&L for Cutting, threading and joining of existing GI pipe line of 25mm dia and inserting suitable tee for taking branch connection completed all as specified and directed.

Supply and laid in trench/wall/pole/ceiling pipe galvanized 40mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc completed all as specified and directed.

Supply and laid in trench/wall/pole/ceiling pipe galvanized 25mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc completed all as specified and directed.

Supply and laid in trenches pipe galvanized 20mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc completed all as specified and directed.

Supply and fixing 40mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 40mm dia pipe completed all as specified and directed.

Supply and fixing 25mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 25mm dia pipe completed all as specified and directed.

Supply and fixing 20mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe suitable for 20 mm dia pipe completed all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item 154 above but wiring with 4 sqmm copper wire ( FRLSH) and 2.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush type 15/16 Amps single pole one way completed all as specified and directed.

M & L for socket out let 2-in-1, 6 pin 5/6 & 15/16 Amps complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body completed all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings completed all as specified and directed.

Supply and fix LED Bulb 9 Watt completed all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, completed all as specified and directed.

S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve completed all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core including service bracket completed all as specified and directed.

M&L for valve pit of size 90cmx90cmx105cm(internal dimensions) brick masonry construction, including all necessary excavation and earth work in any type of soil, returning filling in disposal of surplus soil to a distance not exceeding 50m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), PCC coping in PCC (1:2:4) Type B-0 using 12.5mm crushed stone graded aggregate, brick masonry in cement (1:4) internally, finished even and fair and pointing flush externally as the work proceeds in the same mortar, mild steel angle iron 50x50x6mm frame, MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS Work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC With two coats of black bituminous paint, complete all as specified and directed.

Taking down existing street light complete with bracket or without bracket to carry out the MES store yard complete all as specified and directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completed all as specified and directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completed all as specified and directed.

Supply and fixing LED flood light 120 watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp completed all as specified and directed.

M&L for of bracket in replacement for fixing of street light fittings bend to shape, made out of 32/40 mm dia GI pipe medium grade upto 1.5 mtr long fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC pipe heavy duty 15 mm dia fixed to pole completed all as specified and directed.

S&F three core PVC insulated and FR PVC round sheathed, copper conductor 1100 volts grade cable of size 1.5sqmm (multistranded) completed all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60cm x 60cm and 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised iron earth lead 4.0 mm dia GI wire by means of bolts, nuts, check buts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1;2:4) type B-1 using 20 mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25mmx25mmx6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75mmx50mmx6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling and removal of surplus soil to a distance not exceeding 50 mtr all per plate No 5 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 16 Sqmm, 4 core in replacement including taking out/down of old unserviceable cable any description completed all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 10 Sqmm, 2 core in replacement including taking out/down of old unserviceable cable any description completed all as specified and directed.

Supply and fix steel tubular swaged poles type 410 SP-31 (9 meter long) complete with CI base plate and finial including foundation and coping completed all as specified and directed.

All as per ser item No 102 above but depth exceeding 1.5 m and not exceeding 3 m.

Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified. Note:- Punned thickness 18 cm shall be measured.

Material and labour for kiln burnt Sub class 'B' bricks laid dry , flat , width wise along the length of cable in trenches after sand cushioning for protection of underground cable complete all as specified and directed.

Cement concrete in bed of poles and stays 1:4:8 type D-2 using 40 mm graded crushed stone aggregate completed all as specified and directed.

Cement concrete 1:2:4 type C-2 using 40 mm graded crushed stone aggregate as in pole coping and stay assembly completed all as specified and directed.

Cement concrete in foundation of poles streets and stays 1:3:6 type D-2 using 40 mm graded crushed stone aggregate completed all as specified and directed.

M&L galvanized iron tube light grade for protection of cable at road crossing of size 40 mm dia.

M&L for factory made sheet metal enclosure out door type fabricated out of 2.4 mm thick CRCA sheet powder coated dust and vermin proof having entry from lower side with cable gland for xlpe cable of size 25/16 Sq mm 4 core with aluminium bus bar three phase and nautral current carrying capacity of aluminium bus bar should be upto 63 Amps mounted on poreclain insulator complete with operating voltafe 415 volts, 50 HZs including one number MCB of capacity 6 amp for street light mounted in sheet enclosure prewired with minimum 1.5 Sq mm copper conductor cable with lugs including locking arrangement complete and enclosure fitting on pole with clamps nuts, bolts and washers complete or all as specified and directed by Engr-in-Charge. (Note: Size of SMC With MCB 16 Amps enclosure and bus bar size as recommed by manufacturer minimum size 350x270 x 200 mm )Make : GSMB 3527 of Sintex or equivalent Tricolite / ASPL

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3140248)

Bidder Name

M/S AB AHAD RATHER

M/S MUNEER AHMAD WANI CONSTRUCTIONS