Annual Repair and Maintenance Electrical works, including operation and maintenance of Electromechanical Equipment Lifts, DG Sets, Firefighting equipment, 11KV 415V Switch yard and Substation, HT LT Panels, STP ETP, RO Plant etc. at ESIH Coimbatore

Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

Supply of 20 mm iron staples/ saddles/ screws

Supply of 25 mm iron staples/ saddles/ screws

Supply of 20 mm dia. ISI marked, PVC conduit

Supply of 25 mm dia. ISI marked, PVC conduit

Supply of 20 mm PVC bends

Supply of 25 mm PVC bends

Supply of 20 mm PVC couplers

Supply of 25 mm PVC couplers

Supply of 20 mm PVC junction box, two way

Supply of 75 mm X 75 mm X 50 mm PVC box

Supply of Modular GI box for 2 module

Supply of Modular GI box for 3 module

Supply of Modular GI box for 4module

Supply of Modular GI box for 6 module

Supply of Ceiling rose, 3 pin, 5 amps ISI marked

Supply of S.P. 5/6 amps, one way modular switch, ISI marked

Supply of S.P. 15/16 amps, one way modular switch, ISI marked

Supply of 3 pin 5/6 amps modular socket outlet, ISI marked

Supply of 6 pin 15/16 amps modular socket outlet, ISI marked

Supply of Modular bell push, ISI marked

Supply of Stepped type Modular Fan regulator (2 module)

Supply of Modular blanking plate

Supply of Modular base & cover plate for 1 module

Supply of Modular base & cover plate for 2 module

Supply of Modular base & cover plate for 3 module

Supply of Modular base & cover plate for 4 module

Supply of Modular base & cover plate for 6module

Supply of Call bell/ buzzer, single phase

Supply of PVC Batten/Angle Holder

Supply of 32 amps. TPN, switch disconnecter fuse unit (Panel mounted type) with ISI marked HRC fuses

Supply of 63 amps. TPN, switch disconnecter fuse unit (Panel mounted type) with ISI marked HRC fuses

Supply of 100 A, TPN, switch disconnecter fuse unit (Panel mounted type) with ISI marked HRC fuses

Supply of 6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity

Supply of 6 amps. to 32 amps. ratings , DP MCB, "C" curve, 10 KA breaking capacity

Supply of 6 amps. to 32 amps. ratings , TPN MCB, “C” curve,10 KA breaking capacity

Supply of Single pole, Blanking plate

Supply of 40 amps., 4 pole isolator

Supply of 63 amps., 4 pole isolator

Supply of 25 amps. rating, 2 pole RCCB, 30mA

Supply of 40 amps. rating, 2 pole RCCB, 30mA

Supply of 63 amps. rating, 2 pole RCCB, 30mA

Supply of 20 amps. SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure

Supply of 4 way (4+12), TPN, MCB DB, double door, horizontal type

Supply of 6 way (4+18), TPN, MCB DB, double door, horizontal type

Supply of Brass compression gland for (28 mm) 3½ X 25 sq. mm 1.1 KV grade cable

Supply of Brass compression gland for (32 mm) 3½ X 35 sq. mm 1.1 KV grade cable

Supply of Brass compression gland for (35 mm) 3½ X 50 sq. mm 1.1 KV grade cable

Supply of Brass compression gland for (38 mm) 3½ X 70 sq. mm 1.1 KV grade cable

Supply of Aluminium lugs for 16 sq. mm cable

Supply of Aluminium lugs for 25 sq. mm cable

Supply of Aluminium lugs for 35 sq. mm cable

Supply of Aluminium lugs for 50 sq. mm cable

Supply of Aluminium lugs for 70 sq. mm cable

Supply of Aluminium lugs for 95 sq. mm cable

Supply of Aluminium lugs for 120 sq. mm cable

Supply of Aluminium lugs for 150 sq. mm cable

Supply of Aluminium lugs for 185 sq. mm cable

Supply of Aluminium lugs for 225 sq. mm cable

Supply of Aluminium lugs for 240 sq. mm cable

Supply of Aluminium lugs for 300 sq. mm cable

Supply of Rubber/ PVC bushes

Supply of GI saddles 19mm x 0.55mm for conduit

Supply of GI saddles 25mm x 0.90mm for conduit above 25mm

Supply of 250 mm X 200 mm H.T. danger notice plate

Supply of 200 mm X 150 mm M.V. danger notice plate

Supply of Coke

Supply of Salt crystal

Supply of Industrial type pressure gauges with gun metal / brass valves

Supply of Industrial type thermometres.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 100A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.250 A,36KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board includingdrilling holes in cubicle panel, making connections, etc. as required. 400 A, 50KA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 630 A, 50KA, FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

MCB 100A Four Pole MCB

SHEET STEEL ENCLOSURE FOR MCB’s - HIGHER END 2 Pole

SHEET STEEL ENCLOSURE FOR MCB’s - HIGHER END 4 pole

Supply and fixing of Rewirable Fuse (Kit-Kat) with Fuse base & Fuse carrier are made of high grade porcelain These are available from 32A and Rated voltage: 415V, 50Hz Standard: IS 2086:1993

Supply and fixing of Rewirable Fuse (Kit-Kat) with Fuse base & Fuse carrier are made of high grade porcelain These are available from 63 A and Rated voltage: 415V, 50Hz Standard: IS 2086:1993

Supply and fixing of Supply of HRC FUSE LINKS 6 to 35 Amp (DIN/BOLTED TYPE ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2

Supply and fixing of Supply of HRC FUSE LINKS 45 to 63 Amps (DIN/BOLTED TYPE ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2

Supply of 155 X 210 X 92 Sizes thermo-plastic cable junction boxes with IP66/67 weatherproof, for outdoor installation with knockouts for cable entry including terminals etc., complete (sizes in mm). Make : Hensel/Sadhrish

20W 4 Feet LED Fitting with LED

Supply and fixing 7W / 9W LED Bulb

Supply and fixing 15W LED Bulb

Supply and fixing 48W LED Street Light Fitting with LED

80W LED Focus Light Fitting with LED

150W LED Street Light Fitting with LED

Supply and fixing POLYSTER FILLED COPPER CHOKE 250V / 50HZ GRADE SUITABLE FOR40 Watts Fluorescent Tube

Supply and fixing 36 / 40W Electronic Ballast for Flourescent Tube

Supply and fixing Water Tight Bulk Head Fitting suitable for 100 / 60 Watts Lamp with Guard Heavy Type

Supply and Fixing of 2 Pin/4 Pin, Round/squared 18W LED bulb/light suitable for existing panel lights.Make: Havells/Philips/Wipro/Crompton

Supply and Fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED with 2 Years warranty. Make: Havells/Philips/Wipro/Crompton

18W LED 3000K Round Type Recessed Fitting with LED

Supply & fixing of LED Driver as per IS 15885 (Part 2 / Sec13)..2012 including transportation with input line voltage 120V-270V AC, 50Hz with surge protection more than 2.5 KV, IP20, suitable for 12/15/18/20 W LED indoor luminaire, with 2 Years Warranty. Makes: As per list of recommended brands.

Supply & fixing of LED Driver as per IS 15885 (Part 2 / Sec13)..2012 including transportation with input line voltage 120V-270V AC, 50Hz with surge protection more than 2.5 KV, IP20, suitable for 36 W LED indoor luminaire, with 2 Years Warranty. Makes: As per list of recommended brands.

Supply and fixing Automatic Electrical Water Heater with copper container,with Glass Wool / Puf Insulation with MS powder coated shell suitable for 25 Litres capacity 230V / 1000W (Higher End)

Supply and fixing Ceiling Rose

Supply and fixing Call Bell / Buzzer 6mm suitable for AC / DC

Supply and fixing Push Bell

Supply and fixing AC Ceiling Fan complete 1200 mm (48”) Sweep with 300mm Down Rod (without Regulator)

Supply and fixing Stepped Electronic 300W / 450W Square Type FanRegulator

Supply and fixing AC Exhaust Fan 300mm (12”) Sweep (Heavy Duty)

Supply and fixing MS / Fibre Louvers Shutters arrangements for 300mm AC Exhaust Fan

Supply and fixing MS / Fibre Louvers Shutters arrangements for 450mm AC Exhaust Fan

Supply and fixing 450 mm Sweep WALL MOUNTING FAN

Supply and fixing Surface Box [Supply and fixing SURFACE MOUNTING BOXES (PLASTIC) - HIGHER END] - 4 Module

Supply and fixing Surface Box [Supply and fixing SURFACE MOUNTING BOXES (PLASTIC) - HIGHER END] - 8 Module

Supply and fixing Surface Box [Supply and fixing SURFACE MOUNTING BOXES (PLASTIC) - HIGHER END] 8 (2 row x 4) Module

Supply and fixing 5 Amps 3 Pin Top

Supply of PVC /cotton tape Role (8 Mtrs)

Supply of 12 / 15 MS plain rod fan hook

Supply of 19 / 20 mm Steel tube fan down rod

Supply of Concealed box PVC / MS with hook for fan

Danger Notice Plates of size 250x200mm, 1982 -, shall comply with IS:2551-LEGEND PLATES

Supply of GI Louver shutter for exhaust fan of 9 to 12"

Supply of GI Louver shutter for exhaust fan of 15 to 18"

Supply and fixing 400mm High speed pedestal fan Oscilating

Supply and fixing 6A, flush type Neon Indicator

Supply of HT Rubber chequared mat suitable for upto 33 KV of size 1 meter x 2 meter by 20 mm thick all as specified and as directed by the Engr-in-Charge.

Supplying and drawing 3 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 6 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of 20 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 32 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group-C

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 35 sq.mm and upto 95 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supply and transportation of 10Sq mm X 4 coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Supply and transportation of 16 Sq mm X 4 core coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Supply and transportation of 25 Sq mm X 3.5 core core coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Supply and transportation of 35 Sq mm X 3.5 core core coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Supply and transportation of 50 Sq mm X 3.5 core core coreXLPE insulated, 1100V gradearmoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I U.G. CABLES Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Supply of 3 Core 2.5 Sqmm with ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990.Makes:Finolex/RRKabel/Polycab/Havells/KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)

Providing Pressure testing of entire system with Nitrogen and vacuuming nitrogen for all indoor and outdoor units. The pressure testing shall be done as per OEM recommendation.

Supply and fixing of 4.0 KVA 1-phase, automatic Electronic Voltage Stabilizer.Makes: V-Guard / Real Guard / Uni Stab / ITL

Rewinding of ceiling fan motor (starting and running winding) including all necessary material. The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation material and making connections etc. as required. (New model ceiling fan)

Charges for oiling, greasing, overhauling of ceiling fan, table fan, pedestal fan irrespective to the size of fan including removing, refixing of fan from site and testing etc. as required

Providing and Replacement of ball bearing of ceiling/ exhaust fan as required. (NBC/ SKF)

Providing and Replacement of Gun metal bush of ceiling/ exhaust/cooler fan/ as required.

Spray painting of ceiling fan of size 900/1200/ 1400 mm with two coats of white/ brown enameled paint after cleaning with sandpaper. Filling etc. as required.

Rewinding of Heavy-duty Exhaust fan motor including all necessary material, The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation material and making connections etc. as required. 300/ 380 mm sweep

Rewinding of Heavy-duty Exhaust fan motor including all necessary material, The motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation material and making connections etc. as required. 300/ 380 mm sweep 450 mm sweep.

Rewinding of 400 mm table fan/pedestal fan motor including all necessary material, the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enameled wire with 'E' class insulation material and making connections etc. as required.

Rewinding of 3.0 H.P.- three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of 5.0 H.P.- three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of 7.5 H.P.- three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Rewinding of 15.0 H.P.- three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required make it in perfect working condition.

Taking down the indoor and outdoor units by pumpdown the refrigerent gas & Overhauling and servicing the Split type 1/1.5/2.0 Ton AC Machine by Cleaning through the water jet pump with condenser cooling Coil etc., by blower and oiling the Fan Motor for the indoor and outdoor units and Cleaning all parts and putting the machine in working condition for the indoor and outdoor units if required at site all as directed by the Engr-in-Charge (Note: The rate deems to be inclusive of replacement of filter, charging of refrigerent gas, Starting/running capacitors, Electrical wiring intacts, condensing water line intacts & performance test and if any minor parts required at site)

Supply and fixing of 230V/ 275V, 50Hz rating of 20-60 micro farad.Starting capacitor

Supply and fixing of 230V/ 275V, 50Hz rating of 80-150 micro farad.Starting capacitor

Supply, Fabrication of 1set MS bracket suitable for fixing outdoor unit of split AC unit.

Supply and fixing Supply and laying of 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and fixing Supply and fixing of MS stand for fixing outdoor unit

Supply and fixing Supply and filling of R-22 Refrigerant Gas.( for payment & measurement methodology by weighing the gas cylinder before and after charging for how much gas have been charged.)

Supply and fixing Supply and fixing of Copper Refrigerant Piping of 7/8” dia

Supply and fixing Supply and fixing of water drain pipe line (1” PVC Pipe)

Supply and fixing Supply and providing of pipeline nitrle rubber insulation for Refrigerant and drain pipe lines

Supply and fixing 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length

Supply and fixing 6 Metre Length Double Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length

Air filter suitable for 1/1.50/2 Ton Split A.C. Unit P.V.C. / NYLON if required at site all as directed by the Engr-in-Charge

Fan blade for 1.0 / 1.5 /2 Ton A.C. Machine if required at site all as directed by the Engr-in-Charge

Installation of Split Air Conditioners if required at site all as directed by the Engr-in-Charge

Removing of existing Split Air Conditioners without damaging to copper pipe if required at site all as directed by the Engr-in-Charge

Repairs and Installation of existing PCB in 1.0 / 1.5 / 2.0 Ton Split A.C. Unit if required at site all as directed by the Engr-in-Charge

Servicing the Split type 1/1.5/2.0 Ton AC Machine by Cleaning through the water jet pump with condenser cooling Coil etc., by blower and oiling the Fan Motor for the indoor and outdoor units and Cleaning all parts and putting the machine in working condition and charging the refrigeranet gas if required basis only at site all as directed by the Engr-in-Charge. (Note :1. If requirement of refrigerent gas is essential basis will be measured and paid under separate item. ie.for methodology by weighing the gas cylinder before and after charging for how much gas have been charged. 2. Otherwise servicing only accounted for this item).

Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers)POLE BRACKETS

Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec Analog type (96 mm x 96 mm)

Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required. Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec Digital type

Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Below 500 A /Above 500A Make: Conzerve/Elmeasure/Meco/HPL/L&T/ socomecAnalog type (96 mm x 96 mm)

Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Below 500 A /Above 500A Make: Conzerve/Elmeasure/Meco/HPL/L&T/ socomec: Digital type (96 mm x 96 mm)

Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required : Red/yellow/Green colour

Supply and Fixing of 240/220 V, LED (22.5 mm dia) Pilot lamp with integral circuit, terminal block, including connection etc. as required :Blue colour

Supply and fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL : Non-luminous type

Supply and fixing of push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. Make:Seimens/ ABB/ Schneider/L&T/C&S/HPL : luminous type

Routine maintenance of transformer including testing of insulation resistance, oil breakdown strength. Reconditioning / replacement of silica zel, cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil).

Testing of Transformer oil for dielectric breakdown strength duly tested from the authorised agency/dealer.

Testing of Transformer oil for Acidity analysis strength test report duly tested from the authorised agency/dealer.

Supply of new and tested transformer oil as per IS- 335 - 1972 (per Ltr)

Filtration and de-hydration of transformer oil as per ISS specifications filters to dielectric strength above 40KV …….at site. (Per Ltr)

Supply and fixing of 12V 180 AH SMF battery with 3 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and fixing of 12V 18 AH SMF battery with 3 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and fixing of 12V 9 AH SMF battery with 3 years warranty, including wire leads, connections etc complete. Makes: Quanta / Racket / Exide.

Supply and fixing including Transportation of 5 HP Three phase open well ISI submersible motor pumpset confirms to IS 14220: 1994. . Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi

Supply and fixing including Transportation of 7.5 HP Three phase open well ISI submersible motor pumpset confirms to IS 14220: 1994. . Makes:Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi

Supply and fixing of 12" Cabin Fan including wirring and connections etc complete.Makes: Almonard/Reni

Servicing and Testing of HT 11 KV VCB Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing and Testing of LT ACB of 5000 Amps rating Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing and Testing of LT ACB of 4000 Amps rating Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing and Testing of LT ACB of 3200 Amps rating Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing and Testing of LT ACB of 2500 Amps rating Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing and Testing of LT ACB of 2000 Amps rating Panel from the authorised OEM/Agency/dealer and obtain the necessary testing and service report all as specified and as directed by the Engr-in-Charge.

Servicing, Testing and Calibration of Differential type Relays, Auxiliary Relays, Trip Circuit Supervision Relays and Master Trip Relays and all connected items in the Power House HT/LT Panels Panel Board with repairs/replacement of any spares required at site from the authorised OEM/Agency/dealer and obtain the necessary calibration certificate and all as directed by the Engr-in-Charge.

Servicing, Testing and Calibration of Earth Fault Relays, Over Current Relays, and all connected items in the Power House HT/LT Panels Panel Board with repairs/replacement of any spares required at site from the authorised OEM/Agency/dealer and obtain the necessary calibration certificate and all as directed by the Engr-in-Charge.

Diesel Carriages charges as per Martket Rate Analysis by barrel can 200 Litres

Supply of Diesel Charges for 2000 KVA Diesel Generator as per the direction of Engineer-in-Charge (Computorised Bills to be provided.) Note :1. The contractor/Agency should purchase & Pour the Diesel in front of Engineer-in-Charge. 2. The Diesel Tank for the DG Set should be provided with lock & key with sealing arrangement as per the direction of Engineer-in-Charge. 3. A surprice check will be carried out by the Department/Engineer-in-Charge without any prior notice.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600mmx600mmx6 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and all as directed by the Engr-in-Charge.

Earthing with Copper earth plate 600mmx600mmx3 mm including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and all as directed by the Engr-in-Charge.

Supplying and laying 25x5mm thick GI earth strip at 0.50 meter below ground level as searth electrode, including connection/terminating with nut, bolt, spring, washer etc as required with 2 sets of GI nut bolt & spring washer spaced at 50 mm and all as directed by the Engr-in-Charge.

Supplying and laying 25x3mm thick copper earth strip at 0.50 meter below ground level as searth electrode, including connection/terminating with nut, bolt, spring, washer etc as required with 2 sets of brass nut bolt & spring washer spaced at 50 mm and all as directed by the Engr-in-Charge.

Supply & Fix Heavy duty Box type Capacitors of rating 25 KVAR. Make: L&K

Supply & Fix Heavy duty Box type Capacitors of rating 50 KVAR. Make: L&K

Supply & Fix Heavy duty Box type Capacitors of rating 100 KVAR. Make: L&K

Supply & Fix Power Contactor, MNX-80, 80-100 Amps rating. Make: L&K

Supply & Fix Power Contactor, MNX-140, 140-160 Amps rating. Make: L&K

Supply & Fix Power Contactor, MNX-225, 225-300 Amps rating. Make: L&K

Supply and fixing of DOL Starter in sheet steel enclosure type MN/ML, AC , 3 Phase, 415 Volts, 50 Hz suitable for Upto 10 HP Motor all as required at site and as directed by the Engr-in-Charge.

Supply and fixing of Fully automatic Star Delta Starter in sheet steel enclosure type MN/ML, AC , 3 Phase, 415 Volts, 50 Hz suitable for Upto 17.5 HP Motor all as required at site and as directed by the Engr-in-Charge.

Supply and mix DAP (diammonium Phosphate) in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Supply and mix Urea industrial grade in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Supply and mix Sodium Hypo Chlorite Solution in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Supply and mix Hydrated Lime Chemical Solution in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Supply and mix Industrial grade Alum Chemical Solution in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Supply and mix Bleaching Powder in the STP and ETP all as required at site and as directed by the Engr-in-Charge.

Servicing and cleaning of existing Smoke detector and fire alarm system to made fully functional the visual indication, monitoring system including connections, interconnections and made functional for the locking arrangements with key including proper checking for loop connections and fixing new batteries as required at site etc all as directed by the Engr-in-Charge. Note:- Batteries will be measured and paid under separate items.

Servicing of CI Sluice valve of size 200 including necessary rubber gasket all as directed by the Engr-in-Charge.

Servicing of CI Sluice valve of size 150 all as directed by the Engr-in-Charge.

Supply and Fix 15 mm dia pendent Sprinkler all as directed by the Engr-in-Charge.

Supply and Fix pressure switch in MS pipe line including all connections with siphon all as directed by the Engr-in-Charge.

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Refilling-6 Kg ABC Stored Pressure type Fire Extinguisher IS 2190 Incluing tranportation and Refixing in good condition as directed by Engineer In-charge

Refilling- 4.5Kg CO2type Fire Extinguisher as per IS 2190 Incluing tranportation and Refixing in good condition as directed by Engineer In-charge

Engaging of 1 No Charge Electrician for day to day maintenance of Electrical maintenance works and to monitor these works are properly attended and to take care of complaints arised related to repairs / replacement of damaged fittings / fixtures in the campus such as switches, sockets, switch boards, HT/LT Panels , MCBs, MCB DBs, MCCBs, SFUs, FSUs etc., and all types of fans / light fittings, UG cables etc., complete all as directed by the Engineer-in-charge. ( 01 No.) (Qualification: Diploma in Electrical Engineering with 10 years related experience/ITI with 12 years or experience (supervisory) in maintenance job) (Qualification: ITI certificate with 03 years experience in operation of 11KV / 415V Substation and equipment and DG Sets along with valid 11KV /415V Supervisor permit /C- certificate/grade C-License Holder) (Higly Skilled). He is resposonsible to maintain & update the all logbook/log sheets and prepare the Duty Rosters as per the direction of Engineer-in-Charge and all as directed for preventive maintenace E&M equipment(Lifts,panels,Substation,DG sets,Fire equipment,RO,STP&ETP etc...) with respective staff.[1 No Charge Electrician for day to day maintenance ( Highly Skilled)]. Note:- 1. He is the responsible for maintain the day to day complaint Register, Preperation of Duty Roster, Material Consumption Register, Log Book/Log sheets and to up keep the neat & Tidy of installations with installed plants & machinaries as per the direction of Engineer-in-Charge.

Engaging Substaion attendant Cum DG Operator cum Panel opearator for day to day operation of Substation, DG sets, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, UG cables etc complete all as directed by the Engineer-in-charge. and also Preventive maintenance of above mentioned equipment as per standerd check list and maintain logbooks along with shift register to be updated daily etc to be maintained as directed by engineer-incharge.. Skilled (ITI Certificate with 3 Years Experience)- 4 Nos Note: 1. During Gen Shift, DG Opr cum Panel Board Operator can do the Electrical day to day complaints/maintenance work as per the direction of Engr-in-Charge.

Engaging Lift operator for day to day ( 5 Nos) Lift Operator is responsible for the safe operation of elevators and lifts. Here are some common duties and tasks associated with this role: Loading and Unloading: Lift Operators assist passengers in safely loading and unloading ski lifts or other types of elevators. Safety and Comfort: They ensure the safety and comfort of passengers during lift operations. Maintenance: Operators maintain the lift area, keeping it clean and organized. They also implement emergency procedures when necessary. Evacuation: In case of disabled lifts or emergencies, Lift Operators evacuate passengers as per established protocols.[Supervision: Some operators supervise the lift operations ] (Semi-Skilled-5 Nos ) ITI with 1 Year experience Operation & maintain of Lifts.

STP & ETP Operator:Engaging STP & ETP Plant operator for day to day ( 2 Nos) STP & ETP Plants Operator is responsible for the safe operation of Plants. Operate and monitor STP & ETP Plants equipment and machinery. Perform routine maintenance and inspections of the treatment plant. Collect and test water samples to ensure compliance with safety standards and including mixing of chemicals .Document operational data and report any irregularities. Troubleshoot and resolve operational issues promptly. Ensure safe work practices and compliance with safety regulations. Coordinate with maintenance personnel for repairs and upgrades. etc..as directed by Engineer In-Charge. ( Semi-Skilled- 2Nos ) ITI with 1 Year experience Operation of STP & ETP

RO Operator-1No:RO Plants operator for day to day RO Plant Operator is responsible for the safe operation of Plants. Operate and monitor RO Plants equipment and machinery. Operate and monitor water treatment equipment and processes to ensure the delivery of clean and safe drinking water ,Document operational data and report any irregularities.Troubleshoot and resolve operational issues promptly.Ensure safe work practices and compliance with safety regulations.Coordinate with maintenance personnel for repairs and upgrades etc..as directed by Engineer In-Charge. ( Semi-Skilled-1 NO) ITI with 1 Year experience Operation of RO Plant & Maintenance.

Engaging a Fire Fighting Technician for day to day maintenance and operation of Fire pump house by operating of Diesel Engine,Jockey pump,Booster pump, presurization pump, terrace pump, diesel pumpmaintenance of fire panels and other equipments pertains to fire fighting system etc to maintain required water pressure at all times in External and internal fire hydrants, Hose reels etc complete all as directed by Engineer in charge. ( 3 Nos - Fire fighting technician- skilled) (ITI Certificate with 3 Years Experience in Fire Safety).

Engaging an Electrician for day to day maintenance of Electrical works like repairs to internal and external electric supply by replacing the worne out fittings/fixtures , reparing the unserviceable fittings/ fixtures such as switches, sockets, switch boards, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, OH lines, UG cables, DG Set etc complete all as directed by the Engineer-in-charge. (3 Nos Electrician- Skilled) (ITI Certificate with 3 Years Experience).

Helper to Electrician for day to day maintenance of Electrical works like repairs to internal and external electric supply by replacing the worne out fittings/fixtures , reparing the unserviceable fittings/ fixtures such as switches, sockets, switch boards, LT Panels , MCBs, MCB DBs, MCCBs, SFUs FSUs etc and all types of fans/ light fittings, OH lines, UG cables etc complete all as directed by the Engineer-in-charge. ( 3 Nos Un Skilled)

Engaging of 1 No 'C' Licence Holder of day to day maintenance of Electrical maintenance works and to monitor these works are properly attended and to take care of complaints arised related to repairs / replacement of damaged fittings / fixtures in the campus such as switches, sockets, switch boards, HT/LT Panels , MCBs, MCB DBs, MCCBs, SFUs, FSUs etc., and all types of fans / light fittings, UG cables etc., complete all as directed by the Engineer-in-charge. ( 01 No.) (Qualification: Diploma in Electrical Engineering with 10 years related experience/ITI with 12 years or experience (supervisory) in maintenance job) (Qualification: ITI certificate with 03 years experience in operation of 11KV / 415V Substation and equipment and DG Sets along with valid 11KV /415V Supervisor permit /C- certificate/grade C-License Holder) (Higly Skilled). He is resposonsible to maintain & update the all logbook of preventive maintenace E&M equipment(Lifts,panels,Substation,DG sets,Fire equipment,RO,STP&ETP etc...) with respective staff.[1 No 'C' Licence Holder ( Highly Skilled)]. Note:- 1. He is the responsible for HT Metering cubicle to monitor & maintain all parameter readings. 2. He is the responsible for timely calibration of HT VCB's, LT ACB's/MCCBs and Earth Fault Relays and Over Current Relays. 3. He is the responsible for HT Panels, Transformers, ACBs, MCCBs, APFC Panels with connected Capacitor Banks, Power Contactors & Relays, Up Keep & maintain records for earth results in the HT & LT installations as per the direction of Engr-in-Charge. 4. During Main EB supply failure to monitor the running of stand by DG Sets and maintain the Plant Running Record Book with all parameters and Earth test Register & Insulation test register, fire alaram, smoke detection and fire fighting register all as directed. 5. To maintain the EB Shutdown Register & obtain the necessary signature from EB authorities . (It should be talley with Stand By DG Set PRRB)

Old unserviceable fans off sizes obtained from BOQ Item No.104,106,109 & 123

Old unserviceable Batteries off sizes obtained from BOQ Item No.192,193, & 194

Aluminium Scrap obtained from Old unserviceable aluminium wirings, lugs and aluminium Cables & connected items from BOQ Item Nos.(1 to 3)+ (52 to 63)+ (127 to 130)+ 134+(139 to 143)+145

Iron Scrap obtained from Old unserviceable items from BOQ Item Nos.(4 to5)+ (26 to 51)+ (65 to 68)+ (73 to 86)+(89 to 103)+105+(107 to 108)+(110 to 122)+124+(144,146,147)+(161 to 186)+(208 to 220+230 to 232)

Copp Scrap obtained from Old unserviceable items from BOQ Item Nos.(148) + (153 to 159)

Please Enable Macros to View BoQ information