RE-SURFACING OF ROAD AT RESTRICTED AREA UNDER GE SOUTH WEST NEW DELHI -03

M&L for repair to potholes any depth, not exc 1 Sqm each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder @ 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm, using bitumenous primer VG-10, complete all as specified and as directed.

M & L for bituminous premix asphaltic dense concrete 30 mm consolidated thickness , using paving bitumen VG-30 with 5.5% binder content by weight of total mix spread by means of self propelled mechanical spread/paver rolled and compacted to required camber and gradient by using tandem vibratory steel wheel static steel wheel and pneumatic tyre rollers min capacity 12 tonne, complete all as specified and as directed.

Removing all loose soil and gravel from existing pot holes of area of not execeeding 1 sqm and upto 30mm depth working by in built air jet pressure machine over pressur spray application of tack coat and over providing surface correction and pot hole filling using CSIR- CRRI technology based patch fill pot hole repair machine by authomatic production of on site cold mix patching material by using coldmix bitumen emulsion with 4.5% residual bitumen and compaction with vibrating plate compactor for even road profile, complete all as specified and as directed.

Preparation of surfaces by brushing with wire brushes for removing caked mud, dirty particles, old paint etc, sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all dirts etc, on black top or concrete surfaces and all cracks filling with crack filling compound, complete all as specified and as directed.

Providing and laying of 6mm to 8mm thick Microsurfacing Type II laid with a cold Mix/ Microsurfacing paver machine as per MORTH Specification (Section 514) & IRC : SP: 81-2008, complete all as specified and as directed.

Material and Labour for cleaning thoroughly and removing the dirt/ dust of bituminous surface road and applying marking paint 2.5mm thick centre lines or other lines, stop lines, dashes, arrows, letters and the like not exceeding 10cm wide on road pavements with hot applied thermo plastic road marking paint approved colour confirming to BS 3262-1989 with glass beads (Morth Grade) @ 300 gm/sqm over a painted surface while painting surfaces are hot with help of special road marking machine as per manufacturer's instructiuons, complete all as specified and as directed.

Dismantling of existing road furniture i.e cat eye, dealineator and road stud etc, complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc, complete all as specified and as directed.