Drilling of Borewell and Pumping main to 100 KL Sump at New Thupakulagudem of Kannaigudem Mandal

Supply and Deleviery of Pipe line as per IS:4985/1988 with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes.

E/w excavation in loamy, clayey soils like B.C soils red earth and ordinary gravels for pipe line trenches of size (0.70x1) and depositing on banks with an initial lead of 10m and lift of 2m including lowering,laying,jointing of pvc pipes into the readymade trenches and true to the alignment and gradient,refilling thetrenches with excavated earth etc., complete.

Drilling of 6 1/2" DTH Bore Well in all strata including fixing casing pipes etc. Complete in location 1

Cost of 180 mm dia PVC Plain Casing pipe of 6Kg/cm2

Cost of 180 mm dia PVC Slotted Casing pipe of 6Kg/cm2

Geologist Charges

Supply and Transportation of star rated 5 Hp, 5-10 stages, Three phase ISI submersible motor pumpset suitable for 6" Bore well.

Supply and Transportation of control panel for three phase submersible motors up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and delivery of UPVC Raising Column Pipes of Nominal diameter of Standard 60/50 mm for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights

Supply, Transportation and fixing of Seamless cast iron adopter assembly OD 60mm (Two Nos at bottom of the pipe to coupling to the pump set and the other at top end of the pipes) for installing the pump set with pipes including cost and conveyance of all materials, taxes etc., complete.

Supply of 10.0 sqm WPSC (Weather Proof Single Core) ISI Alluminium Wire.

Supply of 3 Core 4.0 sqmm Flat Copper cable of ISI for Submersible Motors.

Supply, Transportation and fixing of 50mm dia, 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.

Supply and Delivery of 150 mm dia Galvanized bore cover

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

Supply, Transportation and fixing of 50mm dia 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete.

Supply, Transportation and fixing of following MS threaded Flanges 2 Nos with nuts and bolts including cost and conveyance of all materials, taxes etc., complete.

Supply, installation, testing and commissioning of 50mm dia C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required

Erection and transportation of pumpset

Drilling of 6 1/2" DTH Bore Well in all strata including fixing casing pipes etc. Complete in location 2

Cost of 180 mm dia PVC Plain Casing pipe of 6Kg/cm2

Cost of 180 mm dia PVC Slotted Casing pipe of 6Kg/cm2

Geologist Charges

Supply and Transportation of star rated 5 Hp, 5-10 stages, Three phase ISI submersible motor pumpset suitable for 6" Bore well.

Supply and Transportation of control panel for three phase submersible motors up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and delivery of UPVC Raising Column Pipes of Nominal diameter of Standard 60/50 mm for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights

Supply, Transportation and fixing of Seamless cast iron adopter assembly OD 60mm (Two Nos at bottom of the pipe to coupling to the pump set and the other at top end of the pipes) for installing the pump set with pipes including cost and conveyance of all materials, taxes etc., complete.

Supply of 10.0 sqm WPSC (Weather Proof Single Core) ISI Alluminium Wire.

Supply of 3 Core 4.0 sqmm Flat Copper cable of ISI for Submersible Motors.

Supply, Transportation and fixing of 50mm dia, 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.

Supply and Delivery of 150 mm dia Galvanized bore cover

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

Supply, Transportation and fixing of 50mm dia 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete.

Supply, Transportation and fixing of following MS threaded Flanges 2 Nos with nuts and bolts including cost and conveyance of all materials, taxes etc., complete.

Supply, installation, testing and commissioning of 50mm dia C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required

Erection and transportation of pumpset