REPAIR AND MAINT OF STREET LIGHT, REFRIGERATION, AIR CONDITIONING EQUIPMENTS AND CONNECTED WORKS AT 156 INF BN TA UNDER AGE(I) CIF(R)

Amount

Supply, fixing and erection of steel tubular swaged pole 09 m long, type 410 SP-32, weight not less than 154 kgs, pole should be in one piece only and smooth finishing, ISI marked conforming to IS:2713-1980, complete with all accessories, such as cast iron base plate, finial taper plug, bolts, nuts, screws, washers and drilling of holes for continious GI earth wire as specified including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer and embedded portion shall be painted with two coats of black paint after preparation of surface including taking down old unserviceable pole complete all as specified and directed. Note:-Excavation and earth work shall be measured and paid separately.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried dirctly in ground with earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron strip of 25 x 4 mm earthing lead by means of nuts bolts check nuts GI washers earth wire protected by GI pipe 32 mm bore, light grade, including concrete pit in PCC (1:3:6) type C1 of size 45x45x45 cm, precast RCC (1:2:4) type B1 as cover of size 40x40x10 cm with one handle for lifting made out of 8 mm dia MS bar, GI funnel wire mesh, 20 mm bore GI pipe, medium grade, for watering, charcoal or coke and salt packed all around in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion including demolition to existing one complete all as specifed and directed. (Note :- (i) PCC pit, RCC pit cover, GI earth protection & watering pipe, funnel, earth strip upto 7.5 Mtr etc shall deemed to be included in the unit rate.

Excavation in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for Pole, cable, shafts, cesspits, manholes, pier holes, etc and getting out of any type of soil complete all as specified and directed.

All as per Item No.3 above but depth exceeding beyond 1.5mtr and not exc 3 metre all as specified and as directed

Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge.

M&L for replacement of under ground XLPE insulated, screened, PVC bedded galvanized steel strip or wire armored, electric power cable (heavy duty) with aluminium conductor, 1100 volts (earthed) grade following cross sectional area laid in trenches/ pipes/ ducts/ wall/ boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing including disconnecting and taking out of existing LT cable of any type and size complete all as specified and directed. Note:- Excavation and earth, sand coushioning and protection for cable work shall be measured and paid separately.

Cross sectional area 16 Sqmm 4 Core complete.

Cross sectional area 25 Sqmm 3.5 Core complete.

Cross sectional area 10 Sqmm 2 Core complete.

Supply and fixing in replacement of MCCB 200 Amps, 4 pole, 415 volt, 50 Hz with breaking capacity 36 KA with adjustable thermal and fixed magnetic type, complete all as specified and directed.

All as per srl item No. 10 here-in-before but rating 160 amp & breaking capacity 36 KA.

All as per srl item No. 10 here-in-before but rating 100 amp & breaking capacity 16 KA.

M&L for replacement of GI bracket bend to shape, made out of 40 mm dia GI pipe medium grade suitable for fixing of street light fittings upto 1.2 mtr long fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.

M&L for replacement of junction box hot press moulded SMC of inside dimension size 300 x 200 x 105 mm with locking arrangements consisting of necessary suitable arrangements for incoming & out going cables with cable glands & having aluminium bus bar 4 strips of 20x3mm for TPN on necessary epoxy base insulator and fixing of 6 Amp MCB SP, including necessary 25x3mm flat iron clamps with nuts, bolts & washers all as specified and directed.

Supply and fix in replacement of 1.5 Sqmm three core multi stranded copper conductor (FRLSH) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694 complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping of pole around pole all as specified and as directed by Engineer-in-Charge.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation of pole all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Off load change over switch 63 amps 415 volts 4 pole 50 Hz in sheet metal enclosure with out side handel operated complete all as directed by Engr-in-Charge.

S&F in replacement of Off load change over switch 100 amps 415 volts 4 pole 50 Hz in sheet metal enclosure with out side handel operated complete all as directed by Engr-in-Charge.

S&F in replacement of aluminium cable thimbles of size 35 Sqmm UG Cable including complete connection and crimping, complete all as specified.

All as per item No.20 here-in-before but size 25 Sqmm.

All as per item No.20 here-in-before but size 16 Sqmm.

All as per item No.20 here-in-before but size 10 Sqmm.

S&F LED Post Top Lantern 25 watt IP-65 luminaire with diffuser and painted spun aluminium deflector including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate suitable for pole dia 50mm dia and taking down old unserviceable and including taking down old unserviceable . Make :(Cat CORALPT25WLED757PSYMTOPC) of Havells or equivalent cat part of make as specified in list of make here-in-after.

S&F in replacement of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 60 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable. Make : (Cat ENDURAOMNIPLUSSL60WLED757SASYTOPC of Havells or equivalent cat part of make as specified in list of make here-in-after.

S&F in replacement of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 90 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable. Make : (Cat ENDURAOMNIPLUSSL90WLED757SASYTOPC of Havells or equivalent cat part of make as specified in list of make here-in-after.

S&F in replacement of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 120 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unserviceable. Make : (Cat ENDURAOMNIPLUSSL120WLED757SASYTOPC of Havells or equivalent cat part of make as specified in list of make here-in-after.

S&F in replacement of LED street light drivers of size 90 watt for existing model of LED fitting, complete all as specified & directed.

S&F in replacement of LED street light drivers of size 120/150 watt for existing model of LED fitting, complete all as specified & directed.

S&F in replacement of LED street light surge protector 5 KA 60/75 watt for existing model of LED fitting, complete all as specified & directed.

S&F in replacement of LED street light surge protector 10 KA 90/150 watt for existing model of LED fitting, complete all as specified & directed.

S&F in replacement of Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient IP- 66 LEDs as light source, suitable for highlighting architectural features or retail spaces of capacity 100 Watt completed with connection including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable. Make : (Cat JETAALBAFLOODLIGHT100W of Havells or equivalent cat part of make as specified in list of make here-in-after.

M&L for GI pipe 40 mm dia "light grade" ISI marked, laid in trenches/ on floors/on, pole/road for cable protection including necessary joints / fittings including taking up / down and removing old unserviceable GI pipe complete all as specified and directed .

M&L for GI pipe 25 mm dia "light grade" ISI marked, laid in trenches/ on floors/on, pole/road for cable protection including necessary joints / fittings including taking up / down and removing old unserviceable GI pipe complete all as specified and directed .

M & L for pole painting 9.0 mtr long with two coat of aluminium paint after preparation of old painting surface by scrappining including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from couping to upto height 1.5 mtr of pole alternative way including necessary `MES & Pole number to be wriiten in the circular yello batch on the pole all as specified and directed.

Taking down carefully ceiling fans at any height of any sweep/ make /model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder,terminal adoptor, screws, nuts, spring washers for blade/body etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts, remetalling of worn out shaft of fan cutting brazing machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the engineer in charge to ensure smooth and noise free operation(bearing shall be measured and paid seperately) including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. (Note:- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only

(ii) Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate. (iv) All repair works will be carried out at ON site/ workshop E/M yard as directed by EIC. (v)Repair works of fans should completed and refixed the same within 12 hours after receipt of complaint slip.If the complaint not attended /not completed on same day recovery will be done from RAR bill as follows: a) For first day Rs 200 b) For second day Rs 300 c) For next every day Rs 500

All as per serial item No.36 here-in-before but for exhaust fan of size 300mm/450mm sweep

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the ceiling fan (1200/1400mm sweep) armature/motor with new super enamelled copper wire of existing gauge including supply and fixing necessary E class insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

M&L for rewinding of heavy duty exhaust fan motor of 300 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns and assembling of fan motor and rotor and testing including removing burnt out copper winding wire from fan motor complete all as specified and directed.

All as per item No. 39 above but 450 mm.

Supply only gun metal bush suitable for ceiling fan/Exhaust fan/Air circulator fan /wall mounted fan of any sweep/type of any size.

Supply only Ball bearing No.6201/6202/6203/6204 for ceiling fan (Make - TATA/SKF /NBC/NRB).

Supply only fan condensor 2.5 mfd,230 volt,AC 50Hz confirming to IS 1709 for ceiling fan,exhaust fan,wall mounted fan and pedestal fan

Supply only fan condensor 3.15 mfd (Make - USHA/UNIVERSAL/Havells)

Supply & fixing Electronic fan regulator stepped type with five step ,two module, 100Watt 240 volts complete all as directed.

Supply only flexible multi stranded copper wire three core of size 0.75 sqmm all as specified and as directed.

Supply only PVC connector 4 way 6Amp with connection screws nuts etc complete all as directed.

Supply only PVC canopy set of two pieces for ceiling fans of any size complete all as directed.

Supply only rubber reel with nuts bolts clamp and washers of suitable size for ceiling fan complete all as specified and as directed.

Supply only down rod made of MS pipe medium grade 15mm bore of 900mm long including drilling hole both ends & making slot in one end for fixing of ceiling fan of any sweep/type including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and Fix in replacement voltage stabilizer 4 KVA suitable for window/splite type AC/ Deep freezer/ Refrigerator working on AC 240V 50Hz single phase all as specofied and directed.

Comprehensive repair/maintenance of storage type electric water heater (Geyser ) vertical or horizontal type of capacity 35 Ltrs comprising of the following :- (a) Inspection, taking down , opening or dismantling, de-scaling,brushing and thoroughly cleaning the storage tank up to the satisfaction of the Engineer-in-charge. (b) checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc. in situ to ensure free movement of the parts including supply and replacing the washers/gasket nut etc. (c) Checking and rectify earth continuity of the Electrical circuits of the Geysers and power point. (d)Checking,and re-fixing thermostat and re-adjust. (e) De-scaling the immersion type heating element and siphon assembly with diluted Hydro chloric acid or clear pedette solution.

(f)Checking of indicator lamp for it serviceability . (g)Re-assembling the Geyser, re-install and testing complete. (h) The rate for above ietm are deemed to include for transportation of geyser to the work shop as approved by Engr-in-Charge for necessary repairs and testing of Geyser at workshop. (j) All repair works will be carried out at ON site/ workshop E/M yard as directed by EIC. (k)Repair works of geysers should completed and refixed the same within 12 hours after receipt of complaint slip.If the complaint not attended /not completed on same day recovery will be done from RAR bill as follows: a) For first day Rs 200 b) For second day Rs 300 c) For next every day Rs 500 Note : Parts / components of geysers found unserviceable shall be replaced by the contractor. New parts/components required shall be measured and paid separately under item here-in-after as supply only and labour charges required for replacement are deemed to be included in the quoted rate

All as per item No.52 here-in-above but Geysers of capacity 25 ltrs .

Supply only thermostat(Adjustable type) of Rod/stem Type EST-11EM,20A resistive , 250 Volt, opening on temperature rise of approved make and having ISI mark all as specified.

Supply only steel inner tank suitable for storage type water heater (geyser) 25 litre capacity.

Supply only steel inner tank suitable for storage type water heater (geyser) 35 litre capacity.

Supply only steel siphon geyser assembly 6/9 hole suitable for 35 ltr capacity geysers any make as required at site of approved make complete with inlet and outlet and provision for thermostat pipe with drain pipes with drain plug, screws, studs, clamps for fixing heating elements etc. including gasket all as specified and as directed

All as per item No.57 here-in-above but siphon assembly suitable for 25 ltrs capaity Geysers.

Supply only heating elements of capacity 1.5 KW AC 240 volts suitable for storage type electric water heater as per site requirement (press type /screw type/triangular/circular base or ceramic cartige type),ISI marked all as specified and as directed.

All as per item No.59 here-in-above but of capacity 2 KW AC 240 volts

Supply only glass wool for geyser 25/35 litres capacity all as directed.

Supply only gasket of thickness 5mm for geyser assembly of 09 holes/09 holes complete all as specified and as directed.

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type.

Supply & fixing in replacement of PVC connection pipe 15 mm dia, 450mm long with end nuts and washer, suitable for cold/hot water outlet of geyser complete all as specified and directed.

Supply & fixing in replacement of PVC connection pipe 15 mm dia, 600mm long with end nuts and washer, suitable for cold/hot water outlet of geyser complete all as specified and directed.

Supply only safety valve suitable for 25 Ltr/35 Ltr geyser all as specified and as directed.

Supply only non return valve 15mm bore as in replacement of old one and connection and testing complete all as specified and as directed.

Supply only plug top 3 pin 16 Amps,240 volts.

Supply only flexible multi stranded copper wire three core of size 2.5 sqmm all as specified and as directed.

Supply only fastner mild steel 100/150/200mm long complete all as directed.

Supply and fix in repair Single pole and neutral enclosure(1P+N+E ) with a two pin and earth plug and socket complete with one double pole 20A MCB all as directed.

Supply and fix in repairs Switch socket combination universal type, 3 pin 16 Amp, flush type, 240 volts, ISI marked complete all as specified and directed by the Engrs-in-Charge.

Servicing of Refrigerator/Deep freezer/water cooler of any capacity complete with chemical solution to condenser & cooling coil, cleaning of entire elements of AC, oiling/greasing to motor, including tracing out the leaking of condenser/evaporator filling the holes by using gas welding, complete with refilling of refrigerant R12/R11/R134a(whichever is applicable) etc complete all as specified and as directed.

Supply only PVC Gasket non- magnet for chiller top any make of water cooler including fixing arrangement complete all as specified and directed.

Supply only starting capacitor 40/60 MFD Make : EPCOS/Sycaparisto/ASIAN

Supply only over load protector relay (Suitable for any make / model of compressor all as approved by Engineer-in-Charge

Supply only AC electric condensor motor of 1/35 HP , SP 230 Volts, complete with blade all as specified and directed. Make : KSB/Beacon/ Kirlosker )

Supply and charging the gas refrigerant R-12/R-134a (freon) suitable for reezer/Refrigerator including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 Sqmm aluminium Stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 10 Sqmm aluminium Stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Supply and fix in replacement voltage stabilizer 5 KVA suitable for window/split type AC/ Deep freezer/ Refrigerator working on AC 240 V,50Hz single phase all as specified and as directed.

Supply and fix in replacement voltage stabilizer 2 KVA suitable for window/split type AC/ Deep freezer/ Refrigerator working on AC 240 V,50Hz single phase all as specified and as directed.

Supply only new compressor unit for 310 Ltr capacity refrigerator Make: Whirlpool/VOLTAS/LG/GODREJ

Supply only blower fan motor suitable for refrigerator of cap up to 310 Ltr cap.

Supply only thermostat switch with defrosting arrangement suitable for Refrigerator of capacity up to 310 Ltrs

Supply only starting relay suitable for refrigerator of cap up to 310 Ltr cap.

Supply only magnetised door lock rubber strip gasket set complete for refrigerator of cap up to 310 Ltrs

Supply only freezer for refrigerator for 280/310 Ltrs capacity

Supply only electric bulb SP 230 volts screw/Pin type with base all as directed

Supply only over load protection for refrigerator of capacity up to 310 ltr.

Supply only Freezer door with hinges for refrigerator of cap 280 ltr/310 Ltrs (As per sample )

Supply and fix new compressor sealed unit for deep freezer capacity up to 320 Ltrs obtained from the factory outlet /authorised dealer alongwith test certificate and with one year guarantee card and testing on full load complete all as specified and directed by Engineer in charge. Make: Blue star / Emerson/Tecumesh/LG/Kirloskar/Whirlpool.Note : Gas charging and gas shall be paid and measured separately under appropriate item of this sch

Supply and fix blower motor 1/9 HP 230 volt single phase Make: Unitech/Universal.

Supply and fix Thermostat for Deep Freezer upto 320 Ltrs capacity.

Supply only starting relay suitable for deep freezer upto capacity 500Litres.

Supply only overload protector device for deep freezer upto 500 litres capacity.

Supply only Running capacitor for deep freezer upto 400 Litres capacity.

Supply only Starting capacitor for deep freezer upto 400 Litres capacity.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 34,841.00 during AOC Note:- Tenderers shall not quote for this Schedule

NATIONAL TRADING COMPANY

M/S PARSHOTAM KUMAR GUPTA