Comprehensive maintenance to old Umrao and old Laungewala colony of AGE BR-II under GE (N) Bikaner at Bikaner Mil Stn

Amount

Demolition of reinforced cement concrete to any thickness as in slabs, beams incl cutting of reinforcement as reqd at site complete all as specified and as directed. (Note : Rates include removal of overlain mud fuska/lime concrete).

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position complete all as specified and as directed.

M&L for Sand stone slab 25-35mm thick set jointed and pointed self faced punched dressed laid as in chhajas, sunshade and man holes covers set in cement mortar 1:4 incl.making chases in wall complete all as specified and as directed.

M&L for brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:6 including demolition of old bricks complete all as specified and as directed.

M&L for half brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:4 including demolition of old bricks complete all as specified and as directed.

M&L for Rendering 10+5 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth any hight of building without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete and also including scaffolding complete all as specified and as directed. (Water proofing compound to be measured and paid for separately).

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes including dismantling floor,hearth tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 for receiving tiles on vertical surface including dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes including Dismantling floor,hearth tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (450mmx300mmx7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface including dismantling wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform and including screed bed of 20mm thick in cement mortar 1:4 laying floor /platform finishes including dismantling old granite including cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane including Hacking out old broken glass complete all as specified and as directed.

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane including Hacking out old broken glass complete all as specified and as directed.

M&L for demolition of sunken filling concrete, removal of loose concrete and cleaning the surface and after proper cleaning filling the cracks with polymer modified mortar using Dr fixit pidicrete URP and providing 50mmx50mm angle fillets on the vertical upstands, parapet wall junction corners, service units and properly dressed by preparing polymer modified mortar with DR Fixit pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement, add the water little little unit the required consistency is achieved and thereafter providing and applying two coats of acrylic polymer modified cementitious coating Dr Fixit pidifin 2K of M/s Pidilite Industrieshaving elongation at break 50% 5 bar resistance to positive water pressure, Adhesive strength ASTM D 7234-1 N/mm sq, water vapour transmission as per ASTM E96 of 030 perms and crack bridging ability as per EN 1062-7 upto 1 mm. Apply two coats of Dr Fixit pidifin 2K slurry “ coverage of 0.55-0.58 Sqm/kg of mix slurry. Provide and lay 45 gsm glass fibre mesh over the angle fillet when the first coat is still wet. Allow the first coat to dry for 6-8 hours, then apply the second coat at a direction perpendicular to first coat. Allow the coating to air cure for 5 days before conducting water ponding test for 24 hrs etc or other equivalent product as approved by GE in sunken area complete all as per the manfactures instruction, including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed.

M&L for rendering 10 mm thick in cement plaster (1:3) using coarse sand even and smooth with steel trowel on sunken surfaces using integral water proofing compound complete all as specified and as directed. ( WPC shall be measured and paid separately).

M&L for plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete such as sunken floors complete all as specified and as directed.

Supplying and laying of 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and as directed.

Supplying and laying of 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and as directed.

Cleaning of PVC water tank capacity 500 & 1000 ltrs and removing all scale and dirt etc, from tanks and from mouths of circulating pipes using , etc. complete all as specified and as directed.

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe complete all as specified and as directed.

M&L for 10 mm thick screed bed in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns ( WPC to be measured separately as supply only) complete all as specified and as directed.

M&L for roof treatment in as specified below and as directed:- (a) Cleaning, washing of surface and removing any debris, Surface shall be free from any loose paint, dust or grease. (b) Applying one coat of Elastomeric PU based liquid membrane diluted with portable water in the ratio of 1:1 and apply @ 0.40kg/sqm. (c) laying polyster reinforced fiber Net/50 Gsm Geotextile mese, upto 300 mm on walls. (d) Applying two coats of undiluted PU based liquid membrane, having elongation more than 400 %, tensile strength more than 2 N/mm2 and alkali & fungal resistant maintaining thickness of 1.5mm, with brush/roller upto 300mm on walls. (e) That complete treatment to be carried out by authrised applicator of waterproofing manufacturer. Make : Asian/fosroc/Dr fixit etc. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer-in-Charge.

S&F in repair chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and as directed.

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm/600mm complete all as specified and as directed.

S&F in repair fancy type chromium plated stop valve/angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm complete all as specified and as directed.

Demolition of lime concrete of any description over roof slab complete and thrown away at specified location complete all as specified and as directed.

M&L for providing, cement concrete in roof Type B0 1:2:4 using 12.5 mm graded aggregates as in PCC Bed complete all as specified and as directed.

S&F in repair 32 mm/40mm size cp waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm/25mm complete all as specified and as directed.

S&F PVC flexible Waste pipe 40/32 mm for SINK &WHB fixed in repairs complete all as specified and as directed.

S&F in repair health faucet with 1 mtr long tube and hook and knab complete all as specified and as directed.

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bend Provided with access door complete all as specified and as directed.

S&F 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) bend Provided with access door complete all as specified and as directed.

S&F of 110 mm PVC (SWR) junction single, (Single T) equal or unequal provided to access door complete all as specified and as directed.

S&F of 75 mm PVC (SWR) junction single, (Single T) equal or unequal provided to access door complete all as specified and as directed.

S&F 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for preparation of new/old wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of newly/old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for two coats of oil bound distemper on walls including preparation on old surfaces complete all as specified and as directed.

M&L for two coats of oil bound distemper on walls including preparation on new surfaces and over coat of primer complete all as specified and as directed.

M&L for applying two coats of white washing on ceiling including preparation of new/old plastered surfaces complete all as specified and as directed.

M&L for prep of surfaces of old or new surfaces incl removal of old treatment and applying a thin layer of 3 mm thick of Birla white putty to give a uniform finish complete all as specified and as directed.

M&L for applying two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, alkaili & fungul resistance dirt resistance exterior paint of required shade(company depot tinted) with silicon additives @ 1.43liter/10 sqm over and including priming coat of exterior primer applied @.90 liters/10 sqm over surface complete all as specified and as directed.

Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame )complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item).

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening including repairs and easing/adjustment to existing shutter complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item).

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and romoving to store complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

M&L for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

M&L for corner glass assembly consisting of 5.5 mm thick sheet glass with chromium plated bracket guard complete all as specified and as directed.

S & F in repairs stainless steel tubular curtain/drapery rod 25 mm dia ( in length as directed) with & including pair of projecting type fancy stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on wall/beam complete all as specified and as directed.

S&F in repair 300mm mild rat tail rod pattern springs including roller and, roller plate and welded to chowkhats and taking down old unservicabale spring, complete all as specified and as directed.

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F SS tower bolts ,150 mm length complete all as specified and as directed.

S&F SS sliding door bolt, plate type 250 mm complete all as specified and as directed.

S&F SS handle, size 150 mm, complete all as specified and as directed.

S&F in repair Hasp and staple 100mm safety type,Aluminium anodised,withmild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 150mm complete all as specified and as directed.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for doors including necessary fixing lugs, hinges, lock strike plate, etc and including PCC as filling back of chowkhat/frame complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

S&F Flush Shutters 35 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock if required and hinges including both face is covered with decorative face veneer with lipping /frame to match complete all as specified and as directed.

S & F 2nd class hard wood glazed and skeleton shutters 35mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) supplied and fixed to chowkats complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item).

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification complete all as specified and as directed.

S&F 150 mm Aluminium anodised ,tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm Aluminium anodised , fabricated type, handles complete all as specified and as directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for 18 mm thick WPC (Wood Polymer Composite) solid door suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including all hardware fittings (SS Auto hinges,SS designer handle, locking arrangement etc) including dismantling of boarding complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , incl P or S trap comp fixed in repairs complete all as specified and as directed.

S & F Piano Hinges mild steel ,bright finish width of flaps open in 40mm complete all as specified and as directed.

S&F stainless steel catcher of superior quality complete all as specified and as directed.

S&F telescopic channel steel ball 20" drawer side channel of standered size and incl of roller for moving drawer, mild steel bright finish or electrogalvanised complete all as specified and as directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and as directed.

M & L for Modular point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as spcified and as directed as per following:- Note :- (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to be included for moduar metal flush boxes of requiste module and modular cover plates with frame of requisite module of colour as approved by GE.

One Light/fan/ex-fan point controlled by one switch.

One socket point on the same board with other switch complete.

One 3 pin 5 amps socket on independent board.

All as per item No-82 above but with 2.5 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

All as per item No 82 above but but one light point controlled by two 02 way switch board complete and all as directed by Engr-in-charge.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed. M & L for submain wiring complete all as specified and as directed.

M&L for submain (single phase) wiring complete with and including 6.0 sqmm two single core, (FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through Existing PVC conduit including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed. Note :- (i) Two runs of 6.0 sqmm PVC insulated wire and one run of 6 sqmm earth wire shall be measured as one unit length.

M&L for submain (single phase) wiring complete with and including 6.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC concealed conduit of suitable size including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed. Note :- (i) Two runs of 6.0 sqmm PVC insulated wire, one run of 6 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

Taking down old U/S existing DB any type including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

S&F MCCB TPN DB, 4 way Vertical type, 440V, 3 phase with rated busbar 200 Amps, double door type suitable for MCCB as a incomer and MCBs as out going double door type ,grouted in walls with Fixing arrangemant complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 12 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F MCB SPN/SP as per following specification in replacement complete all as specified and as directed.

S&F MCB SPN, 6-32 Amps , 240/415 volts, breaking capacity 16KA complete all as specified and as directed.

S&F MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as directed.

S&F MCCB as per following specifications in replacement complete all as specified and as directed.

S&F MCCB 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed.

S&F MCCB 63 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 100 amps, 4 pole, 415 volts,overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 125amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 63 amps, 3 pole, 415 volts,overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 100 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts complete all as specified and as directed.

S&F switch Modular type, 16 Amp, 1 module single pole two way, 230 Volts complete all as specified and as directed.

S&F Bell push Modular type, 6 Amp, 1 module single pole , 230 Volts complete all as specified and as directed.

S&F socket outlet as per following specifications complete all as specified and as directed.

S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and as directed.

S&F socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and as directed.

S&F fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and as directed.

S&F in repair modular white cover plate as per following specification complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 1 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 2 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 3 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 6 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repair modular metel flush box with following specifications given below complete all as specified and as directed.

S&F in repair modular metel flush box but 1,2, module to suit as existing make complete all as specified and as directed.

S&F in repair modular metel flush box but 4 module to suit as existing make complete all as specified and as directed.

S&F in repair modular metel flush box but 6,8 module to suit as existing make complete all as specified and as directed. NOTE for item No 110 to 121:- These items shall not be operated with new point wiring under items 82 to 84 hereinbefore.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED bulb 9 watt complete all as specified and as directed.

S&F sheet metal enclouser TPN 4 way , Double door DB, IP-54 bus bar neutral link earth bar and din rail make MDS with provision of 01 X 63 Amps four pole MCB complete all as specified and as directed.

S&F MCB TPN 'C' curve 40 TO 100 Amps 415 Volts complete all as specified and as directed.

Taking down LED tube light fitting, 20 watt/10 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete all as specified and as directed including writing MES No at the site.

Taking down Exhaust fan,sealing cable end,dismantling blades and removing fan and blades & refixing Exhaust fan of any make, any sweep , keeping side in store in safe custody for painting of Exhaust fan complete,in situ with synthetic enamel paint byspraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete all as specified and as directed including writing MES No at the site.

Removing and refixing water heater storage type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement complete all as specified and as directed.

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, earth electrode, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters complete all as specified and as directed.

SUBHAM ENTERPRISES (BID ID -3406437)

HARI SINGH AND COMPANY (BID ID -3408054)

HARPREET SINGH CONTRACTOR (BID ID -3407807)

M/S BUDHRAM BISHNOI (BID ID -3407661)