Improvement of Kampli-Kurugodu-Kudtuhini-Haraginadoni-Belagal-Ballari-Moka-Alur Road (SH-132) from Km 0.00 to 1.42 and Km 27.90 to 28.50 in Kampli Constituency under 5054 SH Renewals

Improvement of Kampli-Kurugodu-Kudtuhini-Haraginadoni-Belagal-Ballari-Moka-Alur Road (SH-132) from Km 0.00 to 1.42 and Km 27.90 to 28.50 in Kampli Constituency, Under 5054 SH Renewals for the year 2024-25.

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead (COMMON SR 2023-24 Vol-3...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...

Granular Sub-Base A Plant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in ...

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on Prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

Providing and laying Bituminous Macadam with 100 TPHcapacity hot mix plant batch type using crushed aggregatesof specified grading premixed with bituminous binderVG-30 @ 3.4% by weight of mix, transpo...

Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushedaggregates of specified grading premixed with bituminousbinder VG-30 @ 5% by weight of...

Road Marking with Hot Applied Thermoplastic Compoundwith Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorisi...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential...

Filling Pot-holes and Patch Repairs with Open-GradedPremix surfacing, 20mm (using VG-30 Grade itumen) Removal of all failed material, trimming of completed excavation to provide firm vertical faces, c...

Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Bituminous Macadam (...

Retro-Reflectorised Traffic Signs

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed ove...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer i...

Single Arm Street Light

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 2000 mm Stan...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capac...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (COMMON ...

Supplying heavy gauge PVC conduit pipe 40mmdia 2.5mm.mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided ...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, w...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (BESCOM-PART-III.Ele SR 2023-24 P.NO.22 Item No.51.02) ---- including cost of all materials, wi...

Good Quality Salt for grounding purposes packed in 50Kg gunny bag (BESCOM-PART-III.Ele SR 2023-24 P.NO.22 Item No.51.03) ---- including cost of all materials, with all lead and lifts, loading and un-l...

Rod Earthing Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected t...

0.91 mm Copper drop wire (KPTCL-PART-I-Material Portion,Ele SR 2023-24 P.NO.47 Item No-23.10) ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of lab...

Supplying and fixing 4 pole power contactor with NO/ NC contacts on existing wood/ pannel board using necessary bolts, nuts, washers and wiring etc, complete with AC-3 Rating as per IS-13947, 40 amp...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (COMMON Ele SR 2023-24 P.NO.21 Item No.5.48) ---- including cost of all materials, wit...

Supplying and fixing of porcelain fuse channel with cut out on existing wooden/ pannel using necessary nuts, bolts and washers etc complete. 63A (COMMON Ele SR 2023-24 P.NO.14 Item No.5.7.3) ---- inc...

Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. (COMMON Ele SR 2023-...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Double Arm Street Light

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000mm Standa...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capac...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (COMMON ...

Supplying heavy gauge PVC conduit pipe 40mmdia 2.5mm.mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided ...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, w...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each (BESCOM-PART-III.Ele SR 2023-24 P.NO.22 Item No.51.02) ---- including cost of all materials, wi...

Good Quality Salt for grounding purposes packed in 50Kg gunny bag (BESCOM-PART-III.Ele SR 2023-24 P.NO.22 Item No.51.03) ---- including cost of all materials, with all lead and lifts, loading and un-l...

Rod Earthing Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected t...

0.91 mm Copper drop wire (KPTCL-PART-I-Material Portion,Ele SR 2023-24 P.NO.47 Item No-23.10) ---- including cost of all materials, with all lead and lifts, loading and un-loading charges, cost of lab...

Supplying and fixing 4 pole power contactor with NO/ NC contacts on existing wood/ pannel board using necessary bolts, nuts, washers and wiring etc, complete with AC-3 Rating as per IS-13947, 40 amp...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (COMMON Ele SR 2023-24 P.NO.21 Item No.5.48) ---- including cost of all materials, wit...

Supplying and fixing of porcelain fuse channel with cut out on existing wooden/ pannel using necessary nuts, bolts and washers etc complete. 63A (COMMON Ele SR 2023-24 P.NO.14 Item No.5.7.3) ---- inc...

Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. (COMMON Ele SR 2023-...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...