Construction of Community Hall at keelapudhur Village of Nelkattumseval panchayat in Vasudevnallur Panchayat Union. package No.5 under CGF 2025-26 Saving and Interest

Amount

Construction of Community Hall at keelapudhur Village of Nelkattumseval panchayat in Vasudevnallur Panchayat Union. package No.5 under CGF 2025-26 (Saving and Interest)

Earth work excavation in hard stiff clay soil with initial lead and lift as per SS 20B for corewall etc., complete.

For Foundation

For Septic tank

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete For 10cum

Below Basement

Above Basement

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum.

Below Basement

Above Basement

Centering charges for all concrete works including all cost and conveyance of all materials and all labour charges etc., complete.

Below Basement

Above Basement

Supplying and filling of conveyed Earth by lorry in basement filling including stacking for premeasurement, conveyance loading, and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete

Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door 0.90 mx2.10

Fabrication and supply of Mild Steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Window 1.50 mx1.30m

Fabrication and supply of Mild Steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Window 1.20 mx1.30m

Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door 1.80mx2.10

Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door 0.75mx2.10

Supplying and fixing of UPVC Door of size 0.75 mx2.10m including cost and conveyance of all materials to site and all labour charges etc complete.

Door 0.75mx2.10

Fabrication and supply of Mild Steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Ventilator 0.60 mx0.45m

Fabrication and supply of Mild Steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Ventilator 0.90 mx0.45m

Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door1.20mx2.10

Supplying and fixing of RCC Jolly of size 0.60 mx0.45m including cost and conveyance of all materials to site and all labour charges etc complete.(Local rate)

jolly 0.60x0.45m

Supplying and fixing of RCC Jolly of size 0.30 mx0.30m including cost and conveyance of all materials to site and all labour charges etc complete. (Local rate)

jolly 0.30x0.30m

Labour charges for fixing of steel door including cost and conveyance of all materials to site and all labour charges etc complete.

Labour charges for fixing of steel window,Ventilators including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Plastering with cement mortar 1:5 mix to 12 mm thick including Cost and Conveyance of all materials to site and all labour charges etc complete for 10 sqm.

Dadooing of walls with Colour glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with best quality Vetrified (Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete.

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,Complete.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

European Water Closet with P or S Trap with DoubleFlapped Seat and Seat Cover with Brass Hinges and 12.5litre capacity Porcelain Low Level Flusing Tank with allinternal fittings

Provision for Water supply Arrangements

Supply and Delivery of 1000 Litres Capacity HDPE Tank (SOR 2024-2025 VOL-2 PG NO-87)

Supply and Delivery of 40mm PVC Pipe 6Ksc(SOR 2024-2025 VOL-1 PG NO-159)

Supply and Delivery of 32mm PVC Pipe 6Ksc(SOR 2024-2025 VOL-1 PG NO-147)

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders including Refilling with excavated earth as per SS20B for pipe laying work.

Refilling of excavated portions for pipe linelaying works using excavated earth and levelling the top of the surface properly with adjecent ground levels

Labour charges for Laying of GI, PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing etc., complete.

40mm PVC Pipes

Provision for Paver Block Arrangements

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Cement concrete 1:3:6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Providing and Laying Paver Block of 80mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete.

Provision for Compound wall

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,Upto 0.30m depth

Supplying and Filling Sand including all labour charges for filling including watering ramming, consolidation and other incidental charges etc., complete

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing , laying,curing etc complete.,

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supplying and fabrication of steel,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

R.Cement concrete 1:1.5:3 mix using 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing , laying,curing etc complete.,

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x41/4"x2 3/4" for foundation and basement and superstructure inculding cost and conveyance of all materials curing etc ,complete.

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Provision for Bore well

Drilling of 180 mm dia deep borewell in Overburden soil

Drilling of 150 mm dia deep borewell in hard rock area.

Supply and delivery of 180 mm dia PVC Pipe 6 KSC (SOR 2024-2025 VOL -2 PG.NO-5)

Supply and Delivery of single phase submersible pumpset duty in 20 LPM x 150 M Head for 150 mm dia deep bore well ( SOR 2024-2025 VOL -2 PG.NO-102)

Supply and Delivery of 2 HP Single phase suitable panel board. ( SOR 2024-2025 VOL -2 PG.NO-119)

Supply and Delivery of 2.50 Sq.mm 3 Core Flat Type copper cable ( SOR 2024-2025 VOL -2 PG.NO-124)

Supply and Delivery of 40mm HDPE pipe-10Kg/cm2 ( SOR 2024-2025 VOL -1 PG.NO-156)

Supply and fixing of kiosk size of 0.75 m x 0.45 m x 0.75 m made out of M.S.Angles and sheets ( SOR 2024-2025 VOL -2 PG.NO-91)

Labour charges for erection of 2.00 HP submersible pumpset in the borewell. ( SOR 2024-2025 VOL -2 PG.NO-204)

Supply and delivery of 63 mm PVC Pipe 4 KSC ( SOR 2024-2025 VOL - PG.NO-5)

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B

Refilling excavated earth including all cos

Laying And Jointing 63 mm PVC Pipe ( SOR 2024-2025 VOL -2 PG.NO-171)

Provision for Electrification Arrangements

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. sd-36

Supply and fixing of single box type 4feet 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.SD-88

Supply and fixing of fancy glass shade and 15 W LED Bulb SD 80

Supply and fixing of 1200 mm (48inch) sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.SD-110

Supply and fixing of TNEB Meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.-SD-125

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) SD 142

Supply and run of 2 of 1.5Sqmm (22/0.3) PVC insulated SC. Unsheathed copper conductor of 1100V Grade on 7/20 GI Bearer wire for service Connection Mains-SD-65

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete. P-87

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 11W CFL lamp with CFL-SD 83

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

MARIDURAI (BID ID -1485090)