REPAIR TO BOUNDARY WALL FENCING GATE DRAIN CULVERT PATH IN ZONE-I UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F in MS framed work for such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed.

M & L for preparation of New Steel Painted surfaces of steel and iron work of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over one coat of red oxide complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided and complete all as specified.

M&L for RCC Nominal mix cement concrete Type B1 1:2:4 (20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed.

M & L for RCC Nominal mix cement concrete Type B1 1:2:4 (20mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc all as specified and directed.

M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed

M&L for TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed Note :- weight of binding wire not considered and deemed to included in rate quoted

All as per item no10 above but in stirrups spacers & binders etc complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished flat surface of concrete complete all as specified & all as directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished flat surfaces of concrete in shape all as specified & as directed.

M&L for 18 -20mm thick black granite machine cut, bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for pipe complete all as specified and directed.

Suppiled and fixed in repair for stainless steel 10mm thick of 300mm in height/length letter/Number of any shape in english or hindi,fixed on vertical surface as in gate piller or flag posts, complete all as specified and as directed by the Engr-in-Charge.

M&L in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed.

M & L for 15 mm thick rendering in two layers on fair faces of brick or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concreate surfaces and second layers 5 mm thick with cement mortar 1: 4 with mixing of water proofing compound as per manufactureer's instruction complete all as specified and directed : Note:-Water proofing compound shall be measured and paid sepratly complete all as specified and as directed by the Engr-in-Charge.

M & L for Preparation of new plastered surface of wall by applying two coat of Weather coat and over one coat of primer to match with existing finish or as specified & directed.

Supply only integral WPC complete all as sprcified.

Preparation of Old plastered surface of wall by applying two coat of Weather coat with existing finish or as specified & directed.

M & L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint .complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed

M & L for Type D2 1:4:8 (40 mm graded aggregat e) Cement concrete in in foundations,filling and mass concrete complete all as specified and as directed.

M & L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for Brickwork with subclass bricks `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 bricks complete all as specified and as directed.

M&L for Brickwork (except bricks) with subclass bricks `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 bricks complete all as specified and as directed.

M&L for Brickwork with subclass`B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 in half bricks wall complete all as specified and as directed.

M & L for PCC type B0 1:2:4 (12.5mm graded crushed stone aggregate) Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), Set in cement mortar 1:4 including dismantling of old jallies and remaing debries from site complete all as specified and as directed.

M& L for Broken glass coping on top of walls built in CM 1:6 bricks complete all as specified and as directed.

M & L For PCC type B1 1:2:4 (20mm graded graded crushed stone aggregate) Providing precast ce- ment concrete in win- dow or door cills, lintels,bressumers, steps,quoin blocks (for use with masonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed.

M & L for PCC type C2 1:3:6 (40 mm graded crushed stone aggregate) Cement concrete in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Demolition for plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) as sub base complete all as specified and as directed.

M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; all as specified and as directed.

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as floor,bed block for post/struts etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in natural ground complete all as specified and as directed.

Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone stone agreegate as in bed blocks to fencing post complete all as specified and as directed.

S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Dismantling fencing wire mesh, any type all as specified and as directed.

Supply only MS galvanised chain link fencing of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

S&F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

S&F mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed.

M&L for New or previously un treated steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint applying two coats of Synthetic enamel paint over a coat of red oxide primer.

M & L in repar Cast iron work grade FG 150, Decoretive Cast Iron Post , height mimmum 3mtr hollow post and thickness not less than 6mm . Post bottom dia 200mm o/o & Post Top dia 65mm o/o each post weight mimimum 65 Kg , unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete alll as specified and directed.

S & F for in repar Cast iron work grade FG 150, Decoretive Ornametal work complete alll as specified and directed.

S & F for in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete alll as specified and directed.

M & L for 30mm thick Rough dressed sand stone slab flooring bedded and jointed in 20mm thick cement mortar 1:6 and pointed in cement mortar 1:3 complete alll as specified and directed.

mohanlal gupta

Tridev Construction Company

SA construction co.

Manglam Engineers and Construction Co

AMBEY CONSTRUCTION

M/S AMAR ELEKTRO CENTRE

Arun Construction Co.

BHAGWAN DAS & Co

Shikha Enterprises

M/S AGARWAL CONSTRUCTION CO.

SHAKTI CONSTRUCTION CO