Construction of Compound wall at Corporation Middle school Thadagam road, Edayarpalyam in Ward No 35, West Zone

Amount

Earthwork excavation in all types of soils including all initial lead and lift etc complete.

Cement concrete 1:4:8 (one cement, foure sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specification.

Course Rubble stone for masonry works complete complying with standard specification for the following including all cr works etc., completed.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. l.No.122

Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications.

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Brick work in CM 1:5 (One cement & five sand) using II class ground moulded bricks of size 9"X43/8"X3 3/4" including finishing, curing etc., complete complying with standard specification for the floowing including cruing etc., complete

Supply and fixing of Ornamental Design Gate made M.S sections and angles for neccessary vertical and horizontal supports with 10 mm square rods for bracings 20 mm flats for designs etc including all neccessary supports and locking arrangements etc complete

Plastering for concrete surfaces using cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all , internal/external surfaces for drains etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights

Painting the Wall Two Coats with approved colour Emulsion paint over one Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

Painting with Two Coats of approved colour Enemal paint over One Coat of primer over the New iron doors and gates surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

JAYALAKSHMI BUKDERS